glug: devo iniziare a preoccuparmi???

[Filippo Santovito]

vi prego ditemi di no....
questo è quanto dice dmesg dopo che l'hd ha iniziato a fare rumori strani...

hda: dma_timer_expiry: dma status == 0x61
hda: error waiting for DMA
hda: dma timeout retry: status=0xd0 { Busy }

hda: DMA disabled
hdb: DMA disabled
ide0: reset timed-out, status=0x80
hda: status timeout: status=0x80 { Busy }

hda: drive not ready for command
ide0: reset: success
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 8x/50x cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.12
sr1: scsi3-mmc drive: 4x/32x writer cd/rw xa/form2 cdda tray
SCSI cdrom error : host 0 channel 0 id 1 lun 0 return code = 28000000
ILI Current sd0b:01: sns = 70 25
ASC=64 ASCQ= 0
Raw sense data:0x70 0x00 0x25 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 
0x64 0x00 0x00 0x00 0x00 0x00
 I/O error: dev 0b:01, sector 0
SCSI cdrom error : host 0 channel 0 id 1 lun 0 return code = 28000000
ILI Current sd0b:01: sns = 70 25
ASC=64 ASCQ= 0
Raw sense data:0x70 0x00 0x25 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 
0x64 0x00 0x00 0x00 0x00 0x00
 I/O error: dev 0b:01, sector 0
FAT: unable to read boot sector
SCSI cdrom error : host 0 channel 0 id 1 lun 0 return code = 28000000
ILI Current sd0b:01: sns = 70 25
ASC=64 ASCQ= 0
Raw sense data:0x70 0x00 0x25 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00 
0x64 0x00 0x00 0x00 0x00 0x00
 I/O error: dev 0b:01, sector 0
FAT: unable to read boot sector
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi CD-ROM sr1 at scsi0, channel 0, id 1, lun 0
sr0: scsi3-mmc drive: 8x/50x cd/rw xa/form2 cdda tray
sr1: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
hda: dma_timer_expiry: dma status == 0x20
hda: timeout waiting for DMA
hda: timeout waiting for DMA
hda: (__ide_dma_test_irq) called while not waiting
hda: status timeout: status=0xd0 { Busy }

hda: drive not ready for command
ide0: reset timed-out, status=0x80
hda: status timeout: status=0x80 { Busy }

hda: drive not ready for command
ide0: reset: success