[LTP] runltp fails with Buildroot
umeshyv
umeshyv@gmail.com
Wed Jun 27 21:05:30 CEST 2018
Hi All,
Please find below complete log of my previous screenshots,
# ./runltp -a [ 769.538489] smsc95xx 1-1.1:1.0 eth0: link up,
100Mbps, full-duplex, lpa 0x41E1
[ 769.551566] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
^C
# ./runltp -a umeshyv@gmail.com -p -o output.log -f sensor_test
INFO: creating /usr/lib/ltp-testsuite/output directory
INFO: creating /usr/lib/ltp-testsuite/results directory
Checking for required user/group ids
'nobody' user id and group found.
'bin' user id and group found.
'daemon' user id and group found.
Users group found.
Sys group found.
Required users/groups exist.
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
NAME=Buildroot
VERSION=2018.02.1
ID=buildroot
VERSION_ID=2018.02.1
PRETTY_NAME="Buildroot 2018.02.1"
Linux buildroot 4.14.39-v7 #7 SMP Mon Jun 4 12:10:05 IST 2018 armv7l GNU/Linux
Gnu C
util-linux version'
util-linux call binary.
util-linux
util-linux n] DEVICE
util-linux
util-linux Format floppy disk
util-linux
util-linux n Don't verify after format
mount /dev/root on / type ext4 (rw,relatime,data=ordered)
mount devtmpfs on /dev type devtmpfs
(rw,relatime,size=457936k,nr_inodes=114484,mode=755)
mount proc on /proc type proc (rw,relatime)
mount devpts on /dev/pts type devpts
(rw,relatime,gid=5,mode=620,ptmxmode=666)
mount tmpfs on /dev/shm type tmpfs (rw,relatime,mode=777)
mount tmpfs on /tmp type tmpfs (rw,relatime)
mount tmpfs on /run type tmpfs
(rw,nosuid,nodev,relatime,mode=755)
mount sysfs on /sys type sysfs (rw,relatime)
modutils directory
/bin/sh: is setuid
Linux C Library 1.0.28
Linux C Library uClibc.so.1
-v: No such file or directory
Procps `--version'
iproute2 binary.
iputils V
Kbd 73:
Sh-utils --v
Modules Loaded ipv6
free reports:
total used free shared buffers cached
Mem: 925092 21064 904028 52 888 3256
-/+ buffers/cache: 16920 908172
Swap: 0 0 0
/proc/cpuinfo
processor : 0
model name : ARMv7 Processor rev 5 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 5
processor : 1
model name : ARMv7 Processor rev 5 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 5
processor : 2
model name : ARMv7 Processor rev 5 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 5
processor : 3
model name : ARMv7 Processor rev 5 (v7l)
BogoMIPS : 38.40
Features : half thumb fastmult vfp edsp neon vfpv3 tls vfpv4
idiva idivt vfpd32 lpae evtstrm
CPU implementer : 0x41
CPU architecture: 7
CPU variant : 0x0
CPU part : 0xc07
CPU revision : 5
Hardware : BCM2835
Revision : a21041
Serial : 0000000093e3c1dd
no big block device was specified on commandline.
Tests which require a big block device are disabled.
You can specify it with option -z
COMMAND: /usr/lib/ltp-testsuite/bin/ltp-pan -e -S -a 145 -n
145 -p -f /tmp/ltp-XXXX9KSUqp/alltests -l
/usr/lib/ltp-testsuite/results/LTP_Rf
LOG File: /usr/lib/ltp-testsuite/results/LTP_RUN_ON-1970_01_01-00h_14m_06s.log
OUTPUT File: /usr/lib/ltp-testsuite/output/output.log
FAILED COMMAND File: /usr/lib/ltp-testsuite/output/LTP_RUN_ON-output.log.failed
TCONF COMMAND File: /usr/lib/ltp-testsuite/output/LTP_RUN_ON-output.log.tconf
Running tests.......
Segmentation fault
INFO: ltp-pan reported some tests FAIL
LTP Version: 20180118
sh: !: unknown operand
tar: removing leading '/' from member names
Created TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
successfully, added /usr/lib/ltp-testsuite/output
tar: invalid option -- u
BusyBox v1.27.2 (2018-05-03 22:47:13 IST) multi-call binary.
Usage: tar -[cxthvO] [-X FILE] [-T FILE] [-f TARFILE] [-C DIR] [FILE]...
Create, extract, or list files from a tar file
Operation:
c Create
x Extract
t List
f Name of TARFILE ('-' for stdin/out)
C Change to DIR before operation
v Verbose
O Extract to stdout
h Follow symlinks
exclude File to exclude
X File with names to exclude
T File with names to include
Cannot Update TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
for adding /usr/lib/ltp-testsuite/results
Gunzipped TAR File: ./LTP_RUN_201801181970_01_01-00h_14m_06s.tar
Starting mailing reports to: umeshyv@gmail.com, file:
./LTP_RUN_201801181970_01_01-00h_14m_06s.tar.gz
./runltp: line 1043: mail: not found
Reports cannot be mailed to: umeshyv@gmail.com
###############################################################
Done executing testcases.
LTP Version: 20180118
###############################################################
#
My LTP test output
# ./sensor_test
sample01 1 TPASS : I2C DRIVER OPEN TEST Passed
---------LTP READ TEST----------
Contents of WHO AM I Register bd
sample01 2 TPASS : I2C READ TEST Passed
----------LTP WRITE TEST--------
sample01 3 TPASS : I2C WRITE TEST Passed
--------SENSOR TEST OUTPUT------
temp low 1
temp high 1
temp out 257
Temperature(without calibration)
= 43.04°C
sample01 0 TINFO : I2C Tests Done!
Thanks
Umamahesh
On Wed 27 Jun, 2018, 14:08 Cyril Hrubis, <chrubis@suse.cz> wrote:
>
> Hi!
> > As suggested runtest was updated and output is attached for your reference
> > and at the end of the test it says reports cannot be mailed.
>
> Can you please send text logs as a text next time?
>
> You are wasting a traffic and time for everyone with screenshots.
>
> > Is there any documentation how runtest is executed.
> >
> > Please suggest.
>
> The runtest file format is explained in the C test case tutorial:
>
> https://github.com/linux-test-project/ltp/wiki/C-Test-Case-Tutorial#3-create-the-test-skeleton
>
> --
> Cyril Hrubis
> chrubis@suse.cz
More information about the ltp
mailing list