[gl-como] [HELP!!] Ext3: Bad magic number in super-block

Luca Lanari luca_lanari@libero.it
Gio 6 Ott 2011 17:47:45 CEST


ciao a tutti...

mi si  schiantato stanotte un hdd seagate da 500GB...
dopo qualche gg che smart mi avvisava che stava per succedere...

--------------

questi i messaggi di smart negli ultimi giorni:


The following warning/error was logged by the smartd daemon:

Device: /dev/sdb, ATA error count increased from 1929 to 2223

...
e altri simili

--------------

il mount non me lo fa pi (lo facevo per UUID e ora mi dice che non
esiste...)

se faccio:

sudo tune2fs -l /dev/sdb

mi dice:

tune2fs 1.41.11 (14-Mar-2010)
tune2fs: Bad magic number in super-block durante l'apertura di /dev/sdb
Impossibile trovare un valido superblocco per il filesystem.

ora sto aspettando (da 5 ore) badblock -s

avete qualche idea su come provare a recuperare qualcosa?
(dopo che badblock finisce?!?...  al 3.5%... no comment....) 

ho paura che si possa essere fottuta l'elettronica ( acceso da 4 anni,
a parte qualche off di qualche ora o gg al max...)
anche se gparted me lo vede (ma non riconosce alcun filesystem)

----------

da smart:

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.11
Device Model:     ST3500820AS
Serial Number:    9QM3847J
Firmware Version: SD81
User Capacity:    500,107,862,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Thu Oct  6 17:36:15 2011 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

----------------------

da syslog:

Oct  6 17:40:01 localhost kernel: [33348.976042] ata2: EH in SWNCQ
mode,QC:qc_active 0x1 sactive 0x1
Oct  6 17:40:01 localhost kernel: [33348.976047] ata2: SWNCQ:qc_active
0x1 defer_bits 0x0 last_issue_tag 0x0
Oct  6 17:40:01 localhost kernel: [33348.976049]   dhfis 0x1 dmafis 0x1
sdbfis 0x0
Oct  6 17:40:01 localhost kernel: [33348.976052] ata2: ATA_REG 0x41
ERR_REG 0x40
Oct  6 17:40:01 localhost kernel: [33348.976054] ata2: tag : dhfis
dmafis sdbfis sacitve
Oct  6 17:40:01 localhost kernel: [33348.976057] ata2: tag 0x0: 1 1 0
1  
Oct  6 17:40:01 localhost kernel: [33348.976066] ata2.00: exception
Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
Oct  6 17:40:01 localhost kernel: [33348.976068] ata2.00: Ata error.
fis:0x21
Oct  6 17:40:01 localhost kernel: [33348.976072] ata2.00: failed
command: READ FPDMA QUEUED
Oct  6 17:40:01 localhost kernel: [33348.976079] ata2.00: cmd
60/08:00:58:13:c7/00:00:01:00:00/40 tag 0 ncq 4096 in
Oct  6 17:40:01 localhost kernel: [33348.976081]          res
41/40:00:58:13:c7/40:00:01:00:00/40 Emask 0x9 (media error)
Oct  6 17:40:01 localhost kernel: [33348.976084] ata2.00: status: { DRDY
ERR }
Oct  6 17:40:01 localhost kernel: [33348.976086] ata2.00: error: { UNC }
Oct  6 17:40:01 localhost kernel: [33348.976091] ata2: hard resetting
link
Oct  6 17:40:01 localhost kernel: [33348.976093] ata2: nv: skipping
hardreset on occupied port
Oct  6 17:40:02 localhost kernel: [33349.462534] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct  6 17:40:02 localhost kernel: [33349.520525] ata2.00: configured for
UDMA/133
Oct  6 17:40:02 localhost kernel: [33349.520541] sd 1:0:0:0: [sdb]
Unhandled sense code
Oct  6 17:40:02 localhost kernel: [33349.520543] sd 1:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct  6 17:40:02 localhost kernel: [33349.520547] sd 1:0:0:0: [sdb] Sense
Key : Medium Error [current] [descriptor]
Oct  6 17:40:02 localhost kernel: [33349.520552] Descriptor sense data
with sense descriptors (in hex):
Oct  6 17:40:02 localhost kernel: [33349.520554]         72 03 11 04 00
00 00 0c 00 0a 80 00 00 00 00 00 
Oct  6 17:40:02 localhost kernel: [33349.520562]         01 c7 13 58 
Oct  6 17:40:02 localhost kernel: [33349.520566] sd 1:0:0:0: [sdb] Add.
Sense: Unrecovered read error - auto reallocate failed
Oct  6 17:40:02 localhost kernel: [33349.520570] sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 01 c7 13 58 00 00 08 00
Oct  6 17:40:02 localhost kernel: [33349.520578] end_request: I/O error,
dev sdb, sector 29823832
Oct  6 17:40:02 localhost kernel: [33349.520583] Buffer I/O error on
device sdb, logical block 3727979
Oct  6 17:40:02 localhost kernel: [33349.520603] ata2: EH complete
Oct  6 17:40:06 localhost kernel: [33353.712403] ata2: EH in SWNCQ
mode,QC:qc_active 0x1 sactive 0x1
Oct  6 17:40:06 localhost kernel: [33353.712409] ata2: SWNCQ:qc_active
0x1 defer_bits 0x0 last_issue_tag 0x0
Oct  6 17:40:06 localhost kernel: [33353.712410]   dhfis 0x1 dmafis 0x1
sdbfis 0x0
Oct  6 17:40:06 localhost kernel: [33353.712414] ata2: ATA_REG 0x41
ERR_REG 0x40
Oct  6 17:40:06 localhost kernel: [33353.712416] ata2: tag : dhfis
dmafis sdbfis sacitve
Oct  6 17:40:06 localhost kernel: [33353.712418] ata2: tag 0x0: 1 1 0
1  
Oct  6 17:40:06 localhost kernel: [33353.712428] ata2.00: exception
Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
Oct  6 17:40:06 localhost kernel: [33353.712431] ata2.00: Ata error.
fis:0x21
Oct  6 17:40:06 localhost kernel: [33353.712434] ata2.00: failed
command: READ FPDMA QUEUED
Oct  6 17:40:06 localhost kernel: [33353.712441] ata2.00: cmd
60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
Oct  6 17:40:06 localhost kernel: [33353.712443]          res
41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
Oct  6 17:40:06 localhost kernel: [33353.712446] ata2.00: status: { DRDY
ERR }
Oct  6 17:40:06 localhost kernel: [33353.712448] ata2.00: error: { UNC }
Oct  6 17:40:06 localhost kernel: [33353.712453] ata2: hard resetting
link
Oct  6 17:40:06 localhost kernel: [33353.712455] ata2: nv: skipping
hardreset on occupied port
Oct  6 17:40:07 localhost kernel: [33354.200036] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct  6 17:40:07 localhost kernel: [33354.263014] ata2.00: configured for
UDMA/133
Oct  6 17:40:07 localhost kernel: [33354.263026] ata2: EH complete
Oct  6 17:40:09 localhost kernel: [33357.080542] ata2: EH in SWNCQ
mode,QC:qc_active 0x1 sactive 0x1
Oct  6 17:40:09 localhost kernel: [33357.080548] ata2: SWNCQ:qc_active
0x1 defer_bits 0x0 last_issue_tag 0x0
Oct  6 17:40:09 localhost kernel: [33357.080549]   dhfis 0x1 dmafis 0x1
sdbfis 0x0
Oct  6 17:40:09 localhost kernel: [33357.080552] ata2: ATA_REG 0x41
ERR_REG 0x40
Oct  6 17:40:09 localhost kernel: [33357.080555] ata2: tag : dhfis
dmafis sdbfis sacitve
Oct  6 17:40:09 localhost kernel: [33357.080557] ata2: tag 0x0: 1 1 0 1
Oct  6 17:40:09 localhost kernel: [33357.080566] ata2.00: exception
Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
Oct  6 17:40:09 localhost kernel: [33357.080569] ata2.00: Ata error.
fis:0x21
Oct  6 17:40:09 localhost kernel: [33357.080573] ata2.00: failed
command: READ FPDMA QUEUED
Oct  6 17:40:09 localhost kernel: [33357.080580] ata2.00: cmd
60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
Oct  6 17:40:09 localhost kernel: [33357.080581]          res
41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
Oct  6 17:40:09 localhost kernel: [33357.080584] ata2.00: status: { DRDY
ERR }
Oct  6 17:40:09 localhost kernel: [33357.080587] ata2.00: error: { UNC }
Oct  6 17:40:09 localhost kernel: [33357.080591] ata2: hard resetting
link
Oct  6 17:40:09 localhost kernel: [33357.080594] ata2: nv: skipping
hardreset on occupied port
Oct  6 17:40:10 localhost kernel: [33357.560035] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct  6 17:40:10 localhost kernel: [33357.620515] ata2.00: configured for
UDMA/133
Oct  6 17:40:10 localhost kernel: [33357.620530] ata2: EH complete
Oct  6 17:40:13 localhost kernel: [33360.403845] ata2: EH in SWNCQ
mode,QC:qc_active 0x1 sactive 0x1
Oct  6 17:40:13 localhost kernel: [33360.403851] ata2: SWNCQ:qc_active
0x1 defer_bits 0x0 last_issue_tag 0x0
Oct  6 17:40:13 localhost kernel: [33360.403852]   dhfis 0x1 dmafis 0x1
sdbfis 0x0
Oct  6 17:40:13 localhost kernel: [33360.403855] ata2: ATA_REG 0x41
ERR_REG 0x40
Oct  6 17:40:13 localhost kernel: [33360.403857] ata2: tag : dhfis
dmafis sdbfis sacitve
Oct  6 17:40:13 localhost kernel: [33360.403860] ata2: tag 0x0: 1 1 0
1  
Oct  6 17:40:13 localhost kernel: [33360.403870] ata2.00: exception
Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
Oct  6 17:40:13 localhost kernel: [33360.403873] ata2.00: Ata error.
fis:0x21
Oct  6 17:40:13 localhost kernel: [33360.403876] ata2.00: failed
command: READ FPDMA QUEUED
Oct  6 17:40:13 localhost kernel: [33360.403883] ata2.00: cmd
60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
Oct  6 17:40:13 localhost kernel: [33360.403885]          res
41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
Oct  6 17:40:13 localhost kernel: [33360.403888] ata2.00: status: { DRDY
ERR }
Oct  6 17:40:13 localhost kernel: [33360.403890] ata2.00: error: { UNC }
Oct  6 17:40:13 localhost kernel: [33360.403895] ata2: hard resetting
link
Oct  6 17:40:13 localhost kernel: [33360.403897] ata2: nv: skipping
hardreset on occupied port
Oct  6 17:40:13 localhost kernel: [33360.892533] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct  6 17:40:13 localhost kernel: [33360.950531] ata2.00: configured for
UDMA/133
Oct  6 17:40:13 localhost kernel: [33360.950548] ata2: EH complete
Oct  6 17:40:16 localhost kernel: [33363.743900] ata2: EH in SWNCQ
mode,QC:qc_active 0x1 sactive 0x1
Oct  6 17:40:16 localhost kernel: [33363.743906] ata2: SWNCQ:qc_active
0x1 defer_bits 0x0 last_issue_tag 0x0
Oct  6 17:40:16 localhost kernel: [33363.743907]   dhfis 0x1 dmafis 0x1
sdbfis 0x0
Oct  6 17:40:16 localhost kernel: [33363.743910] ata2: ATA_REG 0x41
ERR_REG 0x40
Oct  6 17:40:16 localhost kernel: [33363.743912] ata2: tag : dhfis
dmafis sdbfis sacitve
Oct  6 17:40:16 localhost kernel: [33363.743915] ata2: tag 0x0: 1 1 0
1  
Oct  6 17:40:16 localhost kernel: [33363.743925] ata2.00: exception
Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
Oct  6 17:40:16 localhost kernel: [33363.743928] ata2.00: Ata error.
fis:0x21
Oct  6 17:40:16 localhost kernel: [33363.743931] ata2.00: failed
command: READ FPDMA QUEUED
Oct  6 17:40:16 localhost kernel: [33363.743938] ata2.00: cmd
60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
Oct  6 17:40:16 localhost kernel: [33363.743940]          res
41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
Oct  6 17:40:16 localhost kernel: [33363.743943] ata2.00: status: { DRDY
ERR }
Oct  6 17:40:16 localhost kernel: [33363.743945] ata2.00: error: { UNC }
Oct  6 17:40:16 localhost kernel: [33363.743950] ata2: hard resetting
link
Oct  6 17:40:16 localhost kernel: [33363.743952] ata2: nv: skipping
hardreset on occupied port
Oct  6 17:40:17 localhost kernel: [33364.232542] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct  6 17:40:17 localhost kernel: [33364.293112] ata2.00: configured for
UDMA/133
Oct  6 17:40:17 localhost kernel: [33364.293126] ata2: EH complete
Oct  6 17:40:19 localhost kernel: [33367.108957] ata2: EH in SWNCQ
mode,QC:qc_active 0x1 sactive 0x1
Oct  6 17:40:19 localhost kernel: [33367.108963] ata2: SWNCQ:qc_active
0x1 defer_bits 0x0 last_issue_tag 0x0
Oct  6 17:40:19 localhost kernel: [33367.108965]   dhfis 0x1 dmafis 0x1
sdbfis 0x0
Oct  6 17:40:19 localhost kernel: [33367.108968] ata2: ATA_REG 0x41
ERR_REG 0x40
Oct  6 17:40:19 localhost kernel: [33367.108970] ata2: tag : dhfis
dmafis sdbfis sacitve
Oct  6 17:40:19 localhost kernel: [33367.108973] ata2: tag 0x0: 1 1 0
1  
Oct  6 17:40:19 localhost kernel: [33367.108983] ata2.00: exception
Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
Oct  6 17:40:19 localhost kernel: [33367.108986] ata2.00: Ata error.
fis:0x21
Oct  6 17:40:19 localhost kernel: [33367.108990] ata2.00: failed
command: READ FPDMA QUEUED
Oct  6 17:40:19 localhost kernel: [33367.108997] ata2.00: cmd
60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
Oct  6 17:40:19 localhost kernel: [33367.108998]          res
41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
Oct  6 17:40:19 localhost kernel: [33367.109001] ata2.00: status: { DRDY
ERR }
Oct  6 17:40:19 localhost kernel: [33367.109004] ata2.00: error: { UNC }
Oct  6 17:40:19 localhost kernel: [33367.109009] ata2: hard resetting
link
Oct  6 17:40:19 localhost kernel: [33367.109012] ata2: nv: skipping
hardreset on occupied port
Oct  6 17:40:20 localhost kernel: [33367.590047] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct  6 17:40:20 localhost kernel: [33367.653016] ata2.00: configured for
UDMA/133
Oct  6 17:40:20 localhost kernel: [33367.653033] ata2: EH complete
Oct  6 17:40:23 localhost kernel: [33370.457326] ata2: EH in SWNCQ
mode,QC:qc_active 0x1 sactive 0x1
Oct  6 17:40:23 localhost kernel: [33370.457331] ata2: SWNCQ:qc_active
0x1 defer_bits 0x0 last_issue_tag 0x0
Oct  6 17:40:23 localhost kernel: [33370.457333]   dhfis 0x1 dmafis 0x1
sdbfis 0x0
Oct  6 17:40:23 localhost kernel: [33370.457336] ata2: ATA_REG 0x41
ERR_REG 0x40
Oct  6 17:40:23 localhost kernel: [33370.457338] ata2: tag : dhfis
dmafis sdbfis sacitve
Oct  6 17:40:23 localhost kernel: [33370.457341] ata2: tag 0x0: 1 1 0
1  
Oct  6 17:40:23 localhost kernel: [33370.457350] ata2.00: exception
Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
Oct  6 17:40:23 localhost kernel: [33370.457353] ata2.00: Ata error.
fis:0x21
Oct  6 17:40:23 localhost kernel: [33370.457356] ata2.00: failed
command: READ FPDMA QUEUED
Oct  6 17:40:23 localhost kernel: [33370.457363] ata2.00: cmd
60/80:00:40:08:cb/00:00:01:00:00/40 tag 0 ncq 65536 in
Oct  6 17:40:23 localhost kernel: [33370.457365]          res
41/40:00:40:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
Oct  6 17:40:23 localhost kernel: [33370.457368] ata2.00: status: { DRDY
ERR }
Oct  6 17:40:23 localhost kernel: [33370.457370] ata2.00: error: { UNC }
Oct  6 17:40:23 localhost kernel: [33370.457375] ata2: hard resetting
link
Oct  6 17:40:23 localhost kernel: [33370.457377] ata2: nv: skipping
hardreset on occupied port
Oct  6 17:40:23 localhost kernel: [33370.940070] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct  6 17:40:23 localhost kernel: [33371.000519] ata2.00: configured for
UDMA/133
Oct  6 17:40:23 localhost kernel: [33371.000536] sd 1:0:0:0: [sdb]
Unhandled sense code
Oct  6 17:40:23 localhost kernel: [33371.000538] sd 1:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct  6 17:40:23 localhost kernel: [33371.000542] sd 1:0:0:0: [sdb] Sense
Key : Medium Error [current] [descriptor]
Oct  6 17:40:23 localhost kernel: [33371.000546] Descriptor sense data
with sense descriptors (in hex):
Oct  6 17:40:23 localhost kernel: [33371.000549]         72 03 11 04 00
00 00 0c 00 0a 80 00 00 00 00 00 
Oct  6 17:40:23 localhost kernel: [33371.000557]         01 cb 08 40 
Oct  6 17:40:23 localhost kernel: [33371.000560] sd 1:0:0:0: [sdb] Add.
Sense: Unrecovered read error - auto reallocate failed
Oct  6 17:40:23 localhost kernel: [33371.000565] sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 01 cb 08 40 00 00 80 00
Oct  6 17:40:23 localhost kernel: [33371.000573] end_request: I/O error,
dev sdb, sector 30083136
Oct  6 17:40:23 localhost kernel: [33371.000592] ata2: EH complete
Oct  6 17:40:26 localhost kernel: [33373.822305] ata2: EH in SWNCQ
mode,QC:qc_active 0x1 sactive 0x1
Oct  6 17:40:26 localhost kernel: [33373.822311] ata2: SWNCQ:qc_active
0x1 defer_bits 0x0 last_issue_tag 0x0
Oct  6 17:40:26 localhost kernel: [33373.822313]   dhfis 0x1 dmafis 0x1
sdbfis 0x0
Oct  6 17:40:26 localhost kernel: [33373.822316] ata2: ATA_REG 0x41
ERR_REG 0x40
Oct  6 17:40:26 localhost kernel: [33373.822318] ata2: tag : dhfis
dmafis sdbfis sacitve
Oct  6 17:40:26 localhost kernel: [33373.822321] ata2: tag 0x0: 1 1 0
1  
Oct  6 17:40:23 localhost kernel: [33370.457370] ata2.00: error: { UNC }
Oct  6 17:40:23 localhost kernel: [33370.457375] ata2: hard resetting
link
Oct  6 17:40:23 localhost kernel: [33370.457377] ata2: nv: skipping
hardreset on occupied port
Oct  6 17:40:23 localhost kernel: [33370.940070] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct  6 17:40:23 localhost kernel: [33371.000519] ata2.00: configured for
UDMA/133
Oct  6 17:40:23 localhost kernel: [33371.000536] sd 1:0:0:0: [sdb]
Unhandled sense code
Oct  6 17:40:23 localhost kernel: [33371.000538] sd 1:0:0:0: [sdb]
Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Oct  6 17:40:23 localhost kernel: [33371.000542] sd 1:0:0:0: [sdb] Sense
Key : Medium Error [current] [descriptor]
Oct  6 17:40:23 localhost kernel: [33371.000546] Descriptor sense data
with sense descriptors (in hex):
Oct  6 17:40:23 localhost kernel: [33371.000549]         72 03 11 04 00
00 00 0c 00 0a 80 00 00 00 00 00 
Oct  6 17:40:23 localhost kernel: [33371.000557]         01 cb 08 40 
Oct  6 17:40:23 localhost kernel: [33371.000560] sd 1:0:0:0: [sdb] Add.
Sense: Unrecovered read error - auto reallocate failed
Oct  6 17:40:23 localhost kernel: [33371.000565] sd 1:0:0:0: [sdb] CDB:
Read(10): 28 00 01 cb 08 40 00 00 80 00
Oct  6 17:40:23 localhost kernel: [33371.000573] end_request: I/O error,
dev sdb, sector 30083136
Oct  6 17:40:23 localhost kernel: [33371.000592] ata2: EH complete
Oct  6 17:40:26 localhost kernel: [33373.822305] ata2: EH in SWNCQ
mode,QC:qc_active 0x1 sactive 0x1
Oct  6 17:40:26 localhost kernel: [33373.822311] ata2: SWNCQ:qc_active
0x1 defer_bits 0x0 last_issue_tag 0x0
Oct  6 17:40:26 localhost kernel: [33373.822313]   dhfis 0x1 dmafis 0x1
sdbfis 0x0
Oct  6 17:40:26 localhost kernel: [33373.822316] ata2: ATA_REG 0x41
ERR_REG 0x40
Oct  6 17:40:26 localhost kernel: [33373.822318] ata2: tag : dhfis
dmafis sdbfis sacitve
Oct  6 17:40:26 localhost kernel: [33373.822321] ata2: tag 0x0: 1 1 0
1  
Oct  6 17:40:26 localhost kernel: [33373.822330] ata2.00: exception
Emask 0x1 SAct 0x1 SErr 0x0 action 0x6 frozen
Oct  6 17:40:26 localhost kernel: [33373.822333] ata2.00: Ata error.
fis:0x21
Oct  6 17:40:26 localhost kernel: [33373.822336] ata2.00: failed
command: READ FPDMA QUEUED
Oct  6 17:40:26 localhost kernel: [33373.822343] ata2.00: cmd
60/08:00:60:08:cb/00:00:01:00:00/40 tag 0 ncq 4096 in
Oct  6 17:40:26 localhost kernel: [33373.822345]          res
41/40:00:60:08:cb/40:00:01:00:00/40 Emask 0x9 (media error)
Oct  6 17:40:26 localhost kernel: [33373.822348] ata2.00: status: { DRDY
ERR }
Oct  6 17:40:26 localhost kernel: [33373.822350] ata2.00: error: { UNC }
Oct  6 17:40:26 localhost kernel: [33373.822355] ata2: hard resetting
link
Oct  6 17:40:26 localhost kernel: [33373.822358] ata2: nv: skipping
hardreset on occupied port
Oct  6 17:40:27 localhost kernel: [33374.312535] ata2: SATA link up 3.0
Gbps (SStatus 123 SControl 300)
Oct  6 17:40:27 localhost kernel: [33374.380516] ata2.00: configured for
UDMA/133
Oct  6 17:40:27 localhost kernel: [33374.380531] ata2: EH complete

-------------- parte successiva --------------
Un allegato HTML  stato rimosso...
URL: <http://lists.linux.it/pipermail/gl-como/attachments/20111006/8565bd2e/attachment-0001.htm>


Maggiori informazioni sulla lista gl-como