[LTP] [RFC PATCH v8 11/11] network: Use tools to set up IPv4 and IPv6 related variables
Petr Vorel
pvorel@suse.cz
Fri Aug 18 18:44:37 CEST 2017
Tools (tst_net_ip_prefix, tst_net_iface_prefix, tst_net_vars)
simplify setup as it only needs to have passed 4 IP addresses
(IPv4 lhost + rhost and IPv6 lhost + rhost).
It's possible to define different network part for local
and remote hosts.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
I don't like we don't warn on exit, when error during parsing variables with
tst_net_vars/tst_net_ip_prefix/tst_net_iface_prefix.
---
testcases/lib/test_net.sh | 94 ++++++++++++++--------
testcases/network/stress/interface/if4-addr-change | 17 ++--
2 files changed, 71 insertions(+), 40 deletions(-)
diff --git a/testcases/lib/test_net.sh b/testcases/lib/test_net.sh
index 6c2fb6803..655045f95 100644
--- a/testcases/lib/test_net.sh
+++ b/testcases/lib/test_net.sh
@@ -239,19 +239,10 @@ tst_read_opts $*
tst_ipaddr()
{
local type="${1:-lhost}"
- local ipv="${TST_IPV6:-4}"
- local tst_host
-
- if [ "$type" = "lhost" ]; then
- eval "tst_host=\$LHOST_IPV${ipv}_HOST"
- else
- eval "tst_host=\$RHOST_IPV${ipv}_HOST"
- fi
-
if [ "$TST_IPV6" ]; then
- echo "${IPV6_NETWORK}:${tst_host}"
+ [ "$type" = "lhost" ] && echo "$IPV6_LHOST" || echo "$IPV6_RHOST"
else
- echo "${IPV4_NETWORK}.${tst_host}"
+ [ "$type" = "lhost" ] && echo "$IPV4_LHOST" || echo "$IPV4_RHOST"
fi
}
@@ -361,9 +352,13 @@ tst_add_ipaddr()
{
local type="${1:-lhost}"
local link_num="${2:-0}"
+ local mask
- local mask=24
- [ "$TST_IPV6" ] && mask=64
+ if [ "$TST_IPV6" ]; then
+ [ "$type" = "lhost" ] && mask=$IPV6_LPREFIX || mask=$IPV6_RPREFIX
+ else
+ [ "$type" = "lhost" ] && mask=$IPV4_LPREFIX || mask=$IPV4_RPREFIX
+ fi
local iface=$(tst_iface $type $link_num)
@@ -617,24 +612,54 @@ export PASSWD="${PASSWD:-}"
export LTP_RSH="${LTP_RSH:-rsh -n}"
# Test Links
-# Set first three octets of the network address, default is '10.0.0'
-export IPV4_NETWORK="${IPV4_NETWORK:-10.0.0}"
-# Set local host last octet, default is '2'
-export LHOST_IPV4_HOST="${LHOST_IPV4_HOST:-2}"
-# Set remote host last octet, default is '1'
-export RHOST_IPV4_HOST="${RHOST_IPV4_HOST:-1}"
-# Set the reverse of IPV4_NETWORK
-export IPV4_NET_REV="${IPV4_NET_REV:-0.0.10}"
-# Set first three octets of the network address, default is 'fd00:1:1:1'
-export IPV6_NETWORK="${IPV6_NETWORK:-fd00:1:1:1}"
-# Set local host last octet, default is '2'
-export LHOST_IPV6_HOST="${LHOST_IPV6_HOST:-:2}"
-# Set remote host last octet, default is '1'
-export RHOST_IPV6_HOST="${RHOST_IPV6_HOST:-:1}"
-
-# Networks that aren't reachable through the test links
-export IPV4_NET16_UNUSED="${IPV4_NET16_UNUSED:-10.23}"
-export IPV6_NET32_UNUSED="${IPV6_NET32_UNUSED:-fd00:23}"
+# IPV{4,6}_{L,R}HOST can be set with or without prefix (e.g. IP or IP/prefix),
+# but if you use IP/prefix form, /prefix will be removed by tst_net_vars.
+IPV4_LHOST="${IPV4_LHOST:-10.0.0.2/24}"
+IPV4_RHOST="${IPV4_RHOST:-10.0.0.1/24}"
+IPV6_LHOST="${IPV6_LHOST:-fd00:1:1:1::2/64}"
+IPV6_RHOST="${IPV6_RHOST:-fd00:1:1:1::1/64}"
+
+# tst_net_ip_prefix
+# Strip prefix from IP address and save both If no prefix found sets
+# default prefix.
+#
+# tst_net_iface_prefix reads prefix and interface from rtnetlink.
+# If nothing found sets default prefix value.
+#
+# tst_net_vars exports environment variables related to test links and
+# networks that aren't reachable through the test links.
+#
+# For full list of exported environment variables see:
+# tst_net_ip_prefix -h
+# tst_net_iface_prefix -h
+# tst_net_vars -h
+if [ -z "$TST_PARSE_VARIABLES" ]; then
+ tst_resm TINFO "Parsing IP and prefixes from IPv4 lhost: '$IPV4_LHOST'," \
+ "rhost: '$IPV4_RHOST', IPv6 lhost: '$IPV6_LHOST', rhost: '$IPV6_RHOST'"
+ eval $(tst_net_ip_prefix $IPV4_LHOST || echo "exit $?")
+ eval $(tst_net_ip_prefix -r $IPV4_RHOST || echo "exit $?")
+ eval $(tst_net_ip_prefix $IPV6_LHOST || echo "exit $?")
+ eval $(tst_net_ip_prefix -r $IPV6_RHOST || echo "exit $?")
+fi
+
+if [ -n "$TST_USE_NETNS" ]; then
+ [ "$TST_INIT_NETNS" != "no" ] && init_ltp_netspace || set_ltp_netns_var
+fi
+
+
+if [ -z "$TST_PARSE_VARIABLES" ]; then
+ tst_resm TINFO "Parsing prefixes and ifaces from rtnetlink"
+ eval $(tst_net_iface_prefix $IPV4_LHOST || echo "exit $?")
+ eval $(tst_rhost_run -c 'tst_net_iface_prefix -r '$IPV4_RHOST || echo "exit $?")
+ eval $(tst_net_iface_prefix $IPV6_LHOST || echo "exit $?")
+ eval $(tst_rhost_run -c 'tst_net_iface_prefix -r '$IPV6_RHOST || echo "exit $?")
+
+ tst_resm TINFO "Parsing all remaining variables"
+ eval $(tst_net_vars $IPV4_LHOST/$IPV4_LPREFIX $IPV4_RHOST/$IPV4_RPREFIX || echo "exit $?")
+ eval $(tst_net_vars $IPV6_LHOST/$IPV6_LPREFIX $IPV6_RHOST/$IPV6_RPREFIX || echo "exit $?")
+
+ export TST_PARSE_VARIABLES="yes"
+fi
export HTTP_DOWNLOAD_DIR="${HTTP_DOWNLOAD_DIR:-/var/www/html}"
export FTP_DOWNLOAD_DIR="${FTP_DOWNLOAD_DIR:-/var/ftp}"
@@ -657,14 +682,13 @@ export UPLOAD_REGFILESIZE="${UPLOAD_REGFILESIZE:-1024}"
export MCASTNUM_NORMAL="${MCASTNUM_NORMAL:-20}"
export MCASTNUM_HEAVY="${MCASTNUM_HEAVY:-4000}"
-if [ -n "$TST_USE_NETNS" ]; then
- [ "$TST_INIT_NETNS" != "no" ] && init_ltp_netspace || set_ltp_netns_var
-fi
-
# Warning: make sure to set valid interface names and IP addresses below.
# Set names for test interfaces, e.g. "eth0 eth1"
+# This is fallback for LHOST_IFACES in case tst_net_vars finds nothing or we
+# want to use more ifaces.
export LHOST_IFACES="${LHOST_IFACES:-eth0}"
export RHOST_IFACES="${RHOST_IFACES:-eth0}"
+
# Set corresponding HW addresses, e.g. "00:00:00:00:00:01 00:00:00:00:00:02"
export LHOST_HWADDRS="${LHOST_HWADDRS:-$(tst_get_hwaddrs lhost)}"
export RHOST_HWADDRS="${RHOST_HWADDRS:-$(tst_get_hwaddrs rhost)}"
diff --git a/testcases/network/stress/interface/if4-addr-change b/testcases/network/stress/interface/if4-addr-change
index 567f86643..a7469c252 100644
--- a/testcases/network/stress/interface/if4-addr-change
+++ b/testcases/network/stress/interface/if4-addr-change
@@ -48,12 +48,19 @@ while [ $cnt -lt $NS_TIMES ]; do
[ $num -eq $RHOST_IPV4_HOST ] && continue
- # Change IPv4 address
- lhost_ipv4addr="${IPV4_NETWORK}.${num}"
+ # check prefix and fix values for prefix != 24
+ add_to_net=
+ if [ $IPV4_LPREFIX -lt 8 -o $IPV4_LPREFIX -ge 32 ] ; then
+ tst_brkm TCONF "test must be with prefix >= 8 and prefix < 32 ($IPV4_LPREFIX)"
+ elif [ $IPV4_LPREFIX -lt 16 ]; then # N.x.x.num
+ add_to_net=".0.1"
+ elif [ $IPV4_LPREFIX -lt 24 ]; then # N.N.x.num
+ add_to_net=".1"
+ fi
- ifconfig $(tst_iface) $lhost_ipv4addr netmask 255.255.255.0 \
- broadcast 255.255.255.255 || \
- tst_brkm TFAIL "Failed to change into ${lhost_ipv4addr}"
+ # Change IPv4 address
+ ROD ifconfig $(tst_iface) ${IPV4_LNETWORK}${add_to_net}.${num} netmask \
+ $IPV4_LNETMASK broadcast $IPV4_LBROADCAST
cnt=$(($cnt + 1))
--
2.13.2
More information about the ltp
mailing list