[LTP] [PATCH v2 1/1] network/route: Rewrite route-change-dst into new API
Petr Vorel
pvorel@suse.cz
Mon Jul 23 09:23:32 CEST 2018
Drop route command (use just ip command), simplify.
Use "unused" IP for routes (not affect real traffic).
Validate connection with UDP, sent over tst_netload.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
I wonder if this really stress the interface enough. I still have in
mind to rewrite route-change-{dst,gw,if} into C (use RTNETLINK), that
would be more stressful.
Another option is to have both implementations
- shell based with tst_netload validation and
- C based which just changes destination/gateway/interface without
validating route
Comments are welcome.
Kind regards,
Petr
---
runtest/net_stress.route | 4 +-
.../network/stress/ns-tools/tst_net_stress.sh | 2 +-
.../network/stress/route/00_Descriptions.txt | 17 +-
.../network/stress/route/route-change-dst | 47 +++
.../network/stress/route/route4-change-dst | 276 ------------------
.../network/stress/route/route6-change-dst | 272 -----------------
6 files changed, 53 insertions(+), 565 deletions(-)
mode change 100644 => 100755 testcases/network/stress/ns-tools/tst_net_stress.sh
create mode 100755 testcases/network/stress/route/route-change-dst
delete mode 100644 testcases/network/stress/route/route4-change-dst
delete mode 100644 testcases/network/stress/route/route6-change-dst
diff --git a/runtest/net_stress.route b/runtest/net_stress.route
index 266ef0383..b6ea11c2e 100644
--- a/runtest/net_stress.route
+++ b/runtest/net_stress.route
@@ -2,13 +2,13 @@
# Stress test for routing table
#
-route4-change-dst route4-change-dst
+route4-change-dst route-change-dst
route4-change-gw route4-change-gw
route4-change-if route4-change-if
route4-redirect route4-redirect
route4-rmmod route4-rmmod
-route6-change-dst route6-change-dst
+route6-change-dst route-change-dst -6
route6-change-gw route6-change-gw
route6-change-if route6-change-if
route6-redirect route6-redirect
diff --git a/testcases/network/stress/ns-tools/tst_net_stress.sh b/testcases/network/stress/ns-tools/tst_net_stress.sh
old mode 100644
new mode 100755
index e5c2672a3..0e97e68a8
--- a/testcases/network/stress/ns-tools/tst_net_stress.sh
+++ b/testcases/network/stress/ns-tools/tst_net_stress.sh
@@ -107,7 +107,7 @@ check_connectivity_interval()
check_connectivity $src_iface $dst_addr $cnt
}
-# Run netstress process on both lhost and rhost.
+# Run netstress TCP process on both lhost and rhost.
# make_background_tcp_traffic [IP]
# IP: server IP; Default value is $(tst_ipaddr).
make_background_tcp_traffic()
diff --git a/testcases/network/stress/route/00_Descriptions.txt b/testcases/network/stress/route/00_Descriptions.txt
index 2a871fdae..e9e4d7961 100644
--- a/testcases/network/stress/route/00_Descriptions.txt
+++ b/testcases/network/stress/route/00_Descriptions.txt
@@ -1,10 +1,7 @@
-route4-change-dst01
- Verify the kernel is not crashed when the destination of an IPv4 route
- is changed frequently by route command
+route-change-dst
+ Verify the IPv4/IPv6 is not broken when ip command changes route
+ destination many times
-route4-change-dst02
- Verify the kernel is not crashed when the destination of an IPv4 route
- is changed frequently by ip command
route4-change-gw01
Verify the kernel is not crashed when the gateway of an IPv4 route is
@@ -35,14 +32,6 @@ route4-rmmod02
then it is deleted by the removing network driver
-route6-change-dst01
- Verify the kernel is not crashed when the destination of an IPv6 route
- is changed frequently by route command
-
-route6-change-dst02
- Verify the kernel is not crashed when the destination of an IPv6 route
- is changed frequently by ip command
-
route6-change-gw01
Verify the kernel is not crashed when the gateway of an IPv6 route is
changed frequently by route command
diff --git a/testcases/network/stress/route/route-change-dst b/testcases/network/stress/route/route-change-dst
new file mode 100755
index 000000000..e793f1658
--- /dev/null
+++ b/testcases/network/stress/route/route-change-dst
@@ -0,0 +1,47 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
+# Copyright (c) International Business Machines Corp., 2005
+# Author: Mitsuru Chinen <mitch@jp.ibm.com>
+
+TST_TESTFUNC="do_test"
+TST_SETUP="do_setup"
+TST_CLEANUP="restore_ipaddr"
+TST_NEEDS_CMDS="ip"
+TST_CNT=$NS_TIMES
+TST_NEEDS_TMPDIR=1
+
+. tst_net_stress.sh
+
+do_setup()
+{
+ mask=$IPV4_LPREFIX
+ [ "$TST_IPV6" ] && mask=$IPV6_LPREFIX
+ netstress_setup
+ tst_res TINFO "change IPv$TST_IPVER route destination $NS_TIMES times"
+}
+
+do_test()
+{
+ local iface=$(tst_iface)
+ local addr new_rt
+
+ new_rt="$(tst_ipaddr_un $1)/$mask"
+ addr="$(tst_ipaddr_un $1 1)"
+
+ tst_res TINFO "testing route '$new_rt'"
+ tst_rhost_run -c "ip addr add $addr/$mask dev $(tst_iface rhost)"
+
+ ROD ip route add $new_rt dev $iface
+ ROD ip neigh replace $addr lladdr $(tst_hwaddr rhost) nud permanent dev $iface
+
+ tst_netload -T udp -r 1 -a 1 -H $addr
+
+ ROD ip neigh del $addr lladdr $(tst_hwaddr rhost) dev $iface
+ ROD ip route del $new_rt dev $iface
+ tst_rhost_run -c "ip addr del $addr/$mask dev $(tst_iface rhost)"
+
+ tst_res TPASS "Test passed"
+}
+
+tst_run
diff --git a/testcases/network/stress/route/route4-change-dst b/testcases/network/stress/route/route4-change-dst
deleted file mode 100644
index 86327fad4..000000000
--- a/testcases/network/stress/route/route4-change-dst
+++ /dev/null
@@ -1,276 +0,0 @@
-#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# route4-change-dst
-#
-# Description:
-# Verify the kernel is not crashed when the destination of an IPv4 route is
-# changed frequently
-# test01 - by route command
-# test02 - by ip command
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# Mar 16 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../ ; pwd)`}
-export LTPROOT
-
-# Total number of the test case
-TST_TOTAL=2
-export TST_TOTAL
-
-# Default of the test case ID and the test case count
-TCID=route4-change-dst
-TST_COUNT=0
-export TCID
-export TST_COUNT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# The number of times where route is changed
-NS_TIMES=${NS_TIMES:-10000}
-
-# The number of the test link where tests run
-LINK_NUM=${LINK_NUM:-0}
-
-# Network portion of the IPv4 address
-IPV4_NETWORK=${IPV4_NETWORK:-"10.0.0"}
-
-# Netmask of for the tested network
-IPV4_NETMASK="255.255.255.0"
-IPV4_NETMASK_NUM=24
-
-# Broadcast address of the tested network
-IPV4_BROADCAST=${IPV4_NETWORK}.255
-
-# Host portion of the IPv4 address
-LHOST_IPV4_HOST=${LHOST_IPV4_HOST:-"2"} # src
-RHOST_IPV4_HOST=${RHOST_IPV4_HOST:-"1"} # gateway
-
-# The destination network
-DST_NETWORK_PREFIX="10.10" # destination network would be 10.10.n.0/24
-DST_HOST="5"
-DST_PORT="7"
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_setup
-#
-# DESCRIPTION:
-# Make a IPv4 connectivity
-#
-# SET VALUES:
-# rhost_ipv4addr - IPv4 Address of the remote host
-# lhost_ifname - Interface name of the local host
-# rhost_ifname - Interface name of the remote host
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- TCID=route4-change-dst
- TST_COUNT=0
-
- # Initialize the interfaces of the remote host
- initialize_if rhost ${LINK_NUM}
-
- # Set IPv4 address to the interfaces
- set_ipv4addr rhost ${LINK_NUM} ${IPV4_NETWORK} ${RHOST_IPV4_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add an IPv4 address the remote host"
- exit $TST_TOTAL
- fi
-
- # IPv4 address of the remote host (gateway)
- rhost_ipv4addr="${IPV4_NETWORK}.${RHOST_IPV4_HOST}"
-
- # Get the Interface name of local host
- lhost_ifname=`get_ifname lhost ${LINK_NUM}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- # Get the Interface name of remote host
- rhost_ifname=`get_ifname rhost ${LINK_NUM}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-}
-
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_cleanup
-#
-# DESCRIPTION:
-# Recover the tested interfaces
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- # Initialize the interfaces
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
-}
-
-
-#-----------------------------------------------------------------------
-#
-# FUNCTION:
-# test_body
-#
-# DESCRIPTION:
-# main code of the test
-#
-# Arguments:
-# $1: define the test type
-# 1 - route command case
-# 2 - ip command case
-#
-#-----------------------------------------------------------------------
-test_body()
-{
- test_type=$1
-
- TCID=route4-change-dst0${test_type}
- TST_COUNT=$test_type
-
- case $test_type in
- 1)
- test_command="route"
- ;;
- 2)
- test_command="ip"
- ;;
- *)
- tst_resm TBROK "unspecified case"
- return 1
- ;;
- esac
-
- tst_resm TINFO "Verify the kernel is not crashed when the destination of an IPv4 route is changed frequently by $test_command command in $NS_TIMES times"
-
- # Initialize the interface of the local host
- initialize_if lhost ${LINK_NUM}
-
- # Assign IPv4 address to the interface of the local host
- set_ipv4addr lhost ${LINK_NUM} ${IPV4_NETWORK} ${LHOST_IPV4_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to assign an IPv4 address at the local host"
- return 1
- fi
- lhost_ipv4addr="${IPV4_NETWORK}.${LHOST_IPV4_HOST}"
-
- # Check the connectivity to the gateway
- check_icmpv4_connectivity $lhost_ifname $rhost_ipv4addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Test Link $LINK_NUM is somthing wrong."
- return 1
- fi
-
- # Start the loop
- cnt=0
- while [ $cnt -lt $NS_TIMES ]; do
- # Define the destination IP address
- dst_network_postfix=`expr $cnt % 255`
- dst_addr=${DST_NETWORK_PREFIX}.${dst_network_postfix}.${DST_HOST}
- dst_network=${DST_NETWORK_PREFIX}.${dst_network_postfix}.0
-
- # Add the route
- case $test_type in
- 1)
- route add -net $dst_network netmask 255.255.255.0 gw $rhost_ipv4addr dev $lhost_ifname
- ;;
- 2)
- ip route add ${dst_network}/24 via $rhost_ipv4addr dev $lhost_ifname
- ;;
- esac
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to add the route to ${dst_network}/24"
- return 1
- fi
-
- # Load the route with UDP datagram
- ns-udpsender -f 4 -D $dst_addr -p $DST_PORT -o -s 1472
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
-
- # Delete the route
- case $test_type in
- 1)
- route del -net $dst_network netmask 255.255.255.0 gw $rhost_ipv4addr dev $lhost_ifname
- ;;
- 2)
- ip route del ${dst_network}/24 via $rhost_ipv4addr dev $lhost_ifname
- ;;
- esac
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Cannot delte the route to ${ADDDEL_ROUTE}"
- return 1
- fi
-
- cnt=`expr $cnt + 1`
- done
-
- tst_resm TPASS "Test is finished correctly."
- return 0
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-# Exit Value:
-# The number of the failure
-#
-#-----------------------------------------------------------------------
-
-RC=0
-do_setup
-test_body 1 || RC=`expr $RC + 1` # Case of route command
-test_body 2 || RC=`expr $RC + 1` # Case of ip command
-do_cleanup
-
-exit $RC
diff --git a/testcases/network/stress/route/route6-change-dst b/testcases/network/stress/route/route6-change-dst
deleted file mode 100644
index dfaa2137b..000000000
--- a/testcases/network/stress/route/route6-change-dst
+++ /dev/null
@@ -1,272 +0,0 @@
-#!/bin/sh
-
-################################################################################
-## ##
-## Copyright (c) International Business Machines Corp., 2006 ##
-## ##
-## This program is free software; you can redistribute it and#or modify ##
-## it under the terms of the GNU General Public License as published by ##
-## the Free Software Foundation; either version 2 of the License, or ##
-## (at your option) any later version. ##
-## ##
-## This program is distributed in the hope that it will be useful, but ##
-## WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY ##
-## or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ##
-## for more details. ##
-## ##
-## You should have received a copy of the GNU General Public License ##
-## along with this program; if not, write to the Free Software ##
-## Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA ##
-## ##
-## ##
-################################################################################
-#
-# File:
-# route6-change-dst
-#
-# Description:
-# Verify the kernel is not crashed when the destination of an IPv6 route is
-# changed frequently
-# test01 - by route command
-# test02 - by ip command
-#
-# Setup:
-# See testcases/network/stress/README
-#
-# Author:
-# Mitsuru Chinen <mitch@jp.ibm.com>
-#
-# History:
-# Mar 16 2006 - Created (Mitsuru Chinen)
-#
-#-----------------------------------------------------------------------
-# Uncomment line below for debug output.
-#trace_logic=${trace_logic:-"set -x"}
-$trace_logic
-
-# Make sure the value of LTPROOT
-LTPROOT=${LTPROOT:-`(cd ../../../../ ; pwd)`}
-export LTPROOT
-
-# Total number of the test case
-TST_TOTAL=2
-export TST_TOTAL
-
-# Default of the test case ID and the test case count
-TCID=route6-change-dst
-TST_COUNT=0
-export TCID
-export TST_COUNT
-
-# Check the environmanet variable
-. check_envval || exit $TST_TOTAL
-
-# The number of times where route is changed
-NS_TIMES=${NS_TIMES:-10000}
-
-# The number of the test link where tests run
-LINK_NUM=${LINK_NUM:-0}
-
-# Network portion of the IPv6 address
-IPV6_NETWORK="fec0:1:1:1"
-
-# Netmask of for the tested network
-IPV6_NETMASK_NUM=64
-
-# Host portion of the IPv6 address
-LHOST_IPV6_HOST=":2" # src
-RHOST_IPV6_HOST=":3" # gateway
-
-# The destination network
-DST_NETWORK_PREFIX="fd00:100:1" # dest network would be fd00:100:1:n:::/64
-DST_HOST="5"
-DST_PORT="7"
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_setup
-#
-# DESCRIPTION:
-# Make a IPv6 connectivity
-#
-# SET VALUES:
-# rhost_ipv6addr - IPv6 Address of the remote host
-# lhost_ifname - Interface name of the local host
-# rhost_ifname - Interface name of the remote host
-#
-#-----------------------------------------------------------------------
-do_setup()
-{
- TCID=route6-change-dst
- TST_COUNT=0
-
- # Initialize the interfaces of the remote host
- initialize_if rhost ${LINK_NUM}
-
- # Set IPv6 address to the interfaces
- add_ipv6addr rhost ${LINK_NUM} ${IPV6_NETWORK} ${RHOST_IPV6_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to add an IPv6 address the remote host"
- exit $TST_TOTAL
- fi
-
- # IPv6 address of the remote host (gateway)
- rhost_ipv6addr="${IPV6_NETWORK}:${RHOST_IPV6_HOST}"
-
- # Get the Interface name of local host
- lhost_ifname=`get_ifname lhost ${LINK_NUM}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the local host"
- exit $TST_TOTAL
- fi
-
- # Get the Interface name of remote host
- rhost_ifname=`get_ifname rhost ${LINK_NUM}`
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to get the interface name at the remote host"
- exit $TST_TOTAL
- fi
-}
-
-
-#-----------------------------------------------------------------------
-#
-# NAME:
-# do_cleanup
-#
-# DESCRIPTION:
-# Recover the tested interfaces
-#
-#-----------------------------------------------------------------------
-do_cleanup()
-{
- # Initialize the interfaces
- initialize_if lhost ${LINK_NUM}
- initialize_if rhost ${LINK_NUM}
-}
-
-
-#-----------------------------------------------------------------------
-#
-# FUNCTION:
-# test_body
-#
-# DESCRIPTION:
-# main code of the test
-#
-# Arguments:
-# $1: define the test type
-# 1 - route command case
-# 2 - ip command case
-#
-#-----------------------------------------------------------------------
-test_body()
-{
- test_type=$1
-
- TCID=route6-change-dst0${test_type}
- TST_COUNT=$test_type
-
- case $test_type in
- 1)
- test_command="route"
- ;;
- 2)
- test_command="ip"
- ;;
- *)
- tst_resm TBROK "unspecified case"
- return 1
- ;;
- esac
-
- tst_resm TINFO "Verify the kernel is not crashed when the destination of an IPv6 route is changed frequently by $test_command command in $NS_TIMES times"
-
- # Initialize the interface of the local host
- initialize_if lhost ${LINK_NUM}
-
- # Assign IPv6 address to the interface of the local host
- add_ipv6addr lhost ${LINK_NUM} ${IPV6_NETWORK} ${LHOST_IPV6_HOST}
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Failed to assign an IPv6 address at the local host"
- return 1
- fi
- lhost_ipv6addr="${IPV6_NETWORK}:${LHOST_IPV6_HOST}"
-
- # Check the connectivity to the gateway
- check_icmpv6_connectivity $lhost_ifname $rhost_ipv6addr
- if [ $? -ne 0 ]; then
- tst_resm TBROK "Test Link $LINK_NUM is something wrong."
- return 1
- fi
-
- # Start the loop
- cnt=0
- while [ $cnt -lt $NS_TIMES ]; do
- # Define the destination IP address
- tmp_postfix=`expr $cnt % 65535`
- dst_network_postfix=`printf "%x" $tmp_postfix`
- dst_addr=${DST_NETWORK_PREFIX}:${dst_network_postfix}::${DST_HOST}
- dst_network=${DST_NETWORK_PREFIX}:${dst_network_postfix}::
-
- # Add the route
- case $test_type in
- 1)
- route -A inet6 add ${dst_network}/64 gw $rhost_ipv6addr dev $lhost_ifname
- ;;
- 2)
- ip -f inet6 route add ${dst_network}/64 via $rhost_ipv6addr dev $lhost_ifname
- ;;
- esac
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to add the route to ${dst_network}/64"
- return 1
- fi
-
- # Load the route with UDP datagram
- ns-udpsender -f 6 -D $dst_addr -p $DST_PORT -o -s 1452
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Failed to run a UDP datagram sender"
- return 1
- fi
-
- # Delete the route
- case $test_type in
- 1)
- route -A inet6 del ${dst_network}/64 gw $rhost_ipv6addr dev $lhost_ifname
- ;;
- 2)
- ip -f inet6 route del ${dst_network}/64 via $rhost_ipv6addr dev $lhost_ifname
- ;;
- esac
- if [ $? -ne 0 ]; then
- tst_resm TFAIL "Cannot delte the route to ${ADDDEL_ROUTE}"
- return 1
- fi
-
- cnt=`expr $cnt + 1`
- done
-
- tst_resm TPASS "Test is finished correctly."
- return 0
-}
-
-
-#-----------------------------------------------------------------------
-#
-# Main
-#
-# Exit Value:
-# The number of the failure
-#
-#-----------------------------------------------------------------------
-
-RC=0
-do_setup
-test_body 1 || RC=`expr $RC + 1` # Case of route command
-test_body 2 || RC=`expr $RC + 1` # Case of ip command
-do_cleanup
-
-exit $RC
--
2.18.0
More information about the ltp
mailing list