<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 TRANSITIONAL//EN">
<HTML>
<HEAD>
<META HTTP-EQUIV="Content-Type" CONTENT="text/html; CHARSET=UTF-8">
<META NAME="GENERATOR" CONTENT="GtkHTML/3.28.3">
</HEAD>
<BODY>
solo -s, non distruttivo comunque (ro)...<BR>
<BR>
la roba importante era backuppata x fortuna...<BR>
ma speravo di recuperare anche qualcosa del resto....<BR>
mi sa tanto che finirà nel cesso... cribbio :-)<BR>
<BR>
bestemmio-ma-non-credo...<BR>
<BR>
ciao<BR>
grazie<BR>
Lk<BR>
<BR>
<BR>
<BR>
Il giorno gio, 06/10/2011 alle 22.19 +0200, ADB ha scritto:
<BLOCKQUOTE TYPE=CITE>
<PRE>
E' vero che quando SMART ti avverte non sempre dice il vero....ma
cazpita...."della serie non dire che non te l'avevo detto"...
Se i dati sono "importanti" l'unica cosa da fare (sperando che sia
l'elettronica come spero) è procurarsi un hdd uguale, andare in camera
bianca e sostituirla quindi recuperare i brandelli che sono rimasti .
Spero che tu abbia lanciato "badblocks -nvs " (non distruttivo).
AMEN
albertux
2011/10/6 Luca Lanari <<A HREF="mailto:luca_lanari@libero.it">luca_lanari@libero.it</A>>:
> ciao a tutti...
>
> mi si è schiantato stanotte un hdd seagate da 500GB...
> dopo qualche gg che smart mi avvisava che stava per succedere...
>
> --------------
>
> questi i messaggi di smart negli ultimi giorni:
>
>
> The following warning/error was logged by the smartd daemon:
>
> Device: /dev/sdb, ATA error count increased from 1929 to 2223
>
> ...
> e altri simili
>
> --------------
>
> il mount non me lo fa più (lo facevo per UUID e ora mi dice che non
> esiste...)
>
> se faccio:
>
> sudo tune2fs -l /dev/sdb
>
> mi dice:
>
> tune2fs 1.41.11 (14-Mar-2010)
> tune2fs: Bad magic number in super-block durante l'apertura di /dev/sdb
> Impossibile trovare un valido superblocco per il filesystem.
>
> ora sto aspettando (da 5 ore) badblock -s
>
> avete qualche idea su come provare a recuperare qualcosa?
> (dopo che badblock finisce?!?... è al 3.5%... no comment....)
>
> ho paura che si possa essere fottuta l'elettronica (è acceso da 4 anni, a
> parte qualche off di qualche ora o gg al max...)
> anche se gparted me lo vede (ma non riconosce alcun filesystem)
>
> ----------
>
> da smart:
>
> === START OF INFORMATION SECTION ===
> Model Family: Seagate Barracuda 7200.11
> Device Model: ST3500820AS
> Serial Number: 9QM3847J
> Firmware Version: SD81
> User Capacity: 500,107,862,016 bytes
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 8
> ATA Standard is: ATA-8-ACS revision 4
> Local Time is: Thu Oct 6 17:36:15 2011 CEST
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> ----------------------
>
> da syslog:
>
> Oct 6 17:40:01 localhost kernel: [33348.976042] ata2: EH in SWNCQ
> mode,QC:qc_active 0x1 sactive 0x1
> Oct 6 17:40:01 localhost kernel: [33348.976047] ata2: SWNCQ:qc_active 0x1
> defer_bits 0x0 last_issue_tag 0x0
> Oct 6 17:40:01 localhost kernel: [33348.976049] dhfis 0x1 dmafis 0x1
> sdbfis 0x0
> Oct 6 17:40:01 localhost kernel: [33348.976052] ata2: ATA_REG 0x41 ERR_REG
> 0x40
> Oct 6 17:40:01 localhost kernel: [33348.976054] ata2: tag : dhfis dmafis
> sdbfis sacitve
> Oct 6 17:40:01 localhost kernel: [33348.976057] ata2: tag 0x0: 1 1 0 1
> Oct 6 17:40:01 localhost kernel: [33348.976066] ata2.00: exception Emask
> 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
> Oct 6 17:40:01 localhost kernel: [33348.976068] ata2.00: Ata error.
> fis:0x21
> Oct 6 17:40:01 localhost kernel: [33348.976072] ata2.00: failed command:
> READ FPDMA QUEUED
> Oct 6 17:40:01 localhost kernel: [33348.976079] ata2.00: cmd
> 60/08:00:58:13:c7/00:00:01:00:00/40 tag 0 ncq 4096 in
> Oct 6 17:40:01 localhost kernel: [33348.976081] res
> 41/40:00:58:13:c7/40:00:01:00:00/40 Emask 0x9 (media error)
> Oct 6 17:40:01 localhost kernel: [33348.976084] ata2.00: status: { DRDY ERR
> }
> Oct 6 17:40:01 localhost kernel: [33348.976086] ata2.00: error: { UNC }
> Oct 6 17:40:01 localhost kernel: [33348.976091] ata2: hard resetting link
> Oct 6 17:40:01 localhost kernel: [33348.976093] ata2: nv: skipping
> hardreset on occupied port
> Oct 6 17:40:02 localhost kernel: [33349.462534] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl 300)
> Oct 6 17:40:02 localhost kernel: [33349.520525] ata2.00: configured for
> UDMA/133
> Oct 6 17:40:02 localhost kernel: [33349.520541] sd 1:0:0:0: [sdb] Unhandled
> sense code
> Oct 6 17:40:02 localhost kernel: [33349.520543] sd 1:0:0:0: [sdb] Result:
> hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Oct 6 17:40:02 localhost kernel: [33349.520547] sd 1:0:0:0: [sdb] Sense Key
> : Medium Error [current] [descriptor]
> Oct 6 17:40:02 localhost kernel: [33349.520552] Descriptor sense data with
> sense descriptors (in hex):
> Oct 6 17:40:02 localhost kernel: [33349.520554] 72 03 11 04 00 00
> 00 0c 00 0a 80 00 00 00 00 00
> Oct 6 17:40:02 localhost kernel: [33349.520562] 01 c7 13 58
> Oct 6 17:40:02 localhost kernel: [33349.520566] sd 1:0:0:0: [sdb] Add.
> Sense: Unrecovered read error - auto reallocate failed
> Oct 6 17:40:02 localhost kernel: [33349.520570] sd 1:0:0:0: [sdb] CDB:
> Read(10): 28 00 01 c7 13 58 00 00 08 00
> Oct 6 17:40:02 localhost kernel: [33349.520578] end_request: I/O error, dev
> sdb, sector 29823832
> Oct 6 17:40:02 localhost kernel: [33349.520583] Buffer I/O error on device
> sdb, logical block 3727979
> Oct 6 17:40:02 localhost kernel: [33349.520603] ata2: EH complete
> Oct 6 17:40:06 localhost kernel: [33353.712403] ata2: EH in SWNCQ
> mode,QC:qc_active 0x1 sactive 0x1
> Oct 6 17:40:06 localhost kernel: [33353.712409] ata2: SWNCQ:qc_active 0x1
> defer_bits 0x0 last_issue_tag 0x0
> Oct 6 17:40:06 localhost kernel: [33353.712410] dhfis 0x1 dmafis 0x1
> sdbfis 0x0
> Oct 6 17:40:06 localhost kernel: [33353.712414] ata2: ATA_REG 0x41 ERR_REG
> 0x40
> Oct 6 17:40:06 localhost kernel: [33353.712416] ata2: tag : dhfis dmafis
> sdbfis sacitve
> Oct 6 17:40:06 localhost kernel: [33353.712418] ata2: tag 0x0: 1 1 0 1
> Oct 6 17:40:06 localhost kernel: [33353.712428] ata2.00: exception Emask
> 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
> Oct 6 17:40:06 localhost kernel: [33353.712431] ata2.00: Ata error.
> fis:0x21
> Oct 6 17:40:06 localhost kernel: [33353.712434] ata2.00: failed command:
> READ FPDMA QUEUED
> Oct 6 17:40:06 localhost kernel: [33353.712441] ata2.00: cmd
> 60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
> Oct 6 17:40:06 localhost kernel: [33353.712443] res
> 41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
> Oct 6 17:40:06 localhost kernel: [33353.712446] ata2.00: status: { DRDY ERR
> }
> Oct 6 17:40:06 localhost kernel: [33353.712448] ata2.00: error: { UNC }
> Oct 6 17:40:06 localhost kernel: [33353.712453] ata2: hard resetting link
> Oct 6 17:40:06 localhost kernel: [33353.712455] ata2: nv: skipping
> hardreset on occupied port
> Oct 6 17:40:07 localhost kernel: [33354.200036] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl 300)
> Oct 6 17:40:07 localhost kernel: [33354.263014] ata2.00: configured for
> UDMA/133
> Oct 6 17:40:07 localhost kernel: [33354.263026] ata2: EH complete
> Oct 6 17:40:09 localhost kernel: [33357.080542] ata2: EH in SWNCQ
> mode,QC:qc_active 0x1 sactive 0x1
> Oct 6 17:40:09 localhost kernel: [33357.080548] ata2: SWNCQ:qc_active 0x1
> defer_bits 0x0 last_issue_tag 0x0
> Oct 6 17:40:09 localhost kernel: [33357.080549] dhfis 0x1 dmafis 0x1
> sdbfis 0x0
> Oct 6 17:40:09 localhost kernel: [33357.080552] ata2: ATA_REG 0x41 ERR_REG
> 0x40
> Oct 6 17:40:09 localhost kernel: [33357.080555] ata2: tag : dhfis dmafis
> sdbfis sacitve
> Oct 6 17:40:09 localhost kernel: [33357.080557] ata2: tag 0x0: 1 1 0 1
> Oct 6 17:40:09 localhost kernel: [33357.080566] ata2.00: exception Emask
> 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
> Oct 6 17:40:09 localhost kernel: [33357.080569] ata2.00: Ata error.
> fis:0x21
> Oct 6 17:40:09 localhost kernel: [33357.080573] ata2.00: failed command:
> READ FPDMA QUEUED
> Oct 6 17:40:09 localhost kernel: [33357.080580] ata2.00: cmd
> 60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
> Oct 6 17:40:09 localhost kernel: [33357.080581] res
> 41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
> Oct 6 17:40:09 localhost kernel: [33357.080584] ata2.00: status: { DRDY ERR
> }
> Oct 6 17:40:09 localhost kernel: [33357.080587] ata2.00: error: { UNC }
> Oct 6 17:40:09 localhost kernel: [33357.080591] ata2: hard resetting link
> Oct 6 17:40:09 localhost kernel: [33357.080594] ata2: nv: skipping
> hardreset on occupied port
> Oct 6 17:40:10 localhost kernel: [33357.560035] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl 300)
> Oct 6 17:40:10 localhost kernel: [33357.620515] ata2.00: configured for
> UDMA/133
> Oct 6 17:40:10 localhost kernel: [33357.620530] ata2: EH complete
> Oct 6 17:40:13 localhost kernel: [33360.403845] ata2: EH in SWNCQ
> mode,QC:qc_active 0x1 sactive 0x1
> Oct 6 17:40:13 localhost kernel: [33360.403851] ata2: SWNCQ:qc_active 0x1
> defer_bits 0x0 last_issue_tag 0x0
> Oct 6 17:40:13 localhost kernel: [33360.403852] dhfis 0x1 dmafis 0x1
> sdbfis 0x0
> Oct 6 17:40:13 localhost kernel: [33360.403855] ata2: ATA_REG 0x41 ERR_REG
> 0x40
> Oct 6 17:40:13 localhost kernel: [33360.403857] ata2: tag : dhfis dmafis
> sdbfis sacitve
> Oct 6 17:40:13 localhost kernel: [33360.403860] ata2: tag 0x0: 1 1 0 1
> Oct 6 17:40:13 localhost kernel: [33360.403870] ata2.00: exception Emask
> 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
> Oct 6 17:40:13 localhost kernel: [33360.403873] ata2.00: Ata error.
> fis:0x21
> Oct 6 17:40:13 localhost kernel: [33360.403876] ata2.00: failed command:
> READ FPDMA QUEUED
> Oct 6 17:40:13 localhost kernel: [33360.403883] ata2.00: cmd
> 60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
> Oct 6 17:40:13 localhost kernel: [33360.403885] res
> 41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
> Oct 6 17:40:13 localhost kernel: [33360.403888] ata2.00: status: { DRDY ERR
> }
> Oct 6 17:40:13 localhost kernel: [33360.403890] ata2.00: error: { UNC }
> Oct 6 17:40:13 localhost kernel: [33360.403895] ata2: hard resetting link
> Oct 6 17:40:13 localhost kernel: [33360.403897] ata2: nv: skipping
> hardreset on occupied port
> Oct 6 17:40:13 localhost kernel: [33360.892533] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl 300)
> Oct 6 17:40:13 localhost kernel: [33360.950531] ata2.00: configured for
> UDMA/133
> Oct 6 17:40:13 localhost kernel: [33360.950548] ata2: EH complete
> Oct 6 17:40:16 localhost kernel: [33363.743900] ata2: EH in SWNCQ
> mode,QC:qc_active 0x1 sactive 0x1
> Oct 6 17:40:16 localhost kernel: [33363.743906] ata2: SWNCQ:qc_active 0x1
> defer_bits 0x0 last_issue_tag 0x0
> Oct 6 17:40:16 localhost kernel: [33363.743907] dhfis 0x1 dmafis 0x1
> sdbfis 0x0
> Oct 6 17:40:16 localhost kernel: [33363.743910] ata2: ATA_REG 0x41 ERR_REG
> 0x40
> Oct 6 17:40:16 localhost kernel: [33363.743912] ata2: tag : dhfis dmafis
> sdbfis sacitve
> Oct 6 17:40:16 localhost kernel: [33363.743915] ata2: tag 0x0: 1 1 0 1
> Oct 6 17:40:16 localhost kernel: [33363.743925] ata2.00: exception Emask
> 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
> Oct 6 17:40:16 localhost kernel: [33363.743928] ata2.00: Ata error.
> fis:0x21
> Oct 6 17:40:16 localhost kernel: [33363.743931] ata2.00: failed command:
> READ FPDMA QUEUED
> Oct 6 17:40:16 localhost kernel: [33363.743938] ata2.00: cmd
> 60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
> Oct 6 17:40:16 localhost kernel: [33363.743940] res
> 41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
> Oct 6 17:40:16 localhost kernel: [33363.743943] ata2.00: status: { DRDY ERR
> }
> Oct 6 17:40:16 localhost kernel: [33363.743945] ata2.00: error: { UNC }
> Oct 6 17:40:16 localhost kernel: [33363.743950] ata2: hard resetting link
> Oct 6 17:40:16 localhost kernel: [33363.743952] ata2: nv: skipping
> hardreset on occupied port
> Oct 6 17:40:17 localhost kernel: [33364.232542] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl 300)
> Oct 6 17:40:17 localhost kernel: [33364.293112] ata2.00: configured for
> UDMA/133
> Oct 6 17:40:17 localhost kernel: [33364.293126] ata2: EH complete
> Oct 6 17:40:19 localhost kernel: [33367.108957] ata2: EH in SWNCQ
> mode,QC:qc_active 0x1 sactive 0x1
> Oct 6 17:40:19 localhost kernel: [33367.108963] ata2: SWNCQ:qc_active 0x1
> defer_bits 0x0 last_issue_tag 0x0
> Oct 6 17:40:19 localhost kernel: [33367.108965] dhfis 0x1 dmafis 0x1
> sdbfis 0x0
> Oct 6 17:40:19 localhost kernel: [33367.108968] ata2: ATA_REG 0x41 ERR_REG
> 0x40
> Oct 6 17:40:19 localhost kernel: [33367.108970] ata2: tag : dhfis dmafis
> sdbfis sacitve
> Oct 6 17:40:19 localhost kernel: [33367.108973] ata2: tag 0x0: 1 1 0 1
> Oct 6 17:40:19 localhost kernel: [33367.108983] ata2.00: exception Emask
> 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
> Oct 6 17:40:19 localhost kernel: [33367.108986] ata2.00: Ata error.
> fis:0x21
> Oct 6 17:40:19 localhost kernel: [33367.108990] ata2.00: failed command:
> READ FPDMA QUEUED
> Oct 6 17:40:19 localhost kernel: [33367.108997] ata2.00: cmd
> 60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
> Oct 6 17:40:19 localhost kernel: [33367.108998] res
> 41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
> Oct 6 17:40:19 localhost kernel: [33367.109001] ata2.00: status: { DRDY ERR
> }
> Oct 6 17:40:19 localhost kernel: [33367.109004] ata2.00: error: { UNC }
> Oct 6 17:40:19 localhost kernel: [33367.109009] ata2: hard resetting link
> Oct 6 17:40:19 localhost kernel: [33367.109012] ata2: nv: skipping
> hardreset on occupied port
> Oct 6 17:40:20 localhost kernel: [33367.590047] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl 300)
> Oct 6 17:40:20 localhost kernel: [33367.653016] ata2.00: configured for
> UDMA/133
> Oct 6 17:40:20 localhost kernel: [33367.653033] ata2: EH complete
> Oct 6 17:40:23 localhost kernel: [33370.457326] ata2: EH in SWNCQ
> mode,QC:qc_active 0x1 sactive 0x1
> Oct 6 17:40:23 localhost kernel: [33370.457331] ata2: SWNCQ:qc_active 0x1
> defer_bits 0x0 last_issue_tag 0x0
> Oct 6 17:40:23 localhost kernel: [33370.457333] dhfis 0x1 dmafis 0x1
> sdbfis 0x0
> Oct 6 17:40:23 localhost kernel: [33370.457336] ata2: ATA_REG 0x41 ERR_REG
> 0x40
> Oct 6 17:40:23 localhost kernel: [33370.457338] ata2: tag : dhfis dmafis
> sdbfis sacitve
> Oct 6 17:40:23 localhost kernel: [33370.457341] ata2: tag 0x0: 1 1 0 1
> Oct 6 17:40:23 localhost kernel: [33370.457350] ata2.00: exception Emask
> 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
> Oct 6 17:40:23 localhost kernel: [33370.457353] ata2.00: Ata error.
> fis:0x21
> Oct 6 17:40:23 localhost kernel: [33370.457356] ata2.00: failed command:
> READ FPDMA QUEUED
> Oct 6 17:40:23 localhost kernel: [33370.457363] ata2.00: cmd
> 60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
> Oct 6 17:40:23 localhost kernel: [33370.457365] res
> 41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
> Oct 6 17:40:23 localhost kernel: [33370.457368] ata2.00: status: { DRDY ERR
> }
> Oct 6 17:40:23 localhost kernel: [33370.457370] ata2.00: error: { UNC }
> Oct 6 17:40:23 localhost kernel: [33370.457375] ata2: hard resetting link
> Oct 6 17:40:23 localhost kernel: [33370.457377] ata2: nv: skipping
> hardreset on occupied port
> Oct 6 17:40:23 localhost kernel: [33370.940070] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl 300)
> Oct 6 17:40:23 localhost kernel: [33371.000519] ata2.00: configured for
> UDMA/133
> Oct 6 17:40:23 localhost kernel: [33371.000536] sd 1:0:0:0: [sdb] Unhandled
> sense code
> Oct 6 17:40:23 localhost kernel: [33371.000538] sd 1:0:0:0: [sdb] Result:
> hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Oct 6 17:40:23 localhost kernel: [33371.000542] sd 1:0:0:0: [sdb] Sense Key
> : Medium Error [current] [descriptor]
> Oct 6 17:40:23 localhost kernel: [33371.000546] Descriptor sense data with
> sense descriptors (in hex):
> Oct 6 17:40:23 localhost kernel: [33371.000549] 72 03 11 04 00 00
> 00 0c 00 0a 80 00 00 00 00 00
> Oct 6 17:40:23 localhost kernel: [33371.000557] 01 cb 08 40
> Oct 6 17:40:23 localhost kernel: [33371.000560] sd 1:0:0:0: [sdb] Add.
> Sense: Unrecovered read error - auto reallocate failed
> Oct 6 17:40:23 localhost kernel: [33371.000565] sd 1:0:0:0: [sdb] CDB:
> Read(10): 28 00 01 cb 08 40 00 00 80 00
> Oct 6 17:40:23 localhost kernel: [33371.000573] end_request: I/O error, dev
> sdb, sector 30083136
> Oct 6 17:40:23 localhost kernel: [33371.000592] ata2: EH complete
> Oct 6 17:40:26 localhost kernel: [33373.822305] ata2: EH in SWNCQ
> mode,QC:qc_active 0x1 sactive 0x1
> Oct 6 17:40:26 localhost kernel: [33373.822311] ata2: SWNCQ:qc_active 0x1
> defer_bits 0x0 last_issue_tag 0x0
> Oct 6 17:40:26 localhost kernel: [33373.822313] dhfis 0x1 dmafis 0x1
> sdbfis 0x0
> Oct 6 17:40:26 localhost kernel: [33373.822316] ata2: ATA_REG 0x41 ERR_REG
> 0x40
> Oct 6 17:40:26 localhost kernel: [33373.822318] ata2: tag : dhfis dmafis
> sdbfis sacitve
> Oct 6 17:40:26 localhost kernel: [33373.822321] ata2: tag 0x0: 1 1 0 1
> Oct 6 17:40:23 localhost kernel: [33370.457370] ata2.00: error: { UNC }
> Oct 6 17:40:23 localhost kernel: [33370.457375] ata2: hard resetting link
> Oct 6 17:40:23 localhost kernel: [33370.457377] ata2: nv: skipping
> hardreset on occupied port
> Oct 6 17:40:23 localhost kernel: [33370.940070] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl 300)
> Oct 6 17:40:23 localhost kernel: [33371.000519] ata2.00: configured for
> UDMA/133
> Oct 6 17:40:23 localhost kernel: [33371.000536] sd 1:0:0:0: [sdb] Unhandled
> sense code
> Oct 6 17:40:23 localhost kernel: [33371.000538] sd 1:0:0:0: [sdb] Result:
> hostbyte=DID_OK driverbyte=DRIVER_SENSE
> Oct 6 17:40:23 localhost kernel: [33371.000542] sd 1:0:0:0: [sdb] Sense Key
> : Medium Error [current] [descriptor]
> Oct 6 17:40:23 localhost kernel: [33371.000546] Descriptor sense data with
> sense descriptors (in hex):
> Oct 6 17:40:23 localhost kernel: [33371.000549] 72 03 11 04 00 00
> 00 0c 00 0a 80 00 00 00 00 00
> Oct 6 17:40:23 localhost kernel: [33371.000557] 01 cb 08 40
> Oct 6 17:40:23 localhost kernel: [33371.000560] sd 1:0:0:0: [sdb] Add.
> Sense: Unrecovered read error - auto reallocate failed
> Oct 6 17:40:23 localhost kernel: [33371.000565] sd 1:0:0:0: [sdb] CDB:
> Read(10): 28 00 01 cb 08 40 00 00 80 00
> Oct 6 17:40:23 localhost kernel: [33371.000573] end_request: I/O error, dev
> sdb, sector 30083136
> Oct 6 17:40:23 localhost kernel: [33371.000592] ata2: EH complete
> Oct 6 17:40:26 localhost kernel: [33373.822305] ata2: EH in SWNCQ
> mode,QC:qc_active 0x1 sactive 0x1
> Oct 6 17:40:26 localhost kernel: [33373.822311] ata2: SWNCQ:qc_active 0x1
> defer_bits 0x0 last_issue_tag 0x0
> Oct 6 17:40:26 localhost kernel: [33373.822313] dhfis 0x1 dmafis 0x1
> sdbfis 0x0
> Oct 6 17:40:26 localhost kernel: [33373.822316] ata2: ATA_REG 0x41 ERR_REG
> 0x40
> Oct 6 17:40:26 localhost kernel: [33373.822318] ata2: tag : dhfis dmafis
> sdbfis sacitve
> Oct 6 17:40:26 localhost kernel: [33373.822321] ata2: tag 0x0: 1 1 0 1
> Oct 6 17:40:26 localhost kernel: [33373.822330] ata2.00: exception Emask
> 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
> Oct 6 17:40:26 localhost kernel: [33373.822333] ata2.00: Ata error.
> fis:0x21
> Oct 6 17:40:26 localhost kernel: [33373.822336] ata2.00: failed command:
> READ FPDMA QUEUED
> Oct 6 17:40:26 localhost kernel: [33373.822343] ata2.00: cmd
> 60/08:00:60:08:cb/00:00:01:00:00/40 tag 0 ncq 4096 in
> Oct 6 17:40:26 localhost kernel: [33373.822345] res
> 41/40:00:60:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
> Oct 6 17:40:26 localhost kernel: [33373.822348] ata2.00: status: { DRDY ERR
> }
> Oct 6 17:40:26 localhost kernel: [33373.822350] ata2.00: error: { UNC }
> Oct 6 17:40:26 localhost kernel: [33373.822355] ata2: hard resetting link
> Oct 6 17:40:26 localhost kernel: [33373.822358] ata2: nv: skipping
> hardreset on occupied port
> Oct 6 17:40:27 localhost kernel: [33374.312535] ata2: SATA link up 3.0 Gbps
> (SStatus 123 SControl 300)
> Oct 6 17:40:27 localhost kernel: [33374.380516] ata2.00: configured for
> UDMA/133
> Oct 6 17:40:27 localhost kernel: [33374.380531] ata2: EH complete
>
>
>
> --
> Mailing list info: <A HREF="http://lists.linux.it/listinfo/gl-como">http://lists.linux.it/listinfo/gl-como</A>
>
>
</PRE>
</BLOCKQUOTE>
<BR>
</BODY>
</HTML>