[LTP] [PATCH 6/6] net/{stress, virt}: Migrate tests using virt_lib.sh and ipsec_lib.sh
Petr Vorel
pvorel@suse.cz
Mon Jun 18 19:37:07 CEST 2018
+ these libraries itself.
It was needed to migrate it all in once, as macsec0{1,2}.sh tests are
using both libraries.
This includes:
* Create setup, getopts and helper function for both libraries.
* Using TST_TEST_DATA and TST_TEST_DATA_IFS in many test cases
(simplify tests and allow to have more TST_CNT to keep readability of
output + required by udp_ipsec.sh and udp_ipsec_vti.sh otherwise it'd
need to use getopts to determine type of udp, as passing parameter to
tst_run is not not recommended to new API).
* Put code into TST_TESTFUNC functions.
* Move anything based on TST_IPV6 to TST_SETUP setup functions (as
TST_IPV6 is not set until setup)
Other changes:
* udp_ipsec{,_vti}.sh: were calling do_test() twice, with parameter.
Now they use correctly TST_CNT and no params.
Order of running tests changed. Before first were run udp tests for all
items in $IPSEC_SIZE_ARRAY, then all udp_lite tests. Now for each item
in $IPSEC_SIZE_ARRAY both udp and udp_lite tests are run.
* gre01.sh: Move back device type setting (changed in 57738337a
"network/gre01: fix device type setting").
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
testcases/network/stress/dccp/dccp_ipsec.sh | 19 +--
.../network/stress/dccp/dccp_ipsec_vti.sh | 19 +--
.../network/stress/icmp/icmp-uni-basic.sh | 26 +--
testcases/network/stress/icmp/icmp-uni-vti.sh | 24 +--
testcases/network/stress/ipsec/ipsec_lib.sh | 141 ++++++++--------
testcases/network/stress/sctp/sctp_ipsec.sh | 20 +--
.../network/stress/sctp/sctp_ipsec_vti.sh | 20 +--
testcases/network/stress/tcp/tcp_ipsec.sh | 22 +--
testcases/network/stress/tcp/tcp_ipsec_vti.sh | 21 +--
testcases/network/stress/udp/udp_ipsec.sh | 24 ++-
testcases/network/stress/udp/udp_ipsec_vti.sh | 24 ++-
testcases/network/virt/geneve01.sh | 42 ++---
testcases/network/virt/gre01.sh | 34 ++--
testcases/network/virt/ipvlan01.sh | 12 +-
testcases/network/virt/macsec01.sh | 30 ++--
testcases/network/virt/macsec02.sh | 32 ++--
testcases/network/virt/macvlan01.sh | 17 +-
testcases/network/virt/macvtap01.sh | 17 +-
testcases/network/virt/virt_lib.sh | 154 +++++++-----------
testcases/network/virt/vlan01.sh | 19 +--
testcases/network/virt/vlan02.sh | 12 +-
testcases/network/virt/vlan03.sh | 50 +++---
testcases/network/virt/vxlan01.sh | 15 +-
testcases/network/virt/vxlan02.sh | 15 +-
testcases/network/virt/vxlan03.sh | 37 +++--
25 files changed, 401 insertions(+), 445 deletions(-)
diff --git a/testcases/network/stress/dccp/dccp_ipsec.sh b/testcases/network/stress/dccp/dccp_ipsec.sh
index d1afd4569..ef80bf979 100755
--- a/testcases/network/stress/dccp/dccp_ipsec.sh
+++ b/testcases/network/stress/dccp/dccp_ipsec.sh
@@ -1,25 +1,18 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=dccp_ipsec
-TST_TOTAL=3
TST_NEEDS_TMPDIR=1
-TST_CLEANUP="tst_ipsec_cleanup"
-
+TST_TESTFUNC=do_test
+TST_SETUP=tst_ipsec_setup
+TST_CLEANUP=tst_ipsec_cleanup
. ipsec_lib.sh
do_test()
{
- for p in $IPSEC_SIZE_ARRAY; do
- tst_netload -H $(tst_ipaddr rhost) -T dccp -n $p -N $p \
- -r $IPSEC_REQUESTS
- done
+ tst_netload -H $(tst_ipaddr rhost) -T dccp -n $2 -N $2 -r $IPSEC_REQUESTS
}
-tst_ipsec_setup
-
-do_test
-
-tst_exit
+tst_run
diff --git a/testcases/network/stress/dccp/dccp_ipsec_vti.sh b/testcases/network/stress/dccp/dccp_ipsec_vti.sh
index f5ff1029d..ee2b0d4ca 100755
--- a/testcases/network/stress/dccp/dccp_ipsec_vti.sh
+++ b/testcases/network/stress/dccp/dccp_ipsec_vti.sh
@@ -1,25 +1,18 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=dccp_ipsec_vti
-TST_TOTAL=3
TST_NEEDS_TMPDIR=1
-TST_CLEANUP="tst_ipsec_cleanup"
-
+TST_TESTFUNC=do_test
+TST_SETUP=tst_ipsec_setup_vti
+TST_CLEANUP=tst_ipsec_cleanup
. ipsec_lib.sh
do_test()
{
- for p in $IPSEC_SIZE_ARRAY; do
- tst_netload -H $ip_rmt_tun -T dccp -n $p -N $p \
- -r $IPSEC_REQUESTS
- done
+ tst_netload -H $ip_rmt_tun -T dccp -n $2 -N $2 -r $IPSEC_REQUESTS
}
-tst_ipsec_setup_vti
-
-do_test
-
-tst_exit
+tst_run
diff --git a/testcases/network/stress/icmp/icmp-uni-basic.sh b/testcases/network/stress/icmp/icmp-uni-basic.sh
index b168a821c..5980b81e5 100755
--- a/testcases/network/stress/icmp/icmp-uni-basic.sh
+++ b/testcases/network/stress/icmp/icmp-uni-basic.sh
@@ -1,21 +1,25 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2016 Red Hat Inc., All Rights Reserved.
# Copyright (c) International Business Machines Corp., 2005
# Author: Hangbin Liu <haliu@redhat.com>
-TCID=${TCID:-icmp-uni-basic}
-TST_TOTAL=1
-TST_COUNT=1
-TST_CLEANUP="tst_ipsec_cleanup"
-
+TST_TESTFUNC=do_test
+TST_SETUP=do_setup
+TST_CLEANUP=tst_ipsec_cleanup
. ipsec_lib.sh
-tst_ipsec_setup
-
-PING_MAX="$IPSEC_REQUESTS"
+do_setup()
+{
+ tst_ipsec_setup
+ PING_MAX="$IPSEC_REQUESTS"
+ tst_res TINFO "Sending ICMP messages"
+}
-tst_resm TINFO "Sending ICMP messages"
-tst_ping $(tst_iface) $(tst_ipaddr rhost) $IPSEC_SIZE_ARRAY
+do_test()
+{
+ tst_ping $(tst_iface) $(tst_ipaddr rhost) $2
+}
-tst_exit
+tst_run
diff --git a/testcases/network/stress/icmp/icmp-uni-vti.sh b/testcases/network/stress/icmp/icmp-uni-vti.sh
index 9a7fba59f..24eca177c 100755
--- a/testcases/network/stress/icmp/icmp-uni-vti.sh
+++ b/testcases/network/stress/icmp/icmp-uni-vti.sh
@@ -1,24 +1,24 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2016 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=icmp-uni-vti
-TST_TOTAL=1
-TST_CLEANUP="tst_ipsec_cleanup"
-
+TST_TESTFUNC=do_test
+TST_SETUP=do_setup
+TST_CLEANUP=tst_ipsec_cleanup
. ipsec_lib.sh
-do_test()
+do_setup()
{
+ tst_ipsec_setup_vti
PING_MAX="$IPSEC_REQUESTS"
-
- tst_resm TINFO "Sending ICMP messages"
- tst_ping $tst_vti $ip_rmt_tun $IPSEC_SIZE_ARRAY
+ tst_res TINFO "Sending ICMP messages"
}
-tst_ipsec_setup_vti
-
-do_test
+do_test()
+{
+ tst_ping $tst_vti $ip_rmt_tun $2
+}
-tst_exit
+tst_run
diff --git a/testcases/network/stress/ipsec/ipsec_lib.sh b/testcases/network/stress/ipsec/ipsec_lib.sh
index e851d46e4..6112862ae 100644
--- a/testcases/network/stress/ipsec/ipsec_lib.sh
+++ b/testcases/network/stress/ipsec/ipsec_lib.sh
@@ -17,26 +17,24 @@ CALGO="deflate"
IPSEC_REQUESTS="500"
IPSEC_SIZE_ARRAY="${IPSEC_SIZE_ARRAY:-10:100:1000:2000:10000:65000}"
+ipsec_lib_usage()
+{
+ echo "l n n is the number of test link when tests run"
+ echo "m x x is ipsec mode, could be transport / tunnel"
+ echo "p x x is ipsec protocol, could be ah / esp / comp"
+ echo "s x x is icmp message size array"
+ echo "S n n is IPsec SPI value"
+ echo "k x key for vti interface"
+ echo "A x Authenticated encryption with associated data algorithm"
+ echo "e x Encryption algorithm"
+ echo "a x Authentication algorithm"
+ echo "c x Compression algorithm"
+ echo "r x Num of requests, PING_MAX or netstress' '-r' opt"
+}
+
ipsec_lib_parse_args()
{
case "$1" in
- h)
- echo "Usage:"
- echo "h help"
- echo "l n n is the number of test link when tests run"
- echo "m x x is ipsec mode, could be transport / tunnel"
- echo "p x x is ipsec protocol, could be ah / esp / comp"
- echo "s x x is icmp message size array (items separated by ':')"
- echo "S n n is IPsec SPI value"
- echo "k x key for vti interface"
- echo "A x Authenticated encryption with associated data algorithm"
- echo "e x Encryption algorithm"
- echo "a x Authentication algorithm"
- echo "c x Compression algorithm"
- echo "r x Num of requests, PING_MAX or netstress' '-r' opt"
- echo "6 run over IPv6"
- exit 0
- ;;
l) LINK_NUM=$2 ;;
m) IPSEC_MODE=$2 ;;
p) IPSEC_PROTO=$2 ;;
@@ -48,21 +46,53 @@ ipsec_lib_parse_args()
a) AALGO=$2 ;;
c) CALGO=$2 ;;
r) IPSEC_REQUESTS="$2" ;;
- *) tst_brkm TBROK "unknown option: $1" ;;
esac
+}
+
+ipsec_lib_setup()
+{
+ case $AEALGO in
+ rfc4106_128|rfc4543_128) AEALGO_KEY=$(get_key 160) ;;
+ rfc4106_192|rfc4543_192) AEALGO_KEY=$(get_key 224) ;;
+ rfc4106_256|rfc4543_256) AEALGO_KEY=$(get_key 288) ;;
+ rfc4309_128) AEALGO_KEY=$(get_key 152) ;;
+ rfc4309_192) AEALGO_KEY=$(get_key 216) ;;
+ rfc4309_256) AEALGO_KEY=$(get_key 280) ;;
+ esac
+
+ case $EALGO in
+ des) EALGO_KEY=$(get_key 64) ;;
+ des3_ede) EALGO_KEY=$(get_key 192) ;;
+ cast5) EALGO_KEY=$(get_key 128) ;;
+ blowfish) EALGO_KEY=$(get_key 448) ;;
+ aes|twofish|camellia|serpent) EALGO_KEY=$(get_key 256) ;;
+ *) tst_brk TBROK "unknown enc alg: $EALGO" ;;
+ esac
+
+ case $AALGO in
+ sha1|rmd160) AALGO_KEY=$(get_key 160) ;;
+ sha256) AALGO_KEY=$(get_key 256) ;;
+ sha384) AALGO_KEY=$(get_key 384) ;;
+ sha512) AALGO_KEY=$(get_key 512) ;;
+ *) tst_brk TBROK "unknown auth alg: $AALGO" ;;
+ esac
+
+ SPI=${SPI:-1000}
+ VTI_KEY=${VTI_KEY:-10}
+ cleanup_vti=
+ ALG=
+ ALGR=
- local IFS=":"
- local tmp="$IPSEC_SIZE_ARRAY"
- local p
- for p in $IPSEC_SIZE_ARRAY; do
- tmp="$p "
- done
- IPSEC_SIZE_ARRAY="$tmp"
+ if [ -z "$IPSEC_LIB_IGNORE_IPSEC_SIZE_ARRAY" ]; then
+ TST_TEST_DATA_IFS=":"
+ TST_TEST_DATA="$IPSEC_SIZE_ARRAY"
+ fi
}
-TST_OPTS="hl:m:p:s:S:k:A:e:a:c:r:"
+TST_OPTS="l:m:p:s:S:k:A:e:a:c:r:"
TST_PARSE_ARGS=ipsec_lib_parse_args
-TST_USE_LEGACY_API=1
+TST_SETUP=${TST_SETUP:-ipsec_lib_setup}
+TST_USAGE=ipsec_lib_usage
. tst_net.sh
get_key()
@@ -72,43 +102,12 @@ get_key()
echo "0x$(hexdump -vn $bytes -e '1/1 "%02x"' /dev/urandom)"
}
-case $AEALGO in
-rfc4106_128|rfc4543_128) AEALGO_KEY=$(get_key 160) ;;
-rfc4106_192|rfc4543_192) AEALGO_KEY=$(get_key 224) ;;
-rfc4106_256|rfc4543_256) AEALGO_KEY=$(get_key 288) ;;
-rfc4309_128) AEALGO_KEY=$(get_key 152) ;;
-rfc4309_192) AEALGO_KEY=$(get_key 216) ;;
-rfc4309_256) AEALGO_KEY=$(get_key 280) ;;
-esac
-
-case $EALGO in
-des) EALGO_KEY=$(get_key 64) ;;
-des3_ede) EALGO_KEY=$(get_key 192) ;;
-cast5) EALGO_KEY=$(get_key 128) ;;
-blowfish) EALGO_KEY=$(get_key 448) ;;
-aes|twofish|camellia|serpent) EALGO_KEY=$(get_key 256) ;;
-*) tst_brkm TBROK "unknown enc alg: $EALGO" ;;
-esac
-
-case $AALGO in
-sha1|rmd160) AALGO_KEY=$(get_key 160) ;;
-sha256) AALGO_KEY=$(get_key 256) ;;
-sha384) AALGO_KEY=$(get_key 384) ;;
-sha512) AALGO_KEY=$(get_key 512) ;;
-*) tst_brkm TBROK "unknown auth alg: $AALGO" ;;
-esac
-
-SPI=${SPI:-1000}
-VTI_KEY=${VTI_KEY:-10}
-cleanup_vti=
-ALG=
-ALGR=
-
tst_ipsec_setup()
{
+ ipsec_lib_setup
# Configure SAD/SPD
if [ -n "$IPSEC_MODE" -a -n "$IPSEC_PROTO" ]; then
- tst_resm TINFO "IPsec[$IPSEC_PROTO/$IPSEC_MODE]"
+ tst_res TINFO "IPsec[$IPSEC_PROTO/$IPSEC_MODE]"
tst_ipsec lhost $(tst_ipaddr) $(tst_ipaddr rhost)
tst_ipsec rhost $(tst_ipaddr rhost) $(tst_ipaddr)
fi
@@ -125,8 +124,6 @@ tst_ipsec_cleanup()
ip li del $cleanup_vti 2>/dev/null
tst_rhost_run -c "ip li del $cleanup_vti 2>/dev/null"
fi
-
- [ "$TST_NEEDS_TMPDIR" = 1 ] && tst_rmdir
}
ipsec_set_algoline()
@@ -161,7 +158,7 @@ ipsec_set_algoline()
ALGR=$ALG
;;
*)
- tst_brkm TCONF "tst_ipsec protocol mismatch"
+ tst_brk TCONF "tst_ipsec protocol mismatch"
;;
esac
}
@@ -173,11 +170,11 @@ ipsec_try()
if echo "$output" | grep -q "TERR"; then
echo "$output" | grep -q \
'RTNETLINK answers: Function not implemented' && \
- tst_brkm TCONF "'$@': not implemented"
+ tst_brk TCONF "'$@': not implemented"
echo "$output" | grep -q \
'RTNETLINK answers: Operation not supported' && \
- tst_brkm TCONF "'$@': not supported (maybe missing 'ip${TST_IPV6}_vti' kernel module)"
- tst_brkm TBROK "$@ failed: $output"
+ tst_brk TCONF "'$@': not supported (maybe missing 'ip${TST_IPV6}_vti' kernel module)"
+ tst_brk TBROK "$@ failed: $output"
fi
}
@@ -189,7 +186,7 @@ ipsec_try()
tst_ipsec()
{
if [ $# -ne 3 ]; then
- tst_brkm TCONF "tst_ipsec parameter mismatch"
+ tst_brk TCONF "tst_ipsec parameter mismatch"
fi
local target=$1
@@ -237,7 +234,7 @@ tst_ipsec()
tst_ipsec_vti()
{
if [ $# -ne 4 ]; then
- tst_brkm TCONF "tst_ipsec_vti parameter mismatch"
+ tst_brk TCONF "tst_ipsec_vti parameter mismatch"
fi
local target=$1
@@ -255,7 +252,7 @@ tst_ipsec_vti()
local rd="dev $(tst_iface rhost)"
ip li add type vti help 2>&1 | grep -q vti || \
- tst_brkm TCONF "iproute doesn't support 'vti'"
+ tst_brk TCONF "iproute doesn't support 'vti'"
ipsec_set_algoline
@@ -296,6 +293,8 @@ tst_ipsec_vti()
# * ip_rmt_tun - remote IP address
tst_ipsec_setup_vti()
{
+ ipsec_lib_setup
+
if_loc=$(tst_iface)
if_rmt=$(tst_iface rhost)
@@ -304,7 +303,7 @@ tst_ipsec_setup_vti()
tst_vti="ltp_vti0"
- tst_resm TINFO "Test vti$TST_IPV6 + IPsec[$IPSEC_PROTO/$IPSEC_MODE]"
+ tst_res TINFO "Test vti$TST_IPV6 + IPsec[$IPSEC_PROTO/$IPSEC_MODE]"
tst_ipsec_vti lhost $ip_loc $ip_rmt $tst_vti
tst_ipsec_vti rhost $ip_rmt $ip_loc $tst_vti
@@ -322,7 +321,7 @@ tst_ipsec_setup_vti()
ROD ip route add ${IPV4_NET16_UNUSED}.1.0/$mask dev $tst_vti
fi
- tst_resm TINFO "Add IPs to vti tunnel, " \
+ tst_res TINFO "Add IPs to vti tunnel, " \
"loc: $ip_loc_tun/$mask, rmt: $ip_rmt_tun/$mask"
ROD ip a add $ip_loc_tun/$mask dev $tst_vti nodad
diff --git a/testcases/network/stress/sctp/sctp_ipsec.sh b/testcases/network/stress/sctp/sctp_ipsec.sh
index ee9018f01..8a7b885d9 100755
--- a/testcases/network/stress/sctp/sctp_ipsec.sh
+++ b/testcases/network/stress/sctp/sctp_ipsec.sh
@@ -1,25 +1,19 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=sctp_ipsec
-TST_TOTAL=3
TST_NEEDS_TMPDIR=1
-TST_CLEANUP="tst_ipsec_cleanup"
-
+TST_TESTFUNC=do_test
+TST_SETUP=tst_ipsec_setup
+TST_CLEANUP=tst_ipsec_cleanup
. ipsec_lib.sh
do_test()
{
- for p in $IPSEC_SIZE_ARRAY; do
- tst_netload -H $(tst_ipaddr rhost) -T sctp -n $p -N $p \
- -r $IPSEC_REQUESTS -S $(tst_ipaddr)
- done
+ tst_netload -H $(tst_ipaddr rhost) -T sctp -n $2 -N $2 \
+ -r $IPSEC_REQUESTS -S $(tst_ipaddr)
}
-tst_ipsec_setup
-
-do_test
-
-tst_exit
+tst_run
diff --git a/testcases/network/stress/sctp/sctp_ipsec_vti.sh b/testcases/network/stress/sctp/sctp_ipsec_vti.sh
index ed851475a..d0f24c727 100755
--- a/testcases/network/stress/sctp/sctp_ipsec_vti.sh
+++ b/testcases/network/stress/sctp/sctp_ipsec_vti.sh
@@ -1,25 +1,19 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=sctp_ipsec_vti
-TST_TOTAL=3
TST_NEEDS_TMPDIR=1
-TST_CLEANUP="tst_ipsec_cleanup"
-
+TST_SETUP=tst_ipsec_setup_vti
+TST_CLEANUP=tst_ipsec_cleanup
+TST_TESTFUNC=do_test
. ipsec_lib.sh
do_test()
{
- for p in $IPSEC_SIZE_ARRAY; do
- tst_netload -H $ip_rmt_tun -T sctp -n $p -N $p \
- -r $IPSEC_REQUESTS -S $ip_loc_tun
- done
+ tst_netload -H $ip_rmt_tun -T sctp -n $2 -N $2 -r $IPSEC_REQUESTS \
+ -S $ip_loc_tun
}
-tst_ipsec_setup_vti
-
-do_test
-
-tst_exit
+tst_run
diff --git a/testcases/network/stress/tcp/tcp_ipsec.sh b/testcases/network/stress/tcp/tcp_ipsec.sh
index 0f875948c..d62272db0 100755
--- a/testcases/network/stress/tcp/tcp_ipsec.sh
+++ b/testcases/network/stress/tcp/tcp_ipsec.sh
@@ -1,27 +1,21 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=tcp_ipsec
-TST_TOTAL=3
TST_NEEDS_TMPDIR=1
-TST_CLEANUP="tst_ipsec_cleanup"
+TST_TESTFUNC=do_test
+TST_SETUP=tst_ipsec_setup
+TST_CLEANUP=tst_ipsec_cleanup
+. ipsec_lib.sh
max_requests=10
-. ipsec_lib.sh
-
do_test()
{
- for p in $IPSEC_SIZE_ARRAY; do
- tst_netload -H $(tst_ipaddr rhost) -n $p -N $p \
- -r $IPSEC_REQUESTS -R $max_requests
- done
+ tst_netload -H $(tst_ipaddr rhost) -n $2 -N $2 -r $IPSEC_REQUESTS \
+ -R $max_requests
}
-tst_ipsec_setup
-
-do_test
-
-tst_exit
+tst_run
diff --git a/testcases/network/stress/tcp/tcp_ipsec_vti.sh b/testcases/network/stress/tcp/tcp_ipsec_vti.sh
index 13a67d3bb..f7bbbc6e9 100755
--- a/testcases/network/stress/tcp/tcp_ipsec_vti.sh
+++ b/testcases/network/stress/tcp/tcp_ipsec_vti.sh
@@ -1,27 +1,20 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=tcp_ipsec_vti
-TST_TOTAL=3
TST_NEEDS_TMPDIR=1
-TST_CLEANUP="tst_ipsec_cleanup"
+TST_TESTFUNC=do_test
+TST_SETUP=tst_ipsec_setup_vti
+TST_CLEANUP=tst_ipsec_cleanup
+. ipsec_lib.sh
max_requests=10
-. ipsec_lib.sh
-
do_test()
{
- for p in $IPSEC_SIZE_ARRAY; do
- tst_netload -H $ip_rmt_tun -n $p -N $p \
- -r $IPSEC_REQUESTS -R $max_requests
- done
+ tst_netload -H $ip_rmt_tun -n $2 -N $2 -r $IPSEC_REQUESTS -R $max_requests
}
-tst_ipsec_setup_vti
-
-do_test
-
-tst_exit
+tst_run
diff --git a/testcases/network/stress/udp/udp_ipsec.sh b/testcases/network/stress/udp/udp_ipsec.sh
index 9c46fc6c0..b59070ebe 100755
--- a/testcases/network/stress/udp/udp_ipsec.sh
+++ b/testcases/network/stress/udp/udp_ipsec.sh
@@ -1,26 +1,22 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=udp_ipsec
-TST_TOTAL=6
TST_NEEDS_TMPDIR=1
-TST_CLEANUP="tst_ipsec_cleanup"
-
+TST_TESTFUNC=do_test
+TST_SETUP=tst_ipsec_setup
+TST_CNT=2
+TST_CLEANUP=tst_ipsec_cleanup
. ipsec_lib.sh
do_test()
{
- for p in $IPSEC_SIZE_ARRAY; do
- tst_netload -H $(tst_ipaddr rhost) -T $1 -n $p -N $p \
- -r $IPSEC_REQUESTS
- done
-}
+ local type="udp"
+ [ $1 -eq 2 ] && type="udp_lite"
-tst_ipsec_setup
-
-do_test udp
-do_test udp_lite
+ tst_netload -H $(tst_ipaddr rhost) -T $type -n $2 -N $2 -r $IPSEC_REQUESTS
+}
-tst_exit
+tst_run
diff --git a/testcases/network/stress/udp/udp_ipsec_vti.sh b/testcases/network/stress/udp/udp_ipsec_vti.sh
index 1b138afb6..65b48eaa4 100755
--- a/testcases/network/stress/udp/udp_ipsec_vti.sh
+++ b/testcases/network/stress/udp/udp_ipsec_vti.sh
@@ -1,26 +1,22 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=udp_ipsec_vti
-TST_TOTAL=6
TST_NEEDS_TMPDIR=1
-TST_CLEANUP="tst_ipsec_cleanup"
-
+TST_TESTFUNC=do_test
+TST_CNT=2
+TST_SETUP=tst_ipsec_setup_vti
+TST_CLEANUP=tst_ipsec_cleanup
. ipsec_lib.sh
do_test()
{
- for p in $IPSEC_SIZE_ARRAY; do
- tst_netload -H $ip_rmt_tun -T $1 -n $p -N $p \
- -r $IPSEC_REQUESTS
- done
-}
+ local type="udp"
+ [ $1 -eq 2 ] && type="udp_lite"
-tst_ipsec_setup_vti
-
-do_test udp
-do_test udp_lite
+ tst_netload -H $ip_rmt_tun -T $type -n $2 -N $2 -r $IPSEC_REQUESTS
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/geneve01.sh b/testcases/network/virt/geneve01.sh
index 91d03883d..8ddb97258 100755
--- a/testcases/network/virt/geneve01.sh
+++ b/testcases/network/virt/geneve01.sh
@@ -1,10 +1,9 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2016-2017 Oracle and/or its affiliates.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
-TCID=geneve01
-TST_TOTAL=1
TST_NEEDS_TMPDIR=1
TST_OPTS="hi:d:"
TST_PARSE_ARGS=virt_lib_parse_args
@@ -16,26 +15,29 @@ start_id=16700000
# that is why using here 'vxlan_*' library functions.
vxlan_dst_addr="uni"
+TST_TESTFUNC=do_test
+TST_CLEANUP=virt_cleanup
. virt_lib.sh
VIRT_PERF_THRESHOLD=${VIRT_PERF_THRESHOLD:-160}
[ "$VIRT_PERF_THRESHOLD" -lt 160 ] && VIRT_PERF_THRESHOLD=160
-TST_CLEANUP="virt_cleanup"
-
-if [ -z $ip_local -o -z $ip_remote ]; then
- tst_brkm TBROK "you must specify IP address"
-fi
-
-tst_resm TINFO "the same VNI must work"
-# VNI is 24 bits long, so max value, which is not reserved, is 0xFFFFFE
-vxlan_setup_subnet_$vxlan_dst_addr "id 0xFFFFFE" "id 0xFFFFFE"
-virt_netperf_msg_sizes
-virt_cleanup_rmt
-
-tst_resm TINFO "different VNI shall not work together"
-vxlan_setup_subnet_$vxlan_dst_addr "id 0xFFFFFE" "id 0xFFFFFD"
-virt_minimize_timeout
-virt_compare_netperf "fail"
-
-tst_exit
+do_test()
+{
+ if [ -z $ip_local -o -z $ip_remote ]; then
+ tst_brk TBROK "you must specify IP address"
+ fi
+
+ tst_res TINFO "the same VNI must work"
+ # VNI is 24 bits long, so max value, which is not reserved, is 0xFFFFFE
+ vxlan_setup_subnet_$vxlan_dst_addr "id 0xFFFFFE" "id 0xFFFFFE"
+ virt_netperf_msg_sizes
+ virt_cleanup_rmt
+
+ tst_res TINFO "different VNI shall not work together"
+ vxlan_setup_subnet_$vxlan_dst_addr "id 0xFFFFFE" "id 0xFFFFFD"
+ virt_minimize_timeout
+ virt_compare_netperf "fail"
+}
+
+tst_run
diff --git a/testcases/network/virt/gre01.sh b/testcases/network/virt/gre01.sh
index efb78a940..3173d1b7c 100755
--- a/testcases/network/virt/gre01.sh
+++ b/testcases/network/virt/gre01.sh
@@ -1,5 +1,6 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2015-2017 Oracle and/or its affiliates.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
@@ -7,23 +8,30 @@
# tunnel between two hosts, then will compare TCP performance
# with and without GRE using ping or netstress test.
-TCID=gre01
-TST_TOTAL=1
TST_NEEDS_TMPDIR=1
-
-virt_type="gre"
+TST_TESTFUNC=do_test
+TST_SETUP=do_setup
+TST_CLEANUP=virt_cleanup
. virt_lib.sh
-TST_CLEANUP="virt_cleanup"
+do_setup()
+{
+ virt_type="gre"
+ [ "$TST_IPV6" ] && virt_type="ip6gre"
+ virt_lib_setup
+}
-if [ -z $ip_local -o -z $ip_remote ]; then
- tst_brkm TBROK "you must specify IP address"
-fi
+do_test()
+{
+ if [ -z $ip_local -o -z $ip_remote ]; then
+ tst_brk TBROK "you must specify IP address"
+ fi
-tst_resm TINFO "test $virt_type"
-virt_setup "local $(tst_ipaddr) remote $(tst_ipaddr rhost) dev $(tst_iface)" \
-"local $(tst_ipaddr rhost) remote $(tst_ipaddr) dev $(tst_iface rhost)"
+ tst_res TINFO "test $virt_type"
+ virt_setup "local $(tst_ipaddr) remote $(tst_ipaddr rhost) dev $(tst_iface)" \
+ "local $(tst_ipaddr rhost) remote $(tst_ipaddr) dev $(tst_iface rhost)"
-virt_netperf_msg_sizes
+ virt_netperf_msg_sizes
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/ipvlan01.sh b/testcases/network/virt/ipvlan01.sh
index 426b2cb6b..f49b5ed75 100755
--- a/testcases/network/virt/ipvlan01.sh
+++ b/testcases/network/virt/ipvlan01.sh
@@ -1,20 +1,18 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
# Local test, check if we can create and then delete ipvlan
# interface multiple times.
-TCID=ipvlan01
-TST_TOTAL=2
+TST_TEST_DATA="mode l2,mode l3"
+TST_TEST_DATA_IFS=","
+TST_TESTFUNC=virt_test_02
virt_type="ipvlan"
. virt_lib.sh
-options="mode l2,mode l3"
-
-virt_test_02 "$options"
-
-tst_exit
+tst_run
diff --git a/testcases/network/virt/macsec01.sh b/testcases/network/virt/macsec01.sh
index cf038e7ca..3d8815b27 100755
--- a/testcases/network/virt/macsec01.sh
+++ b/testcases/network/virt/macsec01.sh
@@ -1,5 +1,6 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
@@ -7,13 +8,16 @@
# with default MACsec configuration, compare performance with similar
# IPsec configuration on master interface.
-TCID=macsec01
-TST_TOTAL=16
-TST_NEEDS_TMPDIR=1
-
virt_type="macsec"
VIRT_PERF_THRESHOLD=${VIRT_PERF_THRESHOLD:-100}
+IPSEC_MODE="transport"
+IPSEC_PROTO="ah"
+TST_NEEDS_TMPDIR=1
+TST_TESTFUNC=do_test
+TST_SETUP=ipsec_lib_setup
+IPSEC_LIB_IGNORE_IPSEC_SIZE_ARRAY=1
+TST_CLEANUP=cleanup
. ipsec_lib.sh
. virt_lib.sh
@@ -22,15 +26,15 @@ cleanup()
virt_cleanup
tst_ipsec_cleanup
}
-TST_CLEANUP="cleanup"
-IPSEC_MODE=transport
-IPSEC_PROTO=ah
-tst_resm TINFO "setup IPsec $IPSEC_MODE/$IPSEC_PROTO $EALGO"
-tst_ipsec lhost $(tst_ipaddr) $(tst_ipaddr rhost)
-tst_ipsec rhost $(tst_ipaddr rhost) $(tst_ipaddr)
+do_test()
+{
+ tst_res TINFO "setup IPsec $IPSEC_MODE/$IPSEC_PROTO $EALGO"
+ tst_ipsec lhost $(tst_ipaddr) $(tst_ipaddr rhost)
+ tst_ipsec rhost $(tst_ipaddr rhost) $(tst_ipaddr)
-virt_macsec_setup
-virt_netperf_msg_sizes
+ virt_macsec_setup
+ virt_netperf_msg_sizes
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/macsec02.sh b/testcases/network/virt/macsec02.sh
index 63c035e44..ba8c38654 100755
--- a/testcases/network/virt/macsec02.sh
+++ b/testcases/network/virt/macsec02.sh
@@ -1,5 +1,6 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
@@ -7,13 +8,17 @@
# with enabled frame encryption and replay protection, compare
# performance with similar IPsec configuration on master interface.
-TCID=macsec02
-TST_TOTAL=16
-TST_NEEDS_TMPDIR=1
-
virt_type="macsec"
VIRT_PERF_THRESHOLD=${VIRT_PERF_THRESHOLD:-100}
+IPSEC_MODE="transport"
+IPSEC_PROTO="esp_aead"
+EALGO="aes"
+TST_NEEDS_TMPDIR=1
+TST_TESTFUNC=do_test
+TST_SETUP=ipsec_lib_setup
+IPSEC_LIB_IGNORE_IPSEC_SIZE_ARRAY=1
+TST_CLEANUP=cleanup
. ipsec_lib.sh
. virt_lib.sh
@@ -22,16 +27,15 @@ cleanup()
virt_cleanup
tst_ipsec_cleanup
}
-TST_CLEANUP="cleanup"
-IPSEC_MODE=transport
-IPSEC_PROTO=esp_aead
-EALGO=aes
-tst_resm TINFO "setup IPsec $IPSEC_MODE/$IPSEC_PROTO $EALGO"
-tst_ipsec lhost $(tst_ipaddr) $(tst_ipaddr rhost)
-tst_ipsec rhost $(tst_ipaddr rhost) $(tst_ipaddr)
+do_test()
+{
+ tst_res TINFO "setup IPsec $IPSEC_MODE/$IPSEC_PROTO $EALGO"
+ tst_ipsec lhost $(tst_ipaddr) $(tst_ipaddr rhost)
+ tst_ipsec rhost $(tst_ipaddr rhost) $(tst_ipaddr)
-virt_macsec_setup "replay on window 300 encrypt on protect on"
-virt_netperf_msg_sizes
+ virt_macsec_setup "replay on window 300 encrypt on protect on"
+ virt_netperf_msg_sizes
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/macvlan01.sh b/testcases/network/virt/macvlan01.sh
index f37851f50..e739fae97 100755
--- a/testcases/network/virt/macvlan01.sh
+++ b/testcases/network/virt/macvlan01.sh
@@ -1,20 +1,21 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
# Local test, check if we can create and then delete macvlan
# interface multiple times.
-TCID=macvlan01
-TST_TOTAL=4
-
virt_type="macvlan"
-
-. virt_lib.sh
-
options="mode private,mode vepa,mode bridge,mode passthru"
+TST_CNT=4
+TST_TESTFUNC=do_test
+. virt_lib.sh
-virt_test_02 "$options"
+do_test()
+{
+ virt_test_02 "$options"
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/macvtap01.sh b/testcases/network/virt/macvtap01.sh
index 21fd96777..654cf30bd 100755
--- a/testcases/network/virt/macvtap01.sh
+++ b/testcases/network/virt/macvtap01.sh
@@ -1,20 +1,21 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
# Local test, check if we can create and then delete macvtap
# interface multiple times.
-TCID=macvtap01
-TST_TOTAL=4
-
virt_type="macvtap"
-
-. virt_lib.sh
-
options="mode private,mode vepa,mode bridge,mode passthru"
+TST_CNT=4
+TST_TESTFUNC=do_test
+. virt_lib.sh
-virt_test_02 "$options"
+do_test()
+{
+ virt_test_02 "$options"
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/virt_lib.sh b/testcases/network/virt/virt_lib.sh
index eaec33d8f..9b21f6201 100644
--- a/testcases/network/virt/virt_lib.sh
+++ b/testcases/network/virt/virt_lib.sh
@@ -1,5 +1,6 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2014-2017 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
@@ -15,30 +16,52 @@
# them in cleanup function. See "start_vni" variable which can
# solve it.
+TST_SETUP="${TST_SETUP:-virt_lib_setup}"
+TST_CLEANUP="${TST_CLEANUP:-cleanup_vifaces}"
+trap "tst_brk TBROK 'test interrupted'" INT
+
+virt_lib_usage()
+{
+ echo "i n start ID to use"
+ echo "d x VxLAN destination address, 'uni' or 'multi'"
+}
+
virt_lib_parse_args()
{
case "$1" in
- h)
- echo "Usage:"
- echo "h help"
- echo "i n start ID to use"
- echo "d x VxLAN destination address, 'uni' or 'multi'"
- echo "6 run over IPv6"
- exit 0
- ;;
i) start_id=$2 ;;
d) vxlan_dst_addr=$2 ;;
- *)
- tst_brkm TBROK "unknown option: $1"
+ esac
+}
+
+virt_lib_setup()
+{
+ case "$virt_type" in
+ vxlan|geneve)
+ if tst_kvcmp -lt "3.8"; then
+ tst_brk TCONF "test must be run with kernel 3.8 or newer"
+ fi
+
+ if [ "$TST_IPV6" ] && tst_kvcmp -lt "3.12"; then
+ tst_brk TCONF "test must be run with kernels >= 3.12"
+ fi
+
+ # newer versions of 'ip' complain if this option not set
+ ip li add type vxlan help 2>&1 | grep -q dstport && vxlan_dstport=1
;;
esac
+
+ tst_check_cmds "ip"
+
+ virt_add ltp_v0 || \
+ tst_brk TCONF "iproute2 or kernel doesn't support $virt_type"
+
+ ROD_SILENT "ip link delete ltp_v0"
}
-TST_USE_LEGACY_API=1
+TST_NEEDS_ROOT=1
. tst_net.sh
-[ -n "$TST_IPV6" -a "$virt_type" = "gre" ] && virt_type="ip6gre"
-
ip_local=$(tst_ipaddr)
ip_virt_local="$(TST_IPV6= tst_ipaddr_un)"
ip6_virt_local="$(TST_IPV6=6 tst_ipaddr_un)"
@@ -53,7 +76,7 @@ vxlan_dstport=0
cleanup_vifaces()
{
- tst_resm TINFO "cleanup virtual interfaces..."
+ tst_res TINFO "cleanup virtual interfaces..."
local viface=`ip li | sed -nE 's/^[0-9]+: (ltp_v[0-9]+)[@:].+/\1/p'`
for vx in $viface; do
ip link delete $vx
@@ -73,12 +96,8 @@ virt_cleanup_rmt()
virt_cleanup()
{
virt_cleanup_rmt
- [ "$TST_NEEDS_TMPDIR" = 1 ] && tst_rmdir
}
-TST_CLEANUP="cleanup_vifaces"
-trap "tst_brkm TBROK 'test interrupted'" INT
-
virt_add()
{
local vname=$1
@@ -138,11 +157,11 @@ virt_multiple_add_test()
local opt="$@"
local max=$(($start_id + $NS_TIMES - 1))
- tst_resm TINFO "add $NS_TIMES $virt_type, then delete"
+ tst_res TINFO "add $NS_TIMES $virt_type, then delete"
for i in $(seq $start_id $max); do
virt_add ltp_v$i id $i $opt || \
- tst_brkm TFAIL "failed to create 'ltp_v0 $opt'"
+ tst_brk TFAIL "failed to create 'ltp_v0 $opt'"
ROD_SILENT "ip link set ltp_v$i up"
done
@@ -151,7 +170,7 @@ virt_multiple_add_test()
ROD_SILENT "ip link delete ltp_v$i"
done
- tst_resm TPASS "done"
+ tst_res TPASS "done"
}
virt_add_delete_test()
@@ -159,15 +178,15 @@ virt_add_delete_test()
local opt="$@"
local max=$(($NS_TIMES - 1))
- tst_resm TINFO "add/del $virt_type $NS_TIMES times"
+ tst_res TINFO "add/del $virt_type $NS_TIMES times"
for i in $(seq 0 $max); do
virt_add ltp_v0 $opt || \
- tst_brkm TFAIL "failed to create 'ltp_v0 $opt'"
+ tst_brk TFAIL "failed to create 'ltp_v0 $opt'"
ROD_SILENT "ip link set ltp_v0 up"
ROD_SILENT "ip link delete ltp_v0"
done
- tst_resm TPASS "done"
+ tst_res TPASS "done"
}
virt_setup()
@@ -175,11 +194,11 @@ virt_setup()
local opt="$1"
local opt_r="${2:-$1}"
- tst_resm TINFO "setup local ${virt_type} with '$opt'"
+ tst_res TINFO "setup local ${virt_type} with '$opt'"
virt_add ltp_v0 $opt || \
- tst_brkm TBROK "failed to create 'ltp_v0 $opt'"
+ tst_brk TBROK "failed to create 'ltp_v0 $opt'"
- tst_resm TINFO "setup rhost ${virt_type} with '$opt_r'"
+ tst_res TINFO "setup rhost ${virt_type} with '$opt_r'"
virt_add_rhost "$opt_r"
ROD_SILENT "ip addr add ${ip6_virt_local}/64 dev ltp_v0 nodad"
@@ -212,11 +231,11 @@ virt_minimize_timeout()
vxlan_setup_subnet_uni()
{
if tst_kvcmp -lt "3.10"; then
- tst_brkm TCONF "test must be run with kernel 3.10 or newer"
+ tst_brk TCONF "test must be run with kernel 3.10 or newer"
fi
[ "$(ip li add type $virt_type help 2>&1 | grep remote)" ] || \
- tst_brkm TCONF "iproute doesn't support remote unicast address"
+ tst_brk TCONF "iproute doesn't support remote unicast address"
local opt="$1 remote $(tst_ipaddr rhost)"
local opt_r="$2 remote $(tst_ipaddr)"
@@ -265,26 +284,26 @@ virt_compare_netperf()
tst_netload -H $ip_remote $opts -d res_ipv4
local lt="$(cat res_ipv4)"
- tst_resm TINFO "time lan($lt) $virt_type IPv4($vt) and IPv6($vt6) ms"
+ tst_res TINFO "time lan($lt) $virt_type IPv4($vt) and IPv6($vt6) ms"
per=$(( $vt * 100 / $lt - 100 ))
per6=$(( $vt6 * 100 / $lt - 100 ))
case "$virt_type" in
vxlan|geneve)
- tst_resm TINFO "IP4 $virt_type over IP$TST_IPVER slower by $per %"
- tst_resm TINFO "IP6 $virt_type over IP$TST_IPVER slower by $per6 %"
+ tst_res TINFO "IP4 $virt_type over IP$TST_IPVER slower by $per %"
+ tst_res TINFO "IP6 $virt_type over IP$TST_IPVER slower by $per6 %"
;;
*)
- tst_resm TINFO "IP4 $virt_type slower by $per %"
- tst_resm TINFO "IP6 $virt_type slower by $per6 %"
+ tst_res TINFO "IP4 $virt_type slower by $per %"
+ tst_res TINFO "IP6 $virt_type slower by $per6 %"
esac
if [ "$per" -ge "$VIRT_PERF_THRESHOLD" -o \
"$per6" -ge "$VIRT_PERF_THRESHOLD" ]; then
- tst_resm TFAIL "Test failed, threshold: $VIRT_PERF_THRESHOLD %"
+ tst_res TFAIL "Test failed, threshold: $VIRT_PERF_THRESHOLD %"
else
- tst_resm TPASS "Test passed, threshold: $VIRT_PERF_THRESHOLD %"
+ tst_res TPASS "Test passed, threshold: $VIRT_PERF_THRESHOLD %"
fi
}
@@ -292,7 +311,7 @@ virt_check_cmd()
{
$@ > /dev/null 2>&1
if [ $? -ne 0 ]; then
- tst_resm TCONF "'$@' option(s) not supported, skipping it"
+ tst_res TCONF "'$@' option(s) not supported, skipping it"
return 1
fi
ROD_SILENT "ip li delete ltp_v0"
@@ -338,74 +357,25 @@ virt_netperf_msg_sizes()
# Check if we can create then delete virtual interface n times.
# virt_test_01 [OPTIONS]
-# OPTIONS - different options separated by comma.
virt_test_01()
{
start_id="${start_id:-1}"
local opts="${1:-}"
- local n=0
-
- while true; do
- n=$((n + 1))
- p="$(echo $opts | cut -d',' -f$n)"
- if [ -z "$p" -a $n -gt 1 ]; then
- break
- fi
-
- tst_resm TINFO "add $virt_type with '$p'"
-
- virt_check_cmd virt_add ltp_v0 id 0 $p || continue
- virt_multiple_add_test "$p"
- done
+ tst_res TINFO "add $virt_type with '$2'"
+ virt_check_cmd virt_add ltp_v0 id 0 $2 || return
+ virt_multiple_add_test "$2"
}
# Check if we can create then delete virtual interface n times.
# virt_test_02 [OPTIONS]
-# OPTIONS - different options separated by comma.
virt_test_02()
{
start_id="${start_id:-1}"
local opts="${1:-}"
- local n=0
-
- while true; do
- n=$((n + 1))
- p="$(echo $opts | cut -d',' -f$n)"
- if [ -z "$p" -a $n -gt 1 ]; then
- break
- fi
-
- tst_resm TINFO "add and then delete $virt_type with '$p'"
-
- virt_check_cmd virt_add ltp_v0 $p || continue
- virt_add_delete_test "$p"
+ tst_res TINFO "add and then delete $virt_type with '$2'"
- start_id=$(($start_id + $NS_TIMES))
- done
+ virt_check_cmd virt_add ltp_v0 $2 || return
+ virt_add_delete_test "$2"
}
-
-tst_require_root
-
-case "$virt_type" in
-vxlan|geneve)
- if tst_kvcmp -lt "3.8"; then
- tst_brkm TCONF "test must be run with kernel 3.8 or newer"
- fi
-
- if [ "$TST_IPV6" ] && tst_kvcmp -lt "3.12"; then
- tst_brkm TCONF "test must be run with kernels >= 3.12"
- fi
-
- # newer versions of 'ip' complain if this option not set
- ip li add type vxlan help 2>&1 | grep -q dstport && vxlan_dstport=1
-;;
-esac
-
-tst_check_cmds "ip"
-
-virt_add ltp_v0 || \
- tst_brkm TCONF "iproute2 or kernel doesn't support $virt_type"
-
-ROD_SILENT "ip link delete ltp_v0"
diff --git a/testcases/network/virt/vlan01.sh b/testcases/network/virt/vlan01.sh
index 4dceae82f..69d2564cb 100755
--- a/testcases/network/virt/vlan01.sh
+++ b/testcases/network/virt/vlan01.sh
@@ -1,17 +1,11 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
# Local test, check if we can create multiple VLAN interfaces.
-TCID=vlan01
-TST_TOTAL=9
-
-virt_type="vlan"
-
-. virt_lib.sh
-
p0="protocol 802.1Q"
p1="protocol 802.1ad"
lb0="loose_binding off"
@@ -19,9 +13,12 @@ lb1="loose_binding on"
rh0="reorder_hdr off"
rh1="reorder_hdr on"
-options=" ,$p0 $lb0 $rh0,$p0 $lb0 $rh1,$p0 $lb1 $rh0,$p0 $lb1 $rh1,\
-$p1 $lb0 $rh0,$p1 $lb0 $rh1,$p1 $lb1 $rh0,$p1 $lb1 $rh1,"
+virt_type="vlan"
-virt_test_01 "$options"
+TST_TEST_DATA=",$p0 $lb0 $rh0,$p0 $lb0 $rh1,$p0 $lb1 $rh0,$p0 $lb1 $rh1,\
+$p1 $lb0 $rh0,$p1 $lb0 $rh1,$p1 $lb1 $rh0,$p1 $lb1 $rh1"
+TST_TEST_DATA_IFS=","
+TST_TESTFUNC=virt_test_01
+. virt_lib.sh
-tst_exit
+tst_run
diff --git a/testcases/network/virt/vlan02.sh b/testcases/network/virt/vlan02.sh
index 2b84a7cd0..04a8a5c60 100755
--- a/testcases/network/virt/vlan02.sh
+++ b/testcases/network/virt/vlan02.sh
@@ -1,18 +1,20 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2015 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
# Local test, check if we can create and then delete VLAN
# interface 4095 times.
-TCID=vlan02
-TST_TOTAL=1
-
virt_type="vlan"
+TST_TESTFUNC=do_test
. virt_lib.sh
-virt_add_delete_test "id 4094"
+do_test()
+{
+ virt_add_delete_test "id 4094"
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/vlan03.sh b/testcases/network/virt/vlan03.sh
index 33bfaf84c..adadd76fd 100755
--- a/testcases/network/virt/vlan03.sh
+++ b/testcases/network/virt/vlan03.sh
@@ -1,5 +1,6 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2015-2017 Oracle and/or its affiliates.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
@@ -10,20 +11,6 @@
# Test-case 2: The same as above but must fail, because VLAN allows
# to communicate only within the same VLAN segment.
-TCID=vlan03
-TST_TOTAL=6
-TST_NEEDS_TMPDIR=1
-
-virt_type="vlan"
-
-. virt_lib.sh
-
-TST_CLEANUP="virt_cleanup"
-
-if [ -z $ip_local -o -z $ip_remote ]; then
- tst_brkm TBROK "you must specify IP address"
-fi
-
p0="protocol 802.1Q"
p1="protocol 802.1ad"
lb0="loose_binding off"
@@ -31,23 +18,38 @@ lb1="loose_binding on"
rh0="reorder_hdr off"
rh1="reorder_hdr on"
-opts=" ,$p0 $lb0 $rh1,$p1 $lb1 $rh1"
+virt_type="vlan"
+
+TST_NEEDS_TMPDIR=1
+TST_TEST_DATA=",$p0 $lb0 $rh1,$p1 $lb1 $rh1"
+TST_TEST_DATA_IFS=","
+TST_TESTFUNC=do_test
+TST_SETUP=do_setup
+TST_CLEANUP=virt_cleanup
+. virt_lib.sh
-for n in $(seq 1 3); do
- p="$(echo $opts | cut -d',' -f$n)"
+do_setup()
+{
+ if [ -z $ip_local -o -z $ip_remote ]; then
+ tst_brk TBROK "you must specify IP address"
+ fi
+ virt_lib_setup
+}
- virt_check_cmd virt_add ltp_v0 id 0 $p || continue
+do_test()
+{
+ virt_check_cmd virt_add ltp_v0 id 0 $2 || return
- tst_resm TINFO "networks with the same VLAN ID must work"
- virt_setup "id 4094 $p" "id 4094 $p"
+ tst_res TINFO "networks with the same VLAN ID must work"
+ virt_setup "id 4094 $2" "id 4094 $2"
virt_netperf_msg_sizes
virt_cleanup_rmt
- tst_resm TINFO "different VLAN ID shall not work together"
- virt_setup "id 4093 $p" "id 4094 $p"
+ tst_res TINFO "different VLAN ID shall not work together"
+ virt_setup "id 4093 $2" "id 4094 $2"
virt_minimize_timeout
virt_compare_netperf "fail"
virt_cleanup_rmt
-done
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/vxlan01.sh b/testcases/network/virt/vxlan01.sh
index 49bcb942a..027fc6f45 100755
--- a/testcases/network/virt/vxlan01.sh
+++ b/testcases/network/virt/vxlan01.sh
@@ -1,23 +1,28 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2014-2015 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
# Local test, check if we can create multiple VXLAN interfaces.
TCID=vxlan01
-TST_TOTAL=5
TST_OPTS="hi:d:"
TST_PARSE_ARGS=virt_lib_parse_args
+TST_USAGE=virt_lib_usage
virt_type="vxlan"
start_id=16700000
-. virt_lib.sh
-
options="l2miss l3miss,norsc nolearning noproxy,\
ttl 0x01 tos 0x01,ttl 0xff tos 0xff,gbp"
+TST_CNT=5
+TST_TESTFUNC=do_test
+. virt_lib.sh
-virt_test_01 "$options"
+do_test()
+{
+ virt_test_01 "$options"
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/vxlan02.sh b/testcases/network/virt/vxlan02.sh
index dde1dabc8..24e5c4dfb 100755
--- a/testcases/network/virt/vxlan02.sh
+++ b/testcases/network/virt/vxlan02.sh
@@ -1,5 +1,6 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2014-2015 Oracle and/or its affiliates. All Rights Reserved.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
@@ -7,18 +8,22 @@
# interface 5000 times.
TCID=vxlan02
-TST_TOTAL=1
TST_OPTS="hi:d:"
TST_PARSE_ARGS=virt_lib_parse_args
+TST_USAGE=virt_lib_usage
virt_type="vxlan"
start_id=16700000
+TST_TESTFUNC=do_test
. virt_lib.sh
-[ "$TST_IPV6" ] && mult_addr="ff02::abc" || mult_addr="239.1.1.1"
-opt="group $mult_addr"
+do_test()
+{
+ local mult_addr="239.1.1.1"
+ [ "$TST_IPV6" ] && mult_addr="ff02::abc"
-virt_add_delete_test "id $start_id $opt"
+ virt_add_delete_test "id $start_id group $mult_addr"
+}
-tst_exit
+tst_run
diff --git a/testcases/network/virt/vxlan03.sh b/testcases/network/virt/vxlan03.sh
index d8c533cb3..521953f73 100755
--- a/testcases/network/virt/vxlan03.sh
+++ b/testcases/network/virt/vxlan03.sh
@@ -1,5 +1,6 @@
#!/bin/sh
# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2018 Petr Vorel <pvorel@suse.cz>
# Copyright (c) 2014-2017 Oracle and/or its affiliates.
# Author: Alexey Kodanev <alexey.kodanev@oracle.com>
#
@@ -11,10 +12,10 @@
# to communicate only within the same VXLAN segment.
TCID=vxlan03
-TST_TOTAL=4
TST_NEEDS_TMPDIR=1
TST_OPTS="hi:d:"
TST_PARSE_ARGS=virt_lib_parse_args
+TST_USAGE=virt_lib_usage
virt_type="vxlan"
start_id=16700000
@@ -22,6 +23,11 @@ start_id=16700000
# Destination address, can be unicast or multicast address
vxlan_dst_addr="uni"
+TST_TEST_DATA=",gbp"
+TST_TEST_DATA_IFS=","
+TST_NEEDS_TMPDIR=1
+TST_TESTFUNC=do_test
+TST_CLEANUP=virt_cleanup
. virt_lib.sh
# In average cases (with small packets less then 150 bytes) VxLAN slower
@@ -31,30 +37,25 @@ vxlan_dst_addr="uni"
VIRT_PERF_THRESHOLD=${VIRT_PERF_THRESHOLD:-160}
[ "$VIRT_PERF_THRESHOLD" -lt 160 ] && VIRT_PERF_THRESHOLD=160
-TST_CLEANUP="virt_cleanup"
-
-if [ -z $ip_local -o -z $ip_remote ]; then
- tst_brkm TBROK "you must specify IP address"
-fi
-
-opts=" ,gbp"
-
-for n in $(seq 1 2); do
- p="$(echo $opts | cut -d',' -f$n)"
+do_test()
+{
+ if [ -z $ip_local -o -z $ip_remote ]; then
+ tst_brk TBROK "you must specify IP address"
+ fi
- virt_check_cmd virt_add ltp_v0 id 0 $p || continue
+ virt_check_cmd virt_add ltp_v0 id 0 $2 || continue
- tst_resm TINFO "the same VNI must work"
+ tst_res TINFO "the same VNI must work"
# VNI is 24 bits long, so max value, which is not reserved, is 0xFFFFFE
- vxlan_setup_subnet_$vxlan_dst_addr "id 0xFFFFFE $p" "id 0xFFFFFE $p"
+ vxlan_setup_subnet_$vxlan_dst_addr "id 0xFFFFFE $2" "id 0xFFFFFE $2"
virt_netperf_msg_sizes
virt_cleanup_rmt
- tst_resm TINFO "different VNI shall not work together"
- vxlan_setup_subnet_$vxlan_dst_addr "id 0xFFFFFE $p" "id 0xFFFFFD $p"
+ tst_res TINFO "different VNI shall not work together"
+ vxlan_setup_subnet_$vxlan_dst_addr "id 0xFFFFFE $2" "id 0xFFFFFD $2"
virt_minimize_timeout
virt_compare_netperf "fail"
virt_cleanup_rmt
-done
+}
-tst_exit
+tst_run
--
2.17.1
More information about the ltp
mailing list