[LTP] [PATCH V3] controllers/cgroup_fj: fix and clean up
Cedric Hnyda
chnyda@suse.com
Thu Nov 5 16:06:35 CET 2015
Many tests were failing on recent kernels because it is not
possible to mount cgroup several times anymore.
Now the test first checks if the cgroup exists. The cgroup
will be mounted (and umounted) only if it doesn't exist at
the start of the test.
It also checks that the subsystem exist before we run the
tests.
A few minor typo mistakes were fixed (expectted instead of
expected).
Most of the tests are now passing.
Signed-off-by: Cedric Hnyda <chnyda@suse.com>
---
.../controllers/cgroup_fj/cgroup_fj_function.sh | 41 ++++++------
.../controllers/cgroup_fj/cgroup_fj_stress.sh | 47 ++++++++------
.../controllers/cgroup_fj/cgroup_fj_utility.sh | 75 ++++++++++++++--------
3 files changed, 99 insertions(+), 64 deletions(-)
diff --git a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_function.sh b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_function.sh
index 3167fab..a4ca0d0 100755
--- a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_function.sh
+++ b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_function.sh
@@ -37,6 +37,7 @@ noprefix_use_str="";
release_agent_para_str="";
notify_on_release_str="";
release_agent_str="";
+mounted=1;
expected=1;
@@ -132,6 +133,8 @@ if [ "$#" -ne "9" ]; then
exit -1;
fi
+mount_point=$(get_mount_point)
+
check_para;
if [ $? -ne 0 ]; then
usage;
@@ -139,7 +142,9 @@ if [ $? -ne 0 ]; then
fi
setup;
-mount_cgroup;
+if [ $mounted -ne 1 ]; then
+ mount_cgroup;
+fi
$TESTROOT/cgroup_fj_proc &
pid=$!
@@ -148,15 +153,15 @@ mkdir_subgroup;
# cpuset.cpus and cpuset.mems should be specified with suitable value
# before attaching operation if subsystem is cpuset
-if [ "$subsystem" == "cpuset" ] || [ "$subsystem" == "all" ] || [ $subsystem == "none" ] ; then
+if [ "$subsystem" == "cpuset" ] || [ "$subsystem" == "all" ] || [ "$subsystem" == "none" ] ; then
exist=`grep -w cpuset /proc/cgroups | cut -f1`;
if [ "$exist" != "" ]; then
if [ "$noprefix_use" == "no" ]; then
- do_echo 1 1 `cat /dev/cgroup/cpus` /dev/cgroup/subgroup_1/cpus;
- do_echo 1 1 `cat /dev/cgroup/mems` /dev/cgroup/subgroup_1/mems;
+ do_echo 1 1 `cat $mount_point/cpus` $mount_point/subgroup_1/cpus;
+ do_echo 1 1 `cat $mount_point/mems` $mount_point/subgroup_1/mems;
else
- do_echo 1 1 `cat /dev/cgroup/cpuset.cpus` /dev/cgroup/subgroup_1/cpuset.cpus;
- do_echo 1 1 `cat /dev/cgroup/cpuset.mems` /dev/cgroup/subgroup_1/cpuset.mems;
+ do_echo 1 1 `cat $mount_point/cpuset.cpus` $mount_point/subgroup_1/cpuset.cpus;
+ do_echo 1 1 `cat $mount_point/cpuset.mems` $mount_point/subgroup_1/cpuset.mems;
fi
fi
fi
@@ -166,12 +171,12 @@ case $attach_operation in
"1" )
;;
"2" )
- do_echo 1 1 $pid /dev/cgroup/subgroup_1/tasks;
+ do_echo 1 1 $pid $mount_point/subgroup_1/tasks;
;;
"3" )
$TESTROOT/cgroup_fj_proc &
pid2=$!
- cat /dev/cgroup/tasks > $TMPFILE
+ cat $mount_point/tasks > $TMPFILE
nlines=`cat $TMPFILE | wc -l`
for i in `seq 1 $nlines`
do
@@ -190,12 +195,12 @@ case $attach_operation in
continue
fi
fi
- do_echo 1 1 "$cur_pid" /dev/cgroup/subgroup_1/tasks
+ do_echo 1 1 "$cur_pid" $mount_point/subgroup_1/tasks
fi
done
;;
"4" )
- do_echo 1 1 $pid /dev/cgroup/subgroup_1/tasks;
+ do_echo 1 1 $pid $mount_point/subgroup_1/tasks;
sleep 1
do_kill 1 1 10 $pid
;;
@@ -214,18 +219,18 @@ esac
#if [ $notify_on_release -ne 0 ] && [ $notify_on_release -ne 1 ] && [ $notify_on_release -ne 2 ];then
# expected=0
#fi
-do_echo 1 $expected $notify_on_release_str /dev/cgroup/subgroup_1/notify_on_release;
+do_echo 1 $expected $notify_on_release_str $mount_point/subgroup_1/notify_on_release;
# echo release_agent that analysed from parameter
if [ $release_agent_echo -ne 1 ]; then
- do_echo 1 1 $release_agent_str /dev/cgroup/release_agent;
+ do_echo 1 1 $release_agent_str $mount_point/release_agent;
fi
sleep 1
# pid could not be echoed from subgroup if subsystem is ( or include ) ns,
# so we kill them here
-if [ "$subsystem" == "ns" ] || [ "$subsystem" == "all" ] || [ $subsystem == "none" ] ; then
+if [ "$subsystem" == "ns" ] || [ "$subsystem" == "all" ] || [ "$subsystem" == "none" ] ; then
do_kill 1 1 9 $pid
do_kill 1 1 9 $pid2
# removing operation
@@ -234,20 +239,20 @@ else
"1" )
;;
"2" )
- do_echo 1 1 $pid /dev/cgroup/tasks
+ do_echo 1 1 $pid $mount_point/tasks
if [ $pid2 -ne 0 ] ; then
- do_echo 1 1 $pid2 /dev/cgroup/tasks
+ do_echo 1 1 $pid2 $mount_point/tasks
fi
;;
"3" )
- cat /dev/cgroup/subgroup_1/tasks > $TMPFILE
+ cat $mount_point/subgroup_1/tasks > $TMPFILE
nlines=`cat $TMPFILE | wc -l`
if [ $nlines -ne 0 ]; then
for i in `seq 1 $nlines`
do
cur_pid=`sed -n "$i""p" $TMPFILE`
if [ -e /proc/$cur_pid/ ];then
- do_echo 1 1 "$cur_pid" /dev/cgroup/tasks
+ do_echo 1 1 "$cur_pid" $mount_point/tasks
fi
done
fi
@@ -264,7 +269,7 @@ fi
sleep 1
-do_rmdir 0 1 /dev/cgroup/subgroup_*
+do_rmdir 0 1 $mount_point/subgroup_*
cleanup;
do_kill 1 1 9 $pid
diff --git a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_stress.sh b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_stress.sh
index daab096..12cdbb0 100755
--- a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_stress.sh
+++ b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_stress.sh
@@ -40,6 +40,7 @@ subgroup_hiers=$4 #number of subgroup's hierarchy
attach_operation=$5 # 1: attach one process to every subcgroup
# 2: attach all processes in root group to one subcgroup
# 3: attach all processes in root group to every subcgroup
+mounted=1
usage()
{
@@ -73,7 +74,6 @@ usage()
echo " will create one hierarchy, will attach one process to every subcgroup"
}
-
exit_parameter()
{
echo "ERROR: Wrong input parameters... Exiting test"
@@ -85,6 +85,8 @@ export TMPFILE=$TESTROOT/tmp_tasks
. $TESTROOT/cgroup_fj_utility.sh
+mount_point=$(get_mount_point)
+
pid=0;
release_agent_para=1;
release_agent_echo=1;
@@ -108,7 +110,7 @@ get_subgroup_path1()
return;
fi
- cur_subgroup_path1="/dev/cgroup/subgroup_$1/"
+ cur_subgroup_path1="$mount_point/subgroup_$1/"
}
@@ -148,9 +150,14 @@ esac
########################## main #######################
-setup;
+if ! [ "$subsystem" == "all" ] && ! [ "$subsystem" == "none" ] ; then
+ exist_subsystem;
+fi
-mount_cgroup;
+setup;
+if [ $mounted -ne 1 ]; then
+ mount_cgroup;
+fi
$TESTROOT/cgroup_fj_proc &
pid=$!
@@ -161,8 +168,8 @@ exist_cpuset=0
exist_cpuset=`grep -w cpuset /proc/cgroups | cut -f1`;
if [ "$subsystem" == "cpuset" ] || [ "$subsystem" == "all" ] ; then
if [ "$exist_cpuset" != "" ]; then
- cpus=`cat /dev/cgroup/cpuset.cpus`
- mems=`cat /dev/cgroup/cpuset.mems`
+ cpus=`cat $mount_point/cpuset.cpus`
+ mems=`cat $mount_point/cpuset.mems`
fi
fi
@@ -172,8 +179,8 @@ mkdir_subgroup;
# before attachint operation if subsystem is cpuset
if [ "$subsystem" == "cpuset" ] || [ "$subsystem" == "all" ] ; then
if [ "$exist_cpuset" != "" ]; then
- do_echo 1 1 "$cpus" /dev/cgroup/subgroup_1/cpuset.cpus;
- do_echo 1 1 "$mems" /dev/cgroup/subgroup_1/cpuset.mems;
+ do_echo 1 1 "$cpus" $mount_point/subgroup_1/cpuset.cpus;
+ do_echo 1 1 "$mems" $mount_point/subgroup_1/cpuset.mems;
fi
fi
@@ -181,23 +188,25 @@ if [ $mount_times -ne 1 ]; then
count=0
for i in `seq 1 $mount_times`
do
- do_echo 1 1 $pid /dev/cgroup/subgroup_1/tasks
+ do_echo 1 1 $pid $mount_point/subgroup_1/tasks
if [ "$subsystem" == "ns" ] || [ "$subsystem" == "all" ] ; then
do_kill 1 1 9 $pid
$TESTROOT/cgroup_fj_proc &
pid=$!
else
- do_echo 1 1 $pid /dev/cgroup/tasks
+ do_echo 1 1 $pid $mount_point/tasks
fi
setup;
$TESTROOT/cgroup_fj_proc &
pid=$!
- mount_cgroup;
+ if [ $mounted -ne 1 ]; then
+ mount_cgroup;
+ fi
mkdir_subgroup;
if [ "$subsystem" == "cpuset" ] || [ "$subsystem" == "all" ] ; then
if [ "$exist_cpuset" != "" ]; then
- do_echo 1 1 "$cpus" /dev/cgroup/subgroup_1/cpuset.cpus;
- do_echo 1 1 "$mems" /dev/cgroup/subgroup_1/cpuset.mems;
+ do_echo 1 1 "$cpus" $mount_point/subgroup_1/cpuset.cpus;
+ do_echo 1 1 "$mems" $mount_point/subgroup_1/cpuset.mems;
fi
fi
let "count = $count + 1"
@@ -244,12 +253,12 @@ else
do
do_echo 1 1 $pid "${pathes[$i]}""tasks"
done
- do_echo 1 1 $pid /dev/cgroup/tasks
+ do_echo 1 1 $pid $mount_point/tasks
;;
"2" )
- pathes2[0]="/dev/cgroup/"
+ pathes2[0]="$mount_point"
pathes2[1]="${pathes[$count]}"
- pathes2[3]="/dev/cgroup/"
+ pathes2[3]="$mount_point/"
for i in `seq 1 $nlines`
do
j=$i
@@ -271,8 +280,8 @@ else
"3" )
count2=$count
let "count2 = $count2 + 1"
- pathes[0]="/dev/cgroup/"
- pathes[$count2]="/dev/cgroup/"
+ pathes[0]="$mount_point/"
+ pathes[$count2]="$mount_point/"
for i in `seq 0 $count`
do
j=$i
@@ -303,7 +312,7 @@ else
done
fi
-do_rmdir 0 1 /dev/cgroup/subgroup_*
+do_rmdir 0 1 $mount_point/subgroup_*
sleep 1
diff --git a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_utility.sh b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_utility.sh
index 9782f45..1fd8f5a 100755
--- a/testcases/kernel/controllers/cgroup_fj/cgroup_fj_utility.sh
+++ b/testcases/kernel/controllers/cgroup_fj/cgroup_fj_utility.sh
@@ -50,6 +50,12 @@ exist_subsystem()
fi
}
+get_mount_point()
+{
+ check_point=`grep -w $subsystem /proc/mounts | cut -f 2 | cut -d " " -f2`
+ echo $check_point
+}
+
get_subsystem()
{
case $subsystem in
@@ -234,18 +240,17 @@ do_exit()
fi
exit_here=$1
- expectted=$2
+ expected=$2
exit_status=$3
-
if [ $exit_status -eq 0 ] ;then
- if [ $expectted -lt 1 ]; then
+ if [ $expected -lt 1 ]; then
if [ $exit_here -ge 1 ]; then
cleanup;
exit -1
fi
fi
else
- if [ $expectted -ge 1 ]; then
+ if [ $expected -ge 1 ]; then
if [ $exit_here -ge 1 ]; then
cleanup;
exit -1
@@ -369,7 +374,6 @@ do_mount()
echo "\"mount -t cgroup $para_o $something $target\" (expected: fail)"
fi
fi
-
mount -t cgroup $para_o $something $target
do_exit $exit_here $expected $?;
}
@@ -451,10 +455,24 @@ do_kill()
setup()
{
- if [ -e /dev/cgroup ]; then
+ # Current test will fail if the previous one failed to rmdir
+ # so try to remove all subgroups
+ rm -rf $mount_point/subgroup_*
+
+ if [ "$mount_point" == "" ] ; then
+ mounted=0
+ mount_point=/dev/cgroup
+ fi
+
+ if [ -e $mount_point ] && [ $mounted -ne 1 ]; then
+ rm -rf /dev/cgroup
cleanup;
fi
- do_mkdir 1 1 /dev/cgroup
+
+ if [ $mounted -ne 1 ]; then
+ do_mkdir 1 1 $mount_point
+ fi
+
if [ -e $TESTROOT/cgroup_fj_release_agent ]
then
@@ -493,47 +511,49 @@ cleanup()
killall -9 cgroup_fj_proc 1>/dev/null 2>&1;
- if [ -e /dev/cgroup/subgroup_1 ]; then
- cat /dev/cgroup/subgroup_1/tasks > $TMPFILE
+ if [ -e $mount_point/subgroup_1 ]; then
+ cat $mount_point/subgroup_1/tasks > $TMPFILE
nlines=`cat $TMPFILE | wc -l`
for i in `seq 1 $nlines`
do
cur_pid=`sed -n "$i""p" $TMPFILE`
if [ -e /proc/$cur_pid/ ];then
- do_echo 0 1 "$cur_pid" /dev/cgroup/tasks
+ do_echo 0 1 "$cur_pid" $mount_point/tasks
fi
done
- do_rmdir 0 1 /dev/cgroup/subgroup_*
+ do_rmdir 0 1 $mount_point/subgroup_*
fi
if [ -e $TMPFILE ]; then
rm -f $TMPFILE 2>/dev/null
fi
- mount_str="`mount -l | grep /dev/cgroup`"
- if [ "$mount_str" != "" ]; then
- do_umount 0 1 /dev/cgroup
- fi
-
- if [ -e /dev/cgroup ]; then
- do_rmdir 0 1 /dev/cgroup
+ if [ $mounted -ne 1 ] ; then
+ mount_str="`mount -l | grep $mount_point`"
+ if [ "$mount_str" != "" ]; then
+ do_umount 0 1 $mount_point
+ fi
+ if [ -e $mount_point ]; then
+ echo "about to rm $mount_point"
+ do_rmdir 0 1 $mount_point
+ fi
fi
}
reclaim_foundling()
{
- if ! [ -e /dev/cgroup/subgroup_1 ]; then
+ if ! [ -e $mount_point/subgroup_1 ]; then
return
fi
foundlings=0
- cat `find /dev/cgroup/subgroup_* -name "tasks"` > $TMPFILE
+ cat `find $mount_point/subgroup_* -name "tasks"` > $TMPFILE
nlines=`cat "$TMPFILE" | wc -l`
for k in `seq 1 $nlines`
do
cur_pid=`sed -n "$k""p" $TMPFILE`
if [ -e /proc/$cur_pid/ ];then
echo "ERROR: pid $cur_pid reclaimed"
- do_echo 0 1 "$cur_pid" "/dev/cgroup/tasks"
+ do_echo 0 1 "$cur_pid" "$mount_point/tasks"
: $((foundlings += 1))
fi
done
@@ -545,18 +565,19 @@ reclaim_foundling()
mkdir_subgroup()
{
- if ! [ -e /dev/cgroup ]; then
- echo "ERROR: /dev/cgroup doesn't exist... Exiting test"
+ if ! [ -e $mount_point ]; then
+ echo "ERROR: $mount_point doesn't exist... Exiting test"
exit -1;
fi
- do_mkdir 1 1 /dev/cgroup/subgroup_1
+ do_mkdir 1 1 $mount_point/subgroup_1
}
mount_cgroup ()
{
expected=1
PARAMETER_O="";
+
if [ "$subsystem" == "abc" ]; then
expected=0
fi
@@ -579,10 +600,10 @@ mount_cgroup ()
fi
if [ "$remount_use_str" != "" ]; then
if [ "$PARAMETER_O" != "" ]; then
- do_mount 1 1 "-o$PARAMETER_O" /dev/cgroup
+ do_mount 1 1 "-o$PARAMETER_O" $mount_point
PARAMETER_O="$PARAMETER_O"",""$remount_use_str"
else
- do_mount 1 1 "" /dev/cgroup
+ do_mount 1 1 "" $mount_point
PARAMETER_O="$remount_use_str"
fi
sleep 1
@@ -592,7 +613,7 @@ mount_cgroup ()
PARAMETER_O="-o""$PARAMETER_O"
fi
- do_mount 1 $expected "$PARAMETER_O" /dev/cgroup
+ do_mount 1 $expected "$PARAMETER_O" $mount_point
}
check_para()
--
2.1.4
More information about the Ltp
mailing list