[Tech] porte USB su Fedora

[pelfer@tin.it]

Ciao Fabio
questo è il log del dmesg del mio Fedora Core 4. Se trovi 
qualcosa che non va fammelo sapere.
Io intanto farò altre prove 
seguendo i tuoi consigli.
Grazie
Giuliano



Linux version 2.6.11-1.1369
_FC4 (bhcompile@decompose.build.redhat.com) (gcc version 4.0.0 20050525 
(Red Hat 4.0.0-9)) #1 Thu Jun 2 22:55:56 EDT 2005
BIOS-provided 
physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 
(usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 
0000000000100000 - 000000003fff0000 (usable)
 BIOS-e820: 
000000003fff0000 - 000000003fff3000 (ACPI NVS)
 BIOS-e820: 
000000003fff3000 - 0000000040000000 (ACPI data)
 BIOS-e820: 
00000000ffff0000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
Using x86 segment limits to approximate NX 
protection
On node 0 totalpages: 262128
  DMA zone: 4096 pages, LIFO 
batch:1
  Normal zone: 225280 pages, LIFO batch:31
  HighMem zone: 
32752 pages, LIFO batch:15
DMI 2.2 present.
ACPI: RSDP (v000 
761686                                ) @ 0x000f6a70
ACPI: RSDT (v001 
761686 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT 
(v001 761686 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: 
DSDT (v001 761686 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
Allocating PCI resources starting at 
40000000 (gap: 40000000:bfff0000)
Built 1 zonelists
Kernel command 
line: ro root=/dev/hde2
Initializing CPU#0
CPU 0 irqstacks, 
hard=c0457000 soft=c0456000
PID hash table entries: 4096 (order: 12, 
65536 bytes)
Detected 1401.660 MHz processor.
Using pmtmr for high-res 
timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 
131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 
(order: 6, 262144 bytes)
Memory: 1033764k/1048512k available (2518k 
kernel code, 13920k reserved, 690k data, 180k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
Calibrating delay loop... 2777.08 BogoMIPS (lpj=1388544)
Security Framework v1.0.0 initialized
SELinux:  Initializing.
SELinux:  
Starting in permissive mode
selinux_register_security:  Registering 
secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: 
0183f9ff c1c7f9ff 00000000 00000000 00000000 00000000 00000000
CPU: 
After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 
00000000 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D 
cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: 
After all inits, caps: 0183f1ff c1c7f9ff 00000000 00000020 00000000 
00000000 00000000
Intel machine check architecture supported.
Intel 
machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) processor 
stepping 04
Enabling fast FPU save and restore... done.
Checking 'hlt' 
instruction... OK.
ACPI: setting ELCR to 0800 (from 0e20)
checking if 
image is initramfs... it is
Freeing initrd memory: 1079k freed
softlockup thread 0 started up.
NET: Registered protocol family 16
PCI: 
PCI BIOS revision 2.10 entry at 0xfb690, last bus=1
PCI: Using 
configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 
20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt 
routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI 
hardware (bus 00)
Boot video device is 0000:01:05.0
ACPI: PCI Interrupt 
Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 
3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 
5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 
7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 
11 12 14 15) *9
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: 
PnP ACPI init
pnp: PnP ACPI: found 12 devices
usbcore: registered new 
driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ 
routing
PCI: If a device doesn't work, try "pci=routeirq".  If it 
helps, post a report
apm: BIOS version 1.2 Flags 0x07 (Driver version 
1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket 
(disabled)
audit(1155837927.767:1): initialized
highmem bounce pool 
size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas 
dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux:  Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 
42BD35A990375F72
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] 
(supports 2 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux 
agpgart interface v0.101 (c) Dave Jones
agpgart: Detected AMD 761 
chipset
agpgart: AGP aperture is 64M @ 0xf0000000
PNP: PS/2 Controller 
[PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port 
at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 
8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ttyS0 
at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 
16550A
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq 
= 3) is a 16550A
io scheduler noop registered
io scheduler anticipatory 
registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 
33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: 
IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA 
vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
    ide0: 
BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-
DMA at 0x9408-0x940f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE 
interface ide0...
hda: Maxtor 6Y060L0, ATA DISK drive
hdb: LG DVD-ROM 
DRD-8160B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: WAITEC ALADAR/1, ATAPI CD/DVD-ROM 
drive
ide1 at 0x170-0x177,0x376 on irq 15
HPT370A: IDE controller at 
PCI slot 0000:00:13.0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
PCI: setting IRQ 10 as level-triggered
ACPI: PCI Interrupt 0000:00:13.0
[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
HPT370A: chipset 
revision 4
HPT370A: 100% native mode on irq 10
HPT37X: using 33MHz PCI 
clock
    ide2: BM-DMA at 0xc800-0xc807, BIOS settings: hde:DMA, hdf:
DMA
HPT37X: using 33MHz PCI clock
    ide3: BM-DMA at 0xc808-0xc80f, 
BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: 
Maxtor 6Y060L0, ATA DISK drive
hdf: Maxtor 6L080P0, ATA DISK drive
ide2 
at 0xb800-0xb807,0xbc02 on irq 10
Probing IDE interface ide3...
Probing 
IDE interface ide3...
hda: max request size: 128KiB
hda: 117347328 
sectors (60081 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: 
cache flushes supported
 hda:hda: dma_intr: status=0x51 { DriveReady 
SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError 
BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { 
DriveReady SeekComplete Error }
hda: dma_intr: error=0x84 { 
DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: 
dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: 
error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: 
dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode 
was: unknown
hdb: DMA disabled
ide0: reset: success
 hda1
hde: max 
request size: 128KiB
hde: 120103200 sectors (61492 MB) w/2048KiB Cache, 
CHS=65535/16/63, UDMA(100)
hde: cache flushes supported
 hde: hde1 hde2 
hde3 hde4 < hde5 hde6 >
hdf: max request size: 128KiB
hdf: 160086528 
sectors (81964 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hdf: 
cache flushes supported
 hdf: hdf1
hdb: ATAPI 48X DVD-ROM drive, 512kB 
Cache
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 40X CD-ROM CD-
R/RW drive, 8192kB Cache, UDMA(33)
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver 
usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: 
PS/2 mouse device common for all mice
md: md driver 0.90.1 
MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: 
routing cache hash table of 2048 buckets, 64Kbytes
TCP established hash 
table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table 
entries: 65536 (order: 8, 1835008 bytes)
TCP: Hash tables configured 
(established 262144 bind 65536)
Initializing IPsec netlink socket
NET: 
Registered protocol family 1
NET: Registered protocol family 17
ACPI 
wakeup devices:
SLPB PCI0 USB0 USB1
ACPI: (supports S0 S1 S4 S5)
Freeing unused kernel memory: 180k freed
input: AT Translated Set 2 
keyboard on isa0060/serio0
kjournald starting.  Commit interval 5 
seconds
EXT3-fs: mounted filesystem with ordered data mode.
input: 
ImPS/2 Logitech Wheel Mouse on isa0060/serio1
Floppy drive(s): fd0 is 
1.44M
FDC 0 is a post-1991 82077
ACPI: PCI Interrupt 0000:00:09.0[A] -> 
Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
3c59x: Donald Becker and 
others. www.scyld.com/network/vortex.html
0000:00:09.0: 3Com PCI 3c905B 
Cyclone 100baseTx at 0xa000. Vers LK1.1.19
ACPI: PCI Interrupt Link 
[LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: 
PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> 
IRQ 11
gameport: EMU10K1 is pci0000:00:0d.1/gameport0, io 0xb000, speed 
1242kHz
parport_pc: VIA 686A/8231 detected
parport_pc: probing current 
configuration
parport_pc: Current parallel port base: 0x378
parport0: 
PC-style at 0x378, irq 7 [PCSPP,EPP]
parport_pc: VIA parallel port: 
io=0x378, irq=7
shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
ACPI: PCI 
Interrupt 0000:00:0b.2[C] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 
11
ehci_hcd 0000:00:0b.2: EHCI Host Controller
ehci_hcd 0000:00:0b.2: 
new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:0b.2: 
irq 11, io mem 0xfa002000
ehci_hcd 0000:00:0b.2: USB 2.0 initialized, 
EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 
ports detected
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI Interrupt 
0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new 
USB bus registered, assigned bus number 2
uhci_hcd 0000:00:07.2: irq 
10, io base 0x00009800
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports 
detected
ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 
(level, low) -> IRQ 10
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:07.3: irq 10, io base 0x00009c00
hub 3-0:1.0: USB hub 
found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:0b.0[A] 
-> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:0b.0: 
UHCI Host Controller
uhci_hcd 0000:00:0b.0: new USB bus registered, 
assigned bus number 4
uhci_hcd 0000:00:0b.0: irq 10, io base 0x0000a400
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI 
Interrupt Link [LNKA] enabled at IRQ 5
PCI: setting IRQ 5 as level-
triggered
ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LNKA] -> GSI 5 
(level, low) -> IRQ 5
uhci_hcd 0000:00:0b.1: UHCI Host Controller
uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:0b.1: irq 5, io base 0x0000a800
hub 5-0:1.0: USB hub 
found
hub 5-0:1.0: 2 ports detected
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ibm_acpi: ec object not found
md: 
Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-
mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
hda: 
dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: dma_intr: 
error=0x84 { DriveStatusError BadCRC }
ide: failed opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hda: 
dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed opcode 
was: unknown
hda: dma_intr: status=0x51 { DriveReady SeekComplete Error 
}
hda: dma_intr: error=0x84 { DriveStatusError BadCRC }
ide: failed 
opcode was: unknown
hda: dma_intr: status=0x51 { DriveReady 
SeekComplete Error }
hda: dma_intr: error=0x84 { DriveStatusError 
BadCRC }
ide: failed opcode was: unknown
ide0: reset: success
EXT3 FS 
on hde2, internal journal
kjournald starting.  Commit interval 5 
seconds
EXT3 FS on hde1, internal journal
EXT3-fs: mounted filesystem 
with ordered data mode.
EXT2-fs warning: mounting unchecked fs, running 
e2fsck is recommended
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hde6, internal journal
EXT3-fs: mounted filesystem with 
ordered data mode.
Adding 1092380k swap on /dev/hde5.  Priority:-1 
extents:1
ip_tables: (C) 2000-2002 Netfilter core team
lp0: using 
parport0 (interrupt-driven).
lp0: console ready
NET: Registered 
protocol family 10
Disabled Privacy Extensions on device c03e6820(lo)
IPv6 over IPv4 tunneling driver
[drm] Initialized drm 1.0.0 20040925
ACPI: PCI Interrupt 0000:01:05.0[A] -> Link [LNKA] -> GSI 5 (level, 
low) -> IRQ 5
[drm] Initialized mga 3.1.0 20021029 on minor 0:
agpgart: 
Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP 
V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device 
at 0000:01:05.0 into 1x mode
CSLIP: code copyright 1989 Regents of the 
University of California
PPP generic driver version 2.4.2
PPP Deflate 
Compression module registered
ISO 9660 Extensions: Microsoft Joliet 
Level 3
ISOFS: changing to secondary root
application mozilla-bin uses 
obsolete OSS audio interface