[gl-como] modem iterno 56kk

ginoginoli@tiscali.it ginoginoli@tiscali.it
Mar 1 Dic 2009 14:30:36 CET


sono un nuovo utente. Ho la versione 9.10 di ubuntu.
Dovrei attivare una connessione internet 56k. Ho modem interno e capire di che tipo.Ho scaricato scanModem.gz e eseguito le righe di comando come indicato.
Ecco il risultato:
 Only plain text email is forwarded by the  Discuss@Linmodems.org List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.31-14-generic 
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Linux experts in YourCountry 
 can be found through: http://www.linux.org/groups/index.html.
They will know your Country's modem code, which may be essential for dialup service.
Responses from Discuss@Linmodems.org are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at http://www.linmodems.org
--------------------------  System information ----------------------------
CPU=i686,  
Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009
 scanModem update of:  2009_11_14
The dialer utility package WVDIAL does not appear to be installed on your System. 
For Ubuntu Jaunty users, there are at the bottom of http://linmodems.technion.ac.il/packages/:
     wvdial_jaunty_amd64.zip   for x86_64, 64 bit bus systems.
     wvdial_jaunty_i386.zip    for 32 bit systems.
These are about 1 MB in size.  After downloaded and copied into your Linux partition:
$ unzip wv*.zip
Within the new folder:
$ sudo dpkg -i *.deb
will  complete the wvdial installation
Please read Modem/DOCs/wvdial.txt for usage information.
Presently install your Linux Distributions dkms package. It provides for automated driver updates,
following upgrade of your kernel.  For details see http://linux.dell.com/projects.shtml#dkms
 There are no blacklisted modem drivers in /etc/modprobe*  files 
 Potentially useful modem drivers now loaded are:
         snd_hda_intel       
If a USB modem or cellphone is attached and was not detected, please
provide available information in your request to discuss@linmodems.org
For candidate card in slot 03:00.0, firmware information and bootup diagnostics are:
 PCI slot PCI ID  SubsystemID Name
 ---------- --------- --------- --------------
 03:00.0 11c1:044a 144f:1029 Communication controller: Agere Systems F-1156IV WinModem 
 Modem interrupt assignment and sharing: 
 --- Bootup diagnostics for card in PCI slot 03:00.0 ----
[    0.181741] pci 0000:03:00.0: reg 10 32bit mmio: [0xfebffc00-0xfebffcff]
[    0.181748] pci 0000:03:00.0: reg 14 io port: [0xec00-0xec07]
[    0.181754] pci 0000:03:00.0: reg 18 io port: [0xe800-0xe8ff]
[    0.181790] pci 0000:03:00.0: supports D2
[    0.181792] pci 0000:03:00.0: PME# supported from D2 D3hot D3cold
[    0.181796] pci 0000:03:00.0: PME# disabled
 The PCI slot 03:00.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 
For candidate card in slot 00:1b.0, firmware information and bootup diagnostics are:
 PCI slot PCI ID  SubsystemID Name
 ---------- --------- --------- --------------
 00:1b.0 8086:27d8 1462:7529 Audio device: Intel Corporation 82801G 
 Modem interrupt assignment and sharing: 
 16:       1375       1387   IO-APIC-fasteoi   uhci_hcd:usb5, HDA Intel
 --- Bootup diagnostics for card in PCI slot 00:1b.0 ----
[    0.180713] pci 0000:00:1b.0: reg 10 64bit mmio: [0xfe978000-0xfe97bfff]
[    0.180752] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.180755] pci 0000:00:1b.0: PME# disabled
[    8.512785] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.512810] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    8.596598] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input4
 The PCI slot 00:1b.0 of the modem card may be disabled early in 
 a bootup process,  but then enabled later. If modem drivers load 
 but the  modem is not responsive, read DOCs/Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to discuss@linmodems.org
 if help is needed.
 

===== Advanced Linux Sound Architecture (ALSA) diagnostics ===== 
The ALSA packages provide audio support and also drivers for some modems.
ALSA diagnostics are written during bootup to /proc/asound/ folders.
The ALSA verion is 1.0.20
The modem cards detected by "aplay -l"  are: None

The /proc/asound/pcm file reports:
-----------------------
00-00: ALC888 Analog : ALC888 Analog : playback 1 : capture 1
00-01: ALC888 Digital : ALC888 Digital : playback 1
00-02: ALC888 Analog : ALC888 Analog : capture 1
about /proc/asound/cards:
------------------------
 0 [Intel          ]: HDA-Intel - HDA Intel
                      HDA Intel at 0xfe978000 irq 16
 PCI slot 00:1b.0 has a High Definition Audio Card
 The drivers are in the kernel modules tree at:
 /lib/modules/2.6.31-14-generic/kernel/sound/pci/hda/snd-hda-intel.ko
UNEXPECTED HDA diagnostic outcome.
=== Finished firmware and bootup diagnostics, next deducing cogent software. ===
Predictive  diagnostics for card in bus 03:00.0:
 Modem chipset  detected on
NAME="Communication controller: Agere Systems F-1156IV WinModem "
CLASS=0780
PCIDEV=11c1:044a
SUBSYS=144f:1029
IRQ=10
IDENT=Agere.DSP
 For candidate modem in:  03:00.0
   0780 Communication controller: Agere Systems F-1156IV WinModem 
      Primary device ID:  11c1:044a
 Support type needed or chipset: Agere.DSP
 

Writing DOCs/Intel.txt

Predictive  diagnostics for card in bus 00:1b.0:
 Modem chipset not detected on
NAME="Audio device: Intel Corporation 82801G "
CLASS=0403
PCIDEV=8086:27d8
SUBSYS=1462:7529
IRQ=16
HDA=8086:27d8
SOFT=8086:27d8.HDA

 High Definition Audio (HDA) cards MAY host a modem chip in their Subsystem, 
 and many are supported by the ALSA audio+modem driver snd-hda-intel
 A modem was not detected on HDA card 8086:27d8.
 If another modem card is present, then most likely 8086:27d8 does not host a modem.
 If another modem card has not been detected, then possibilities are:
 1) A Conexant modem chip is present on 8086:27d8, as Conexant chips
 are frequently not detectable by ALSA diagnostics
 2) The modem may be of the older non-PCI Controller Chipset (hardware) type.
Try detection with Root permission:
 sudo wvdialconf  /etc/wvdial.conf
 For candidate modem in:  00:1b.0
   0403 Audio device: Intel Corporation 82801G 
      Primary device ID:  8086:27d8
    Subsystem PCI_id  1462:7529 
    Softmodem codec or chipset from diagnostics: 
                               from    Archives: 
                        
      
Support type needed or chipset: 
Support can likely be achieved through two mutually exclusive alternatives:
1) The hsfmodem software for Conexant chipset modems: Read DOCs/Conexant.txt
The following ALSA alternative CANNOT work with Conexant modems.
2) An ALSA modem driver plus slmodemd.  Read DOCs/Smartlink.txt for details, and
to test get the package SLMODEMD.gcc4.4.tar.gz from:
 http://linmodems.technion.ac.il/packages/smartlink/
Writing DOCs/Smartlink.txt
============ end Smartlink section =====================
 Completed candidate modem analyses.
 The base of the UDEV device file system is: /dev/.udev
 Versions adequately match for the compiler installed: 4.4.1
             and the compiler used in kernel assembly: 4.4.1
 The patch utility is needed and is needed for compiling ALSA drivers, and possibly others. 

 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.4
   linuc_headers base folder /lib/modules/2.6.31-14-generic/build
 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are needed. The also required headers of package libc6 are commonly installed by default. 
 Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
 In not included on your install CD, search for them at http://packages.ubuntu.com
 or comparable Repository for other Linux distros.
 When compiling ALSA drivers, the utility "patch" will also be needed.
 

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev
If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:
Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
 -rwsr-xr-- 1 root dip 277352 2009-02-20 18:25 /usr/sbin/pppd
In case of an "error 17" "serial loopback" problem, see:
    http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html
To enable dialout without Root permission do:
 $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
 sudo chmod a+x /usr/sbin/pppd
Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx
In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html
Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.
 Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================
 Checking for modem support lines:
 --------------------------------------
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base.conf:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base.conf:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem.conf:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem.conf:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:
     Within ancient kernel 2.4.n /etc/module.conf files:
--------- end modem support lines --------
 
Qualcuno sa dirmi che significa e come mi devo muovere ora?
E come faccio a sapere se la mia versione è 32 o 64 bi? Grazie

We Love Megapixel ! Fino al 40% di sconto per le stampe formato 13x17/19. 0,12 € cad. per quantità maggiori di 60 foto

-------------- parte successiva --------------
Un allegato HTML è stato rimosso...
URL: <http://lists.linux.it/pipermail/gl-como/attachments/20091201/428c8a87/attachment.htm>


Maggiori informazioni sulla lista gl-como