[LTP] [PATCH v2 1/3] syscalls/adjtimex02: Convert to new library
Sandeep Patil
sspatil@android.com
Mon Jun 10 02:26:08 CEST 2019
remove UCLINUX checks along the way and simplify the test.
Signed-off-by: Sandeep Patil <sspatil@android.com>
---
v1->v2
======
- Remove the test case structure
- handle expected error numbers in one place (swich statement)
.../kernel/syscalls/adjtimex/adjtimex02.c | 313 +++++-------------
1 file changed, 79 insertions(+), 234 deletions(-)
diff --git a/testcases/kernel/syscalls/adjtimex/adjtimex02.c b/testcases/kernel/syscalls/adjtimex/adjtimex02.c
index 492225f19..122e579cf 100644
--- a/testcases/kernel/syscalls/adjtimex/adjtimex02.c
+++ b/testcases/kernel/syscalls/adjtimex/adjtimex02.c
@@ -1,274 +1,119 @@
+// SPDX-License-Identifier: GPL-2.0
+
/*
* Copyright (c) Wipro Technologies Ltd, 2002. All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- *
+ * AUTHOR : Saji Kumar.V.R <saji.kumar@wipro.com>
*/
-/**********************************************************
- *
- * TEST IDENTIFIER : adjtimex02
- *
- * EXECUTED BY : root / superuser
- *
- * TEST TITLE : Tests for error conditions
- *
- * TEST CASE TOTAL : 6
- *
- * AUTHOR : Saji Kumar.V.R <saji.kumar@wipro.com>
- *
- * SIGNALS
- * Uses SIGUSR1 to pause before test if option set.
- * (See the parse_opts(3) man page).
- *
- * DESCRIPTION
- * Verify that
- * 1) adjtimex(2) fails with errno set to EFAULT if buf does
- * not point to writable memory
- * 2) adjtimex(2) fails with errno set to EINVAL if an attempt
- * is made to set buf.tick to a value < 900000/HZ
- * 3) adjtimex(2) fails with errno set to EINVAL if an attempt
- * is made to set buf.tick to a value > 1100000/HZ
- * 4) adjtimex(2) fails with errno set to EINVAL if an attempt
- * is made to set buf.offset to a value > 512000L
- * (This test case will be executed only if the kernel version
- * is 2.6.25 or below)
- * 5) adjtimex(2) fails with errno set to EINVAL if an attempt
- * is made to set buf.offset to a value < 512000L
- * (This test case will be executed only if the kernel version
- * is 2.6.25 or below)
- * 6) adjtimex(2) fails with errno set to EPERM if buf.mode is
- * non-zero and the user is not super-user.
- *
- * Setup:
- * Setup signal handling.
- * Pause for SIGUSR1 if option specified.
- * Save current parameters in tim_save
- *
- * Test:
- * Loop if the proper options are given.
- * Call test case specific setup if needed
- * call adjtimex with saved timex structure
- * Check return value is between 0 & 5
- * Test passed
- * Otherwise
- * Test failed
- * Call test case specific cleanup if needed
- *
- * Cleanup:
- * Print errno log and/or timing stats if options given
- *
- * USAGE: <for command-line>
- * adjtimex02 [-c n] [-e] [-i n] [-I x] [-P x] [-t] [-h] [-f] [-p]
- * where, -c n : Run n copies concurrently.
- * -e : Turn on errno logging.
- * -h : Show help screen
- * -f : Turn off functional testing
- * -i n : Execute test n times.
- * -I x : Execute test for x seconds.
- * -p : Pause for SIGUSR1 before starting
- * -P x : Pause for x seconds between iterations.
- * -t : Turn on syscall timing.
- *
- ****************************************************************/
-
-#if defined UCLINUX && !__THROW
-/* workaround for libc bug causing failure in sys/timex.h */
-#define __THROW
-#endif
#include <errno.h>
#include <sys/timex.h>
#include <unistd.h>
#include <pwd.h>
-#include "test.h"
-#include "safe_macros.h"
+#include "tst_test.h"
#define SET_MODE ( ADJ_OFFSET | ADJ_FREQUENCY | ADJ_MAXERROR | ADJ_ESTERROR | \
ADJ_STATUS | ADJ_TIMECONST | ADJ_TICK )
-static void setup(void);
-static int setup2(void);
-static int setup3(void);
-static int setup4(void);
-static int setup5(void);
-static int setup6(void);
-static void cleanup(void);
-static void cleanup6(void);
-
-char *TCID = "adjtimex02";
-
static int hz; /* HZ from sysconf */
static struct timex tim_save;
static struct timex buff;
-static char nobody_uid[] = "nobody";
struct passwd *ltpuser;
-struct test_cases_t {
- struct timex *buffp;
- int (*setup) ();
- void (*cleanup) ();
- int exp_errno;
-} test_cases[] = {
-#ifndef UCLINUX
- /* Skip since uClinux does not implement memory protection */
- {
- (struct timex *)-1, NULL, NULL, EFAULT},
-#endif
- {
- &buff, setup2, NULL, EINVAL}, {
- &buff, setup3, NULL, EINVAL}, {
- &buff, setup4, NULL, EINVAL}, {
- &buff, setup5, NULL, EINVAL}, {
- &buff, setup6, cleanup6, EPERM}
-};
-
-int TST_TOTAL = sizeof(test_cases) / sizeof(test_cases[0]);
-
-int main(int ac, char **av)
+void verify_adjtimex(unsigned int nr)
{
-
- int lc, i;
-
- tst_parse_opts(ac, av, NULL, NULL);
-
- setup();
-
- for (lc = 0; TEST_LOOPING(lc); lc++) {
-
- tst_count = 0;
-
- for (i = 0; i < TST_TOTAL; ++i) {
- /*
- * since Linux 2.6.26, if buf.offset value is outside
- * the acceptable range, it is simply normalized instead
- * of letting the syscall fail. so just skip this test
- * case.
- */
- if ((i == 3 || i == 4) && tst_kvercmp(2, 6, 25) > 0) {
- tst_resm(TCONF, "this kernel normalizes buf."
- "offset value if it is outside"
- " the acceptable range.");
- continue;
- }
-
- buff = tim_save;
- buff.modes = SET_MODE;
- if ((test_cases[i].setup) && (test_cases[i].setup())) {
- tst_resm(TWARN, "setup() failed, skipping"
- " this test case");
- continue;
- }
-
- /* Call adjtimex(2) */
- TEST(adjtimex(test_cases[i].buffp));
-
- if ((TEST_RETURN == -1) && (TEST_ERRNO ==
- test_cases[i].exp_errno)) {
- tst_resm(TPASS | TTERRNO,
- "Test Passed, adjtimex() returned -1");
- } else {
- tst_resm(TFAIL | TTERRNO,
- "Test Failed, adjtimex() returned %ld",
- TEST_RETURN);
- }
- if (test_cases[i].cleanup) {
- test_cases[i].cleanup();
- }
- }
+ struct timex *buffp;
+ int expected_errno = 0;
+
+ /*
+ * since Linux 2.6.26, if buf.offset value is outside
+ * the acceptable range, it is simply normalized instead
+ * of letting the syscall fail. so just skip this test
+ * case.
+ */
+ if (nr > 3 && (tst_kvercmp(2, 6, 25) > 0)) {
+ tst_res(TCONF, "this kernel normalizes buf."
+ "offset value if it is outside"
+ " the acceptable range.");
+ return;
}
- /* cleanup and exit */
- cleanup();
+ buff = tim_save;
+ buff.modes = SET_MODE;
+ buffp = &buff;
+ switch (nr) {
+ case 0:
+ buffp = (struct timex *)-1;
+ expected_errno = EFAULT;
+ break;
+ case 1:
+ buff.tick = 900000 / hz - 1;
+ expected_errno = EINVAL;
+ break;
+ case 2:
+ buff.tick = 1100000 / hz + 1;
+ expected_errno = EINVAL;
+ break;
+ case 3:
+ /* Switch to nobody user for correct error code collection */
+ ltpuser = SAFE_GETPWNAM("nobody");
+ SAFE_SETEUID(ltpuser->pw_uid);
+ expected_errno = EPERM;
+ break;
+ case 4:
+ buff.offset = 512000L + 1;
+ expected_errno = EINVAL;
+ break;
+ case 5:
+ buff.offset = (-1) * (512000L) - 1;
+ expected_errno = EINVAL;
+ break;
+ default:
+ tst_brk(TFAIL, "Invalid test case %u ", nr);
+ }
- tst_exit();
+ TEST(adjtimex(buffp));
+ if ((TST_RET == -1) && (TST_ERR == expected_errno)) {
+ tst_res(TPASS | TTERRNO,
+ "adjtimex() error %u ", expected_errno);
+ } else {
+ tst_res(TFAIL | TTERRNO,
+ "Test Failed, adjtimex() returned %ld",
+ TST_RET);
+ }
+ /* clean up after ourselves */
+ if (nr == 3)
+ SAFE_SETEUID(0);
}
-/* setup() - performs all ONE TIME setup for this test */
void setup(void)
{
- tst_require_root();
-
tim_save.modes = 0;
- tst_sig(NOFORK, DEF_HANDLER, cleanup);
-
/* set the HZ from sysconf */
- hz = SAFE_SYSCONF(NULL, _SC_CLK_TCK);
+ hz = SAFE_SYSCONF(_SC_CLK_TCK);
- TEST_PAUSE;
-
- /* Save current parameters in tim_save */
- if ((adjtimex(&tim_save)) == -1) {
- tst_brkm(TBROK, NULL, "Failed to save current parameters");
- }
+ /* Save current parameters */
+ if ((adjtimex(&tim_save)) == -1)
+ tst_brk(TBROK | TERRNO,
+ "adjtimex(): failed to save current params");
}
-/*
- *cleanup() - performs all ONE TIME cleanup for this test at
- * completion or premature exit.
- */
void cleanup(void)
{
-
tim_save.modes = SET_MODE;
- /* Restore saved parameters */
- if ((adjtimex(&tim_save)) == -1) {
- tst_resm(TWARN, "Failed to restore saved parameters");
- }
-}
-
-int setup2(void)
-{
- buff.tick = 900000 / hz - 1;
- return 0;
-}
-
-int setup3(void)
-{
- buff.tick = 1100000 / hz + 1;
- return 0;
-}
-
-int setup4(void)
-{
- buff.offset = 512000L + 1;
- return 0;
-}
-
-int setup5(void)
-{
- buff.offset = (-1) * (512000L) - 1;
- return 0;
-}
-int setup6(void)
-{
- /* Switch to nobody user for correct error code collection */
- if ((ltpuser = getpwnam(nobody_uid)) == NULL) {
- tst_brkm(TBROK, NULL, "\"nobody\" user not present");
- }
- if (seteuid(ltpuser->pw_uid) == -1) {
- tst_resm(TWARN | TERRNO, "seteuid(%d) failed", ltpuser->pw_uid);
- return 1;
- }
- return 0;
+ /* Restore saved parameters */
+ if ((adjtimex(&tim_save)) == -1)
+ tst_res(TWARN, "Failed to restore saved parameters");
}
-void cleanup6(void)
-{
- /* Set effective user id back to root */
- SAFE_SETEUID(cleanup, 0);
-}
+static struct tst_test test = {
+ .needs_root = 1,
+ .tcnt = 6,
+ .setup = setup,
+ .cleanup = cleanup,
+ .test = verify_adjtimex,
+};
--
2.22.0.rc2.383.gf4fbbf30c2-goog
More information about the ltp
mailing list