[Tech] OT: Scheda wi-fi NON prism 2 (abriged)
marcoc1@dada.it
marcoc1@dada.it
Sab 3 Gen 2004 19:35:17 CET
Ho provato (installando solo il driver)
Il risultato e' simile; la scheda viene caricata
dalla pcmcia (la luce si accende) ma sembra non
riesca a mappare la memoria della scheda.
Iwconfig infatti non vede le estesioni per eth1
Precedentemente per far funzionare la pcmcia mi
sono dovuto ricompilare il kernel 2.4.22p9,
altrimenti la pcmcia mi pianta il kernel.
La knoppix-std 1.0b e' l'unica distro che, come per
magia fa funzionare tutto (pcmcia e wireless)
Questo e' l'output di un unload/reload della pcmcia
========================================================
Jan 3 18:38:47 alderaan nmbd[1878]:
Jan 3 18:38:47 alderaan nmbd[1878]: *****
Jan 3 18:39:11 alderaan kernel: hostap_cs: Driver unloaded
Jan 3 18:39:13 alderaan kernel: unloading Kernel Card Services
Jan 3 18:39:15 alderaan kernel: Linux Kernel Card Services 3.1.22
Jan 3 18:39:15 alderaan kernel: options: [pci] [cardbus] [pm]
Jan 3 18:39:16 alderaan kernel: Yenta IRQ list 00b8, PCI irq11
Jan 3 18:39:16 alderaan kernel: Socket status: 30000410
Jan 3 18:39:16 alderaan kernel: Yenta IRQ list 00b8, PCI irq11
Jan 3 18:39:16 alderaan kernel: Socket status: 30000410
Jan 3 18:39:17 alderaan cardmgr[2422]: watching 2 sockets
Jan 3 18:39:17 alderaan cardmgr[2423]: starting, version is 3.2.4
Jan 3 18:39:17 alderaan kernel: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xfffff
Jan 3 18:39:17 alderaan kernel: cs: memory probe 0x60000000-0x60ffffff:
excluding 0x60000000-0x60ffffff
Jan 3 18:39:17 alderaan kernel: cs: memory probe 0xa0000000-0xa0ffffff:
excluding 0xa0000000-0xa0ffffff
Jan 3 18:39:17 alderaan kernel: cs: unable to map card memory!
Jan 3 18:39:17 alderaan kernel: cs: unable to map card memory!
Jan 3 18:39:17 alderaan cardmgr[2423]: socket 0: Anonymous Memory
Jan 3 18:39:17 alderaan kernel: cs: unable to map card memory!
Jan 3 18:39:17 alderaan last message repeated 3 times
Jan 3 18:39:17 alderaan cardmgr[2423]: executing: 'modprobe memory_cs'
Jan 3 18:39:17 alderaan cardmgr[2423]: + modprobe: Can't locate module
memory_cs
Jan 3 18:39:17 alderaan cardmgr[2423]: modprobe exited with status 255
Jan 3 18:39:17 alderaan cardmgr[2423]: module
/lib/modules/2.4.22-pre9/pcmcia/memory_cs.o not available
Jan 3 18:39:18 alderaan cardmgr[2423]: get dev info on socket 0 failed:
Resource temporarily unavailable
Jan 3 18:39:18 alderaan cardmgr[2423]: socket 1: Anonymous Memory
Jan 3 18:39:18 alderaan kernel: cs: unable to map card memory!
Jan 3 18:39:18 alderaan last message repeated 5 times
Jan 3 18:39:19 alderaan cardmgr[2423]: get dev info on socket 1 failed:
Resource temporarily unavailable
=============================================================
Allego anche (scusate ....) il dmesg ed un parziale messages.
Grazie per l'aiuto. Marco
==============================================================Linux
version 2.4.22-pre9 (root@alderaan.homelinux.net) (gcc version 3.2.1
(Mandrake Linux 9.1 3.2.1-5mdk)) #3 Sat Aug 16 23:03:50 CEST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001f7d0000 (usable)
BIOS-e820: 000000001f7d0000 - 000000001f7e0000 (reserved)
BIOS-e820: 000000001f7e0000 - 000000001f7e8000 (ACPI data)
BIOS-e820: 000000001f7e8000 - 000000001f800000 (ACPI NVS)
BIOS-e820: 000000001f800000 - 0000000020000000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
503MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 128976
zone(0): 4096 pages.
zone(1): 124880 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 Acer ) @ 0x000fe030
ACPI: RSDT (v001 Acer TM530 00000.00001) @ 0x1f7e0000
ACPI: FADT (v001 Acer TM530 00000.00001) @ 0x1f7e0054
ACPI: BOOT (v001 Acer TM530 00000.00001) @ 0x1f7e002c
ACPI: DSDT (v001 Acer AN530 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
ACPI: MADT not present
Kernel command line: BOOT_IMAGE=linux-2.4.22p9 ro root=305 devfs=mount
hdc=ide-scsi acpi=ht resume=/dev/hda7
ide_setup: hdc=ide-scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
Detected 1021.704 MHz processor.
Console: colour VGA+ 80x50
Calibrating delay loop... 1854.66 BogoMIPS
Memory: 507636k/515904k available (1311k kernel code, 7880k reserved,
540k data, 120k init, 0k highmem)
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) III Mobile CPU 1000MHz stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 990.7071 MHz.
..... host bus clock speed is 132.0940 MHz.
cpu: 0, clocks: 1320940, slice: 660470
CPU0<T0:1320928,T1:660448,D:10,S:660470,C:1320940>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030619
PCI: PCI BIOS revision 2.10 entry at 0xf0200, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S3 S4bios S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.1
Transparent bridge - Intel Corp. 82801BAM/CAM PCI Bridge
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [PILA] (IRQs *11)
ACPI: PCI Interrupt Link [PILB] (IRQs 10, enabled at IRQ 11)
ACPI: PCI Interrupt Link [PILC] (IRQs *11)
ACPI: PCI Interrupt Link [PILD] (IRQs 10, enabled at IRQ 11)
ACPI: PCI Interrupt Link [PILE] (IRQs 11, enabled at IRQ 10)
ACPI: PCI Interrupt Link [PILF] (IRQs *10)
ACPI: PCI Interrupt Link [PILG] (IRQs 11, disabled)
ACPI: PCI Interrupt Link [PILH] (IRQs 10, disabled)
ACPI: Embedded Controller [EC0] (gpe 29)
PCI: Probing PCI hardware
ACPI: PCI Interrupt Link [PILG] enabled at IRQ 11
ACPI: PCI Interrupt Link [PILH] enabled at IRQ 10
PCI: No IRQ known for interrupt pin A of device 00:1f.1 - using IRQ 255
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even
'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x0f (Driver version 1.16)
apm: overridden by ACPI.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Processor [CPU0] (supports C1 C2 C3, 2 performance states)
ACPI: Thermal Zone [THR1] (51 C)
ACPI: Thermal Zone [THR2] (46 C)
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
ICH3M: IDE controller at PCI slot 00:1f.1
PCI: No IRQ known for interrupt pin A of device 00:1f.1 - using IRQ 255
ICH3M: chipset revision 1
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xa890-0xa897, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xa898-0xa89f, BIOS settings: hdc:DMA, hdd:pio
hda: TOSHIBA MK2018GAP, ATA DISK drive
blk: queue c031a1e0, I/O limit 4095Mb (mask 0xffffffff)
hdc: UJDA720 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 39070080 sectors (20004 MB), CHS=2432/255/63, UDMA(100)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 81k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 120k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 23:57:04 Aug 9 2003
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1d.0 to 64
usb-uhci.c: USB UHCI at I/O 0xa4a0, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.1 to 64
usb-uhci.c: USB UHCI at I/O 0xa4e0, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Setting latency timer of device 00:1d.2 to 64
usb-uhci.c: USB UHCI at I/O 0xa800, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
hub.c: new USB device 00:1d.0-1, assigned address 2
Adding Swap: 530104k swap-space (priority -1)
usb.c: USB device 2 (vend/prod 0x46d/0xc00c) is not claimed by any
active driver.
SCSI subsystem driver Revision: 1.00
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: MATSHITA Model: UJDA720 DVD/CDRW Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,1), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset iso8859-1
MSDOS FS: Using codepage 850
NTFS driver v1.1.22 [Flags: R/O MODULE]
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb1:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
usb.c: registered new driver usbmouse
usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
ohci1394: $Rev: 1010 $ Ben Collins <bcollins@debian.org>
ohci1394_0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[80100000-801007ff] Max
Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023] GUID[1025101f000abf65]
Intel(R) PRO/100 Network Driver - version 2.3.18-k1
Copyright (c) 2003 Intel Corporation
e100: selftest OK.
e100: eth0: Intel(R) PRO/100 Network Connection
Hardware receive checksums enabled
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
ds: no socket drivers loaded!
unloading Kernel Card Services
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
Yenta IRQ list 00b8, PCI irq11
Socket status: 30000410
Yenta IRQ list 00b8, PCI irq11
Socket status: 30000410
cs: memory probe 0x0c0000-0x0fffff: excluding 0xc0000-0xcffff
0xe0000-0xfffff
hostap_crypt: registered algorithm 'NULL'
hostap_cs: 0.1.2 - 2003-11-02 (Jouni Malinen <jkmaline@cc.hut.fi>)
hostap_cs: setting Vcc=33 (constant)
hostap_cs: CS_EVENT_CARD_INSERTION
hostap_cs: setting Vcc=50 (from config)
Checking CFTABLE_ENTRY 0x01 (default 0x01)
IO window settings: cfg->io.nwin=1 dflt.io.nwin=1
io->flags = 0x0046, io.base=0x0000, len=64
hostap_cs: RequestIRQ: Resource in use
eth%d: card already removed or not configured during shutdown
hostap_free_data: ap has not yet been initialized - skip resource
freeing
unregister_netdevice: device eth%d/deaf0000 never was registered
e100: eth0 NIC Link is Up 100 Mbps Full duplex
martian source 255.255.255.255 from 192.168.0.2, on dev eth0
ll header: ff:ff:ff:ff:ff:ff:00:09:5b:2d:f8:2e:08:00
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
Intel 810 + AC97 Audio, version 0.24, 23:55:11 Aug 9 2003
PCI: Setting latency timer of device 00:1f.5 to 64
i810: Intel ICH3 found at IO 0x9c00 and 0x9800, MEM 0x0000 and 0x0000,
IRQ 11
i810_audio: Audio Controller supports 6 channels.
i810_audio: Defaulting to base 2 channel mode.
i810_audio: Resetting connection 0
ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P)
i810_audio: AC'97 codec 0 supports AMAP, total channels = 2
i810_audio: setting clocking to 51752
smbfs: Unrecognized mount option noexec
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 431M
agpgart: Detected an Intel(R) 830M Chipset.
agpgart: Detected 8060K stolen memory.
agpgart: AGP aperture is 128M @ 0x98000000
memory : de69f4e0
memory : de69f560
memory : de69f620
memory : de69f5a0
lp: driver loaded but no devices found
inserting floppy driver for 2.4.22-pre9
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
Loading 1.2 (16[1] devices)...
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
NET4: AppleTalk 0.18a for Linux NET4.0
==================================================================
====================================================================
Jan 3 18:32:09 alderaan syslogd 1.4.1: restart.
Jan 3 18:32:09 alderaan kernel: klogd 1.4.1, log source = /proc/kmsg
started.
.....
Jan 3 18:32:09 alderaan kernel: Mounted devfs on /dev
Jan 3 18:32:09 alderaan kernel: Freeing unused kernel memory: 120k
freed
...
Jan 3 18:32:09 alderaan kernel: usb.c: registered new driver usbmouse
Jan 3 18:32:09 alderaan kernel: usbmouse.c: v1.6:USB HID Boot Protocol
mouse driver
Jan 3 18:32:09 alderaan kernel: ohci1394: $Rev: 1010 $ Ben Collins
<bcollins@debian.org>
Jan 3 18:32:09 alderaan kernel: ohci1394_0: OHCI-1394 1.1 (PCI):
IRQ=[10] MMIO=[80100000-801007ff] Max Packet=[2048]
Jan 3 18:32:09 alderaan kernel: Intel(R) PRO/100 Network Driver -
version 2.3.18-k1
Jan 3 18:32:09 alderaan kernel: Copyright (c) 2003 Intel Corporation
Jan 3 18:32:09 alderaan kernel:
Jan 3 18:32:09 alderaan kernel: e100: eth0: Intel(R) PRO/100 Network
Connection
Jan 3 18:32:09 alderaan kernel: Hardware receive checksums enabled
Jan 3 18:32:09 alderaan kernel:
Jan 3 18:32:09 alderaan kernel: Linux Kernel Card Services 3.1.22
Jan 3 18:32:09 alderaan kernel: options: [pci] [cardbus] [pm]
Jan 3 18:32:09 alderaan kernel: ds: no socket drivers loaded!
Jan 3 18:32:09 alderaan kernel: unloading Kernel Card Services
Jan 3 18:32:09 alderaan kernel: Linux Kernel Card Services 3.1.22
Jan 3 18:32:09 alderaan kernel: options: [pci] [cardbus] [pm]
Jan 3 18:32:09 alderaan kernel: Yenta IRQ list 00b8, PCI irq11
Jan 3 18:32:09 alderaan kernel: Socket status: 30000410
Jan 3 18:32:09 alderaan kernel: Yenta IRQ list 00b8, PCI irq11
Jan 3 18:32:09 alderaan kernel: Socket status: 30000410
Jan 3 18:32:09 alderaan kernel: cs: memory probe 0x0c0000-0x0fffff:
excluding 0xc0000-0xcffff 0xe0000-0xfffff
Jan 3 18:32:09 alderaan kernel: hostap_cs: 0.1.2 - 2003-11-02 (Jouni
Malinen <jkmaline@cc.hut.fi>)
Jan 3 18:32:09 alderaan kernel: hostap_cs: RequestIRQ: Resource in use
Jan 3 18:32:09 alderaan kernel: e100: eth0 NIC Link is Up 100 Mbps Full
duplex
Jan 3 18:32:09 alderaan kernel: martian source 255.255.255.255 from
192.168.0.2, on dev eth0
Jan 3 18:32:09 alderaan kernel: ll header:
ff:ff:ff:ff:ff:ff:00:09:5b:2d:f8:2e:08:00
Jan 3 18:32:09 alderaan kernel: CSLIP: code copyright 1989 Regents of
the University of California
Jan 3 18:32:09 alderaan kernel: PPP generic driver version 2.4.2
......
Jan 3 19:31:46 alderaan rc.sysinit: Mounting proc filesystem succeeded
Jan 3 19:31:46 alderaan rc.sysinit: Setting default font (lat0-16):
succeeded
Jan 3 19:31:48 alderaan devfsd: Started device management daemon
v1.3.25 for /dev
Jan 3 19:31:49 alderaan rc.sysinit: Running DevFs daemon succeeded
Jan 3 19:31:49 alderaan rc.sysinit: Unmounting initrd: succeeded
Jan 3 19:31:49 alderaan rc.sysinit: Configuring kernel parameters:
succeeded
Jan 3 18:31:51 alderaan date: Sat Jan 3 18:31:51 CET 2004
Jan 3 18:31:51 alderaan rc.sysinit: Setting clock (localtime): Sat
Jan 3 18:31:51 CET 2004 succeeded
Jan 3 18:31:51 alderaan rc.sysinit: Loading default keymap succeeded
Jan 3 18:31:51 alderaan rc.sysinit: Setting hostname
alderaan.homelinux.net: succeeded
Jan 3 18:31:51 alderaan usb: Initializing USB controller (usb-uhci):
succeeded
Jan 3 18:31:51 alderaan usb: Mount USB filesystem succeeded
Jan 3 18:31:51 alderaan fsck: /dev/hda5: clean, 165873/1048576 files,
752163/1048233 blocks
Jan 3 18:31:52 alderaan rc.sysinit: Remounting root filesystem in
read-write mode: succeeded
Jan 3 18:31:52 alderaan rc.sysinit: Activating swap partitions:
succeeded
Jan 3 18:31:54 alderaan rc.sysinit: Finding module dependencies:
succeeded
Jan 3 18:31:54 alderaan : Loading module: scsi_hostadapter
Jan 3 18:31:54 alderaan fsck: /dev/hda1: clean, 14872/783360 files,
311175/783160 blocks
Jan 3 18:31:56 alderaan mount: mount: special device none does not
exist
Jan 3 18:31:56 alderaan mount: mount: special device /dev/sda does not
exist
Jan 3 18:31:56 alderaan rc.sysinit: Mounting local filesystems: failed
Jan 3 18:31:56 alderaan /etc/hotplug/usb.agent: Setup usbmouse hid for
USB product 46d/c00c/610
Jan 3 18:31:56 alderaan rc.sysinit: Mounting loopback filesystems:
succeeded
Jan 3 18:31:57 alderaan /etc/hotplug/usb.agent: ... no modules for USB
product 0/0/0
Jan 3 18:31:57 alderaan last message repeated 2 times
Jan 3 18:31:57 alderaan loadkeys: Loading
/usr/lib/kbd/keymaps/i386/qwerty/it-latin1.kmap.gz
Jan 3 18:31:57 alderaan keytable: Loading keymap: it-latin1 succeeded
Jan 3 18:31:57 alderaan /etc/hotplug/usb.agent: Setup mousedev for USB
product 46d/c00c/610
Jan 3 18:31:57 alderaan loadkeys: Loading
/usr/lib/kbd/keymaps/include/compose.latin.inc.gz
Jan 3 18:31:57 alderaan keytable: Loading compose keys:
compose.latin.inc succeeded
Jan 3 18:31:57 alderaan keytable: succeeded
Jan 3 18:31:58 alderaan rc.sysinit: Enabling swap space: succeeded
Jan 3 18:31:58 alderaan rc.sysinit: Initializing firewire controller
(ohci1394): succeeded
Jan 3 18:32:01 alderaan mandrake_everytime: Building Window Manager
Sessions succeeded
Jan 3 18:32:02 alderaan insmod:
/lib/modules/2.4.22-pre9/kernel/drivers/pcmcia/ds.o: init_module:
Operation not permitted
Jan 3 18:32:02 alderaan modprobe: modprobe: insmod eth1 failed
Jan 3 18:32:02 alderaan mandrake_everytime: Starting netprofile:
succeeded
Jan 3 18:32:02 alderaan init: Entering runlevel: 5
Jan 3 18:32:02 alderaan rc: Starting iptables: succeeded
Jan 3 18:32:02 alderaan INIT: Loading ACPI module battery: failed
Jan 3 18:32:02 alderaan INIT: Loading ACPI module ac: failed
Jan 3 18:32:02 alderaan INIT: Loading ACPI module fan: failed
Jan 3 18:32:02 alderaan INIT: Loading ACPI module thermal: failed
Jan 3 18:32:02 alderaan INIT: Loading ACPI module button: failed
Jan 3 18:32:02 alderaan was11pcmcia: Starting PCMCIA services:
Jan 3 18:32:04 alderaan cardmgr[711]: watching 2 sockets
Jan 3 18:32:04 alderaan was11pcmcia: cardmgr[711]: watching 2 sockets
Jan 3 18:32:04 alderaan cardmgr[712]: starting, version is 3.2.4
Jan 3 18:32:04 alderaan was11pcmcia: done.
Jan 3 18:32:04 alderaan rc: Starting was11pcmcia: succeeded
Jan 3 18:32:04 alderaan cardmgr[712]: executing: 'modprobe hostap'
Jan 3 18:32:04 alderaan network: Setting network parameters: succeeded
Jan 3 18:32:05 alderaan network: Bringing up loopback interface:
succeeded
Jan 3 18:32:05 alderaan ifup: Determining IP information for eth0...
Jan 3 18:32:06 alderaan cardmgr[712]: get dev info on socket 0 failed:
Resource temporarily unavailable <30>Jan 3 18:32:06 cardmgr[712]:
unsupported card in socket 1
Jan 3 18:32:08 alderaan dhclient: DHCPACK from 192.168.0.2
Jan 3 18:32:08 alderaan ifup: done.
Jan 3 18:32:08 alderaan network: Bringing up interface eth0: succeeded
Jan 3 18:32:08 alderaan ifplugd(eth1)[942]: Using interface eth1
Jan 3 18:32:08 alderaan ifplugd(eth1)[942]: Failed to find working plug
detection mode for eth1
Jan 3 18:32:08 alderaan ifplugd(eth1)[942]: Executing
'/etc/ifplugd/ifplugd.action eth1 up'.
Jan 3 18:32:08 alderaan ifplugd(eth1)[942]: client: ho
Jan 3 18:32:08 alderaan ifplugd(eth1)[942]: Program execution failed,
return value is 1.
Jan 3 18:32:08 alderaan ifplugd(eth1)[942]: Exiting.
Jan 3 18:32:08 alderaan network: Bringing up interface eth1: failed
Jan 3 18:32:08 alderaan internet: No connection to start succeeded
Jan 3 18:32:08 alderaan portmap: portmap startup succeeded
........................
Jan 3 18:32:26 alderaan insmod:
/lib/modules/2.4.22-pre9/kernel/drivers/parport/parport_pc.o:
init_module: Device or resource busy
Jan 3 18:32:26 alderaan insmod: Hint: insmod errors can be caused by
incorrect module parameters, including invalid IO or IRQ
parameters. You may find more information in syslog or the output
from dmesg
Jan 3 18:32:26 alderaan modprobe: modprobe: insmod parport_lowlevel
failed
Jan 3 18:32:26 alderaan kernel: lp: driver loaded but no devices found
=====================================================================
On Sat, 2004-01-03 at 16:54, Leonardo Boselli wrote:
> hai provato con hostap ????
>
> Il 3 Jan 2004 alle 16:29 marcoc1@dada.it immise in rete
>
> >
> > Dopo una pluriennale attivita' di ricompilazioni, tesa a far
> > accettare al mio portatile Acer 621xc una scheda wifi normale
> > (ne ho provate molte, tutte prism 2 o 2.5) getto la
> > spugna, e vorrei acquistare/cambiare da un'anima
> > buona una scheda vecchia VECCHIA, prism 1 od
> > orinoco, che funzionano tranquillamente.
Maggiori informazioni sulla lista
flug-tech