[ImoLUG] Debian Sarge, un'inghippo

Luca Golinelli info@lucagolinelli.com
Mar 2 Ago 2005 19:28:37 CEST


Che kernel hai? 2.4 o 2.6?

Daniele ha scritto:
> ciao a tutti,
> ho un problkema con Debian Sarge apena installato. Ho bisogno di 
> installare il modem ADSL "Speedtouch 330" e tutto ha proceduto bene fino 
> a quando non lo faccio partire dove mi da un'errore. Visto che l'errore 
> riporta un mancato caricamento di EHCI lo vedo collegato ad un'altra 
> probelmatica in fase di caricamento del sistema operativo dove 2 volte 
> su 3 il computer si pianta letteralmente alla voce USB.
> Qualcuno ha qualche idea  dove mettere le mani ? Ho girato questa 
> richiesta anche al RavennaLug
> 
> 
> Comunque..... con il comando speedtouch-start mi appare questo errore :
> zampo1:/# speedtouch-start
> Starting ADSL connection...
> Loading EHCI support... KO
> 
> Ecco il risultato di lsmod (ho volutamente tolto qualche cosa per non 
> appesantire la lettura, ma se serve posto tutto)
> Module                  Size  Used by
> appletalk              36340  20
> speedtch               15152  0
> usblp                  13056  0
> usb_storage            68800  1
> pci_hotplug            34352  0
> via_agp                 9088  1
> agpgart                34536  2 via_agp
> ehci_hcd               31364  0
> eth1394                21768  0
> uhci_hcd               32784  0
> usbcore               118308  7 
> speedtch,usblp,usb_storage,ehci_hcd,uhci_hcd
> via_rhine              21640  0
> mii                     5184  1 via_rhine
> via_ircc               26448  0
> irda                  195712  1 via_ircc
> crc_ccitt               2176  1 irda
> ohci1394               35588  0
> scsi_mod              124812  5 usb_storage,sr_mod,sbp2,sd_mod,libata
> unix                   28660  401
> 
> Anche lspci -v
> zampo1:/# lspci -v
> 0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8375 [KM266/KL266] 
> Host Bridge
>         Subsystem: VIA Technologies, Inc. VT8375 [KM266/KL266] Host Bridge
>         Flags: bus master, 66MHz, medium devsel, latency 8
>         Memory at e0000000 (32-bit, prefetchable) [size=128M]
>         Capabilities: [a0] AGP version 2.0
>         Capabilities: [c0] Power Management version 2
> 
> 0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 
> AGP] (prog-if 00 [Normal decode])
>         Flags: bus master, 66MHz, medium devsel, latency 0
>         Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>         I/O behind bridge: 00009000-00009fff
>         Memory behind bridge: e8000000-e9ffffff
>         Prefetchable memory behind bridge: d0000000-dfffffff
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:08.0 Multimedia audio controller: Creative Labs: Unknown device 
> 0008
>         Subsystem: Creative Labs: Unknown device 1001
>         Flags: bus master, medium devsel, latency 32, IRQ 169
>         I/O ports at a000 [size=64]
>         Capabilities: [dc] Power Management version 2
> 
> 0000:00:09.0 Communication controller: Lucent Microelectronics V.92 56K 
> WinModem (rev 02)
>         Subsystem: Lucent Microelectronics: Unknown device 044c
>         Flags: bus master, medium devsel, latency 32, IRQ 177
>         Memory at ea000000 (32-bit, non-prefetchable) [size=256]
>         I/O ports at a400 [size=8]
>         I/O ports at a800 [size=256]
>         Capabilities: [f8] Power Management version 2
> 
> 0000:00:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host 
> Controller (rev 46) (prog-if 10 [OHCI])
>         Subsystem: Unknown device e217:0140
>         Flags: bus master, medium devsel, latency 32, IRQ 185
>         Memory at ea001000 (32-bit, non-prefetchable) [size=2K]
>         I/O ports at ac00 [size=128]
>         Capabilities: [50] Power Management version 2
> 
> 0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
> 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>         Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>         Flags: bus master, medium devsel, latency 32, IRQ 193
>         I/O ports at b000 [size=32]
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
> 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>         Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>         Flags: bus master, medium devsel, latency 32, IRQ 193
>         I/O ports at b400 [size=32]
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 
> 1.1 Controller (rev 80) (prog-if 00 [UHCI])
>         Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
>         Flags: bus master, medium devsel, latency 32, IRQ 193
>         I/O ports at b800 [size=32]
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) 
> (prog-if 20 [EHCI])
>         Subsystem: VIA Technologies, Inc. USB 2.0
>         Flags: bus master, medium devsel, latency 32, IRQ 193
>         Memory at ea002000 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [80] Power Management version 2
> 
> 0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
>         Subsystem: VIA Technologies, Inc. VT8235 ISA Bridge
>         Flags: bus master, stepping, medium devsel, latency 0
>         Capabilities: [c0] Power Management version 2
> 
> 0000:00:11.1 IDE interface: VIA Technologies, Inc. 
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) 
> (prog-if 8a [Master SecP PriP])
>         Subsystem: Biostar Microtech Int'l Corp: Unknown device 3204
>         Flags: bus master, medium devsel, latency 32, IRQ 201
>         I/O ports at bc00 [size=16]
>         Capabilities: [c0] Power Management version 2
> 
> 0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. 
> VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
>         Subsystem: Biostar Microtech Int'l Corp: Unknown device f614
>         Flags: medium devsel, IRQ 209
>         I/O ports at c000 [size=256]
>         Capabilities: [c0] Power Management version 2
> 
> 0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 
> [Rhine-II] (rev 74)
>         Subsystem: Biostar Microtech Int'l Corp: Unknown device 2200
>         Flags: bus master, medium devsel, latency 32, IRQ 217
>         I/O ports at c800 [size=256]
>         Memory at ea003000 (32-bit, non-prefetchable) [size=256]
>         Capabilities: [40] Power Management version 2
> 
> 0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 
> QM [Radeon 9100] (prog-if 00 [VGA])
>         Subsystem: PC Partner Limited: Unknown device 7149
>         Flags: bus master, stepping, 66MHz, medium devsel, latency 32, 
> IRQ 169
>         Memory at d0000000 (32-bit, prefetchable) [size=256M]
>         I/O ports at 9000 [size=256]
>         Memory at e9000000 (32-bit, non-prefetchable) [size=64K]
>         Capabilities: [58] AGP version 2.0
>         Capabilities: [50] Power Management version 2
> 
> inoltre vi aggiungo anche parte del testo di /var/log/messages
> Aug  2 15:18:05 zampo1 kernel: agpgart: Found an AGP 2.0 compliant 
> device at 0000:00:00.0.
> Aug  2 15:18:05 zampo1 kernel: agpgart: Putting AGP V2 device at 
> 0000:00:00.0 into 1x mode
> Aug  2 15:18:05 zampo1 kernel: agpgart: Putting AGP V2 device at 
> 0000:01:00.0 into 1x mode
> Aug  2 15:18:05 zampo1 kernel: [drm] Loading R200 Microcode
> Aug  2 15:18:20 zampo1 gconfd (root-4895): Inizializzazione (versione 
> 2.8.1), pid 4895, utente 'root'
> Aug  2 15:18:20 zampo1 gconfd (root-4895): L'indirizzo 
> "xml:readonly:/etc/gconf/gconf.xml.mandatory" è stato risolta ad una 
> fonte di configurazione in sola lettura in posizione 0
> Aug  2 15:18:20 zampo1 gconfd (root-4895): L'indirizzo 
> "xml:readwrite:/root/.gconf" è stato risolto ad una fonte di 
> configurazione scrivibile in posizione 1
> Aug  2 15:18:20 zampo1 gconfd (root-4895): L'indirizzo 
> "xml:readonly:/etc/gconf/gconf.xml.defaults" è stato risolta ad una 
> fonte di configurazione in sola lettura in posizione 2
> Aug  2 15:18:22 zampo1 gconfd (root-4895): L'indirizzo 
> "xml:readwrite:/root/.gconf" è stato risolto ad una fonte di 
> configurazione scrivibile in posizione 0
> Aug  2 15:24:13 zampo1 modem_run[5087]: modem_run version 1.3.1 started 
> by root uid 0
> 
> Attendo lumi
> 
> a presto
> Daniele Zampighi
> 
> 
> 


Maggiori informazioni sulla lista Imolug