[glux] dmesg..se avete voglia di darmi una mano??? CUTT..

[alabama3@tin.it]

Linux version 2.6.8 (root@linuzz0) (gcc version 3.3.5 (Debian 1:3.3.5-1))
#6 Mon Oct 18 15:26:52 CEST 2004
PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
PCI: IRQ 0 for device 0000:00:0f.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 3 for device 0000:00:0f.1
IRQ routing conflict for 0000:00:10.0, have irq 6, want irq 3
IRQ routing conflict for 0000:00:10.1, have irq 6, want irq 3
IRQ routing conflict for 0000:00:12.0, have irq 6, want irq 3
spurious 8259A interrupt: IRQ7.

via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
PCI: IRQ 6 for device 0000:00:12.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 3 for device 0000:00:12.0
PCI: Sharing IRQ 3 with 0000:00:0f.1
IRQ routing conflict for 0000:00:10.0, have irq 6, want irq 3
IRQ routing conflict for 0000:00:10.1, have irq 6, want irq 3
IRQ routing conflict for 0000:00:12.0, have irq 6, want irq 3
eth0: VIA Rhine II at 0xf2000000, 00:0e:a6:bb:d3:cb, IRQ 6.
eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 0080

PCI: Found IRQ 3 for device 0000:00:0e.0
eth1: RealTek RTL8139 at 0xd400, 00:10:a7:13:76:bb, IRQ 3
eth1:  Identified 8139 chip type 'RTL-8100B/8139D'
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:0f.1
PCI: Found IRQ 3 for device 0000:00:0f.1
IRQ routing conflict for 0000:00:10.0, have irq 6, want irq 3
IRQ routing conflict for 0000:00:10.1, have irq 6, want irq 3
IRQ routing conflict for 0000:00:12.0, have irq 6, want irq 3

sata_via version 0.20
PCI: Found IRQ 4 for device 0000:00:0f.0
IRQ routing conflict for 0000:00:0f.0, have irq 9, want irq 4
IRQ routing conflict for 0000:00:10.2, have irq 9, want irq 4
IRQ routing conflict for 0000:00:10.3, have irq 9, want irq 4
sata_via(0000:00:0f.0): routed to hard irq line 9
ata1: SATA max UDMA/133 cmd 0xD000 ctl 0xB802 bmdma 0xA800 irq 9
ata2: SATA max UDMA/133 cmd 0xB400 ctl 0xB002 bmdma 0xA808 irq 9

ata2: no device found (phy stat 00000000)

USB Universal Host Controller Interface driver v2.2
PCI: IRQ 6 for device 0000:00:10.0 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 3 for device 0000:00:10.0
PCI: Sharing IRQ 3 with 0000:00:0f.1
IRQ routing conflict for 0000:00:10.0, have irq 6, want irq 3
IRQ routing conflict for 0000:00:10.1, have irq 6, want irq 3
IRQ routing conflict for 0000:00:12.0, have irq 6, want irq 3
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 6, io base 00009800
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PCI: IRQ 6 for device 0000:00:10.1 doesn't match PIRQ mask - try pci=usepirqmask
PCI: Found IRQ 3 for device 0000:00:10.1
PCI: Sharing IRQ 3 with 0000:00:0f.1
IRQ routing conflict for 0000:00:10.0, have irq 6, want irq 3
IRQ routing conflict for 0000:00:10.1, have irq 6, want irq 3
IRQ routing conflict for 0000:00:12.0, have irq 6, want irq 3
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
(#2)
uhci_hcd 0000:00:10.1: irq 6, io base 00009400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
PCI: Found IRQ 4 for device 0000:00:10.2
IRQ routing conflict for 0000:00:0f.0, have irq 9, want irq 4
IRQ routing conflict for 0000:00:10.2, have irq 9, want irq 4
IRQ routing conflict for 0000:00:10.3, have irq 9, want irq 4

gigi credo di aver taliato al massimo...
quasi tutti quegli IRQ routing me li da nn appena compilo il kernel con
moduli  USB
e pur credo di mettergli solovle cose essenziali per far funzionare l' USB,
per
nn sbagliare nemmeno la stampate cconfiguro!!
grazie
fabio