<div dir="ltr"><div>Ecco qua un po' di smartmontools, non ci capisco una mazza, ma voi si perň :-D<br></div>pippersss<br><div><br>root@debsrv:/home/stefano# smartctl --all /dev/sdb<br>smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)<br>
Copyright (C) 2002-11 by Bruce Allen, <a href="http://smartmontools.sourceforge.net">http://smartmontools.sourceforge.net</a><br><br>=== START OF INFORMATION SECTION ===<br>Model Family: Western Digital Caviar Blue Serial ATA<br>
Device Model: WDC WD800AAJS-60PSA0<br>Serial Number: WD-WCAP93773566<br>LU WWN Device Id: 5 0014ee 1ab2b438c<br>Firmware Version: 21.12M22<br>User Capacity: 80,026,361,856 bytes [80,0 GB]<br>Sector Size: 512 bytes logical/physical<br>
Device is: In smartctl database [for details use: -P show]<br>ATA Version is: 7<br>ATA Standard is: Exact ATA specification draft version not indicated<br>Local Time is: Mon May 13 13:05:18 2013 CEST<br>SMART support is: Available - device has SMART capability.<br>
SMART support is: Enabled<br><br>=== START OF READ SMART DATA SECTION ===<br>SMART STATUS RETURN: incomplete response, ATA output registers missing<br>SMART overall-health self-assessment test result: PASSED<br>Warning: This result is based on an Attribute check.<br>
<br>General SMART Values:<br>Offline data collection status: (0x82) Offline data collection activity<br> was completed without error.<br> Auto Offline Data Collection: Enabled.<br>
Self-test execution status: ( 0) The previous self-test routine completed<br> without error or no self-test has ever <br> been run.<br>Total time to complete Offline <br>data collection: ( 2160) seconds.<br>
Offline data collection<br>capabilities: (0x5b) SMART execute Offline immediate.<br> Auto Offline data collection on/off support.<br> Suspend Offline collection upon new<br>
command.<br> Offline surface scan supported.<br> Self-test supported.<br> No Conveyance Self-test supported.<br> Selective Self-test supported.<br>
SMART capabilities: (0x0003) Saves SMART data before entering<br> power-saving mode.<br> Supports SMART auto save timer.<br>Error logging capability: (0x01) Error logging supported.<br>
General Purpose Logging supported.<br>Short self-test routine <br>recommended polling time: ( 2) minutes.<br>Extended self-test routine<br>recommended polling time: ( 32) minutes.<br>SCT capabilities: (0x103f) SCT Status supported.<br>
SCT Error Recovery Control supported.<br> SCT Feature Control supported.<br> SCT Data Table supported.<br><br>SMART Attributes Data Structure revision number: 16<br>
Vendor Specific SMART Attributes with Thresholds:<br>ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE<br> 1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 178<br>
3 Spin_Up_Time 0x0003 160 157 021 Pre-fail Always - 2966<br> 4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3917<br> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0<br>
7 Seek_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0<br> 9 Power_On_Hours 0x0032 086 086 000 Old_age Always - 10889<br> 10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0<br>
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0<br> 12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3779<br>187 Reported_Uncorrect 0x0032 100 001 000 Old_age Always - 161<br>
188 Command_Timeout 0x0032 001 001 000 Old_age Always - 21475164588<br>190 Airflow_Temperature_Cel 0x0022 079 049 040 Old_age Always - 21<br>192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 265<br>
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 3940<br>194 Temperature_Celsius 0x0022 122 092 000 Old_age Always - 21<br>196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0<br>
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0<br>198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0<br>199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 421<br>
200 Multi_Zone_Error_Rate 0x0008 200 068 051 Old_age Offline - 0<br><br>SMART Error Log Version: 1<br>ATA Error Count: 165 (device log contains only the most recent five errors)<br> CR = Command Register [HEX]<br>
FR = Features Register [HEX]<br> SC = Sector Count Register [HEX]<br> SN = Sector Number Register [HEX]<br> CL = Cylinder Low Register [HEX]<br> CH = Cylinder High Register [HEX]<br> DH = Device/Head Register [HEX]<br>
DC = Device Command Register [HEX]<br> ER = Error register [HEX]<br> ST = Status register [HEX]<br>Powered_Up_Time is measured from power on, and printed as<br>DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,<br>
SS=sec, and sss=millisec. It "wraps" after 49.710 days.<br><br>Error 165 occurred at disk power-on lifetime: 10878 hours (453 days + 6 hours)<br> When the command that caused the error occurred, the device was active or idle.<br>
<br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 10 51 f0 e0 96 01 e0 Error: IDNF 240 sectors at LBA = 0x000196e0 = 104160<br><br> Commands leading to the command that caused the error were:<br>
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 35 00 f0 e0 96 01 00 00 06:03:59.742 WRITE DMA EXT<br> 35 00 f0 f0 95 01 00 00 06:03:59.738 WRITE DMA EXT<br>
35 00 f0 f0 95 01 00 00 06:03:28.833 WRITE DMA EXT<br> 35 00 f0 00 95 01 00 00 06:03:28.828 WRITE DMA EXT<br> 35 00 f0 10 94 01 00 00 06:03:28.812 WRITE DMA EXT<br><br>Error 164 occurred at disk power-on lifetime: 10878 hours (453 days + 6 hours)<br>
When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 10 51 f0 70 61 01 e0 Error: IDNF 240 sectors at LBA = 0x00016170 = 90480<br>
<br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 35 00 f0 70 61 01 00 00 05:40:15.194 WRITE DMA EXT<br>
35 00 f0 70 61 01 00 00 05:39:44.255 WRITE DMA EXT<br> 35 00 f0 80 60 01 00 00 05:39:44.251 WRITE DMA EXT<br> 35 00 f0 80 60 01 00 00 05:39:13.320 WRITE DMA EXT<br> 35 00 f0 90 5f 01 00 00 05:39:13.316 WRITE DMA EXT<br>
<br>Error 163 occurred at disk power-on lifetime: 10877 hours (453 days + 5 hours)<br> When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br>
ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 10 51 f0 00 c3 00 e0 Error: IDNF 240 sectors at LBA = 0x0000c300 = 49920<br><br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br>
-- -- -- -- -- -- -- -- ---------------- --------------------<br> 35 00 f0 00 c3 00 00 00 04:41:55.914 WRITE DMA EXT<br> 35 00 f0 00 c3 00 00 00 04:41:24.979 WRITE DMA EXT<br> 35 00 f0 10 c2 00 00 00 04:41:24.975 WRITE DMA EXT<br>
35 00 f0 20 c1 00 00 00 04:41:24.971 WRITE DMA EXT<br> 35 00 f0 20 c1 00 00 00 04:40:54.027 WRITE DMA EXT<br><br>Error 162 occurred at disk power-on lifetime: 10876 hours (453 days + 4 hours)<br> When the command that caused the error occurred, the device was active or idle.<br>
<br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 10 51 f0 60 90 00 e0 Error: IDNF 240 sectors at LBA = 0x00009060 = 36960<br><br> Commands leading to the command that caused the error were:<br>
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 35 00 f0 60 90 00 00 00 04:23:21.059 WRITE DMA EXT<br> 35 00 f0 60 90 00 00 00 04:22:50.124 WRITE DMA EXT<br>
35 00 f0 70 8f 00 00 00 04:22:50.119 WRITE DMA EXT<br> 35 00 f0 80 8e 00 00 00 04:22:50.115 WRITE DMA EXT<br> 35 00 f0 80 8e 00 00 00 04:22:19.176 WRITE DMA EXT<br><br>Error 161 occurred at disk power-on lifetime: 4534 hours (188 days + 22 hours)<br>
When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 60 24 5e e0 Error: UNC at LBA = 0x005e2460 = 6169696<br>
<br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> c8 00 08 5f 24 5e 00 00 00:06:52.488 READ DMA<br>
c8 00 01 00 00 00 00 00 00:06:52.488 READ DMA<br> c8 00 08 5f 24 5e 00 00 00:06:50.424 READ DMA<br> c8 00 01 00 00 00 00 00 00:06:50.424 READ DMA<br> c8 00 08 67 24 5e 00 00 00:06:50.424 READ DMA<br>
<br>SMART Self-test log structure revision number 1<br>No self-tests have been logged. [To run self-tests, use: smartctl -t]<br><br><br>SMART Selective self-test log data structure revision number 1<br> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS<br>
1 0 0 Not_testing<br> 2 0 0 Not_testing<br> 3 0 0 Not_testing<br> 4 0 0 Not_testing<br> 5 0 0 Not_testing<br>Selective self-test flags (0x0):<br>
After scanning selected spans, do NOT read-scan remainder of disk.<br>If Selective self-test is pending on power-up, resume after 0 minute delay.<br><br></div></div><div class="gmail_extra"><br><br><div class="gmail_quote">
Il giorno 13 maggio 2013 08:14, Stefano Ballardini <span dir="ltr"><<a href="mailto:stefano.ballardini@gmail.com" target="_blank">stefano.ballardini@gmail.com</a>></span> ha scritto:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
<p>Intanto grazie a tutti,<br>
stasera provo a postate i risultati di smartmontools e provo a recuperare i tool di westerndigital per il formattone basso livello... ma con calma, oggi e' la giornata mondiale della lenteeeezzzzaaa a a :-D :-D</p>
<p>pi pper sss</p>
</blockquote></div><br></div>