[LTP] ❌ FAIL: Test report for kernel 5.4.19-rc1-a28430b.cki (stable)
Rachel Sibley
rasibley@redhat.com
Mon Feb 10 22:35:09 CET 2020
On 2/10/20 3:50 PM, CKI Project wrote:
>
> Hello,
>
> We ran automated tests on a recent commit from this kernel tree:
>
> Kernel repo: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
> Commit: a28430b8529b - Linux 5.4.19-rc1
>
> The results of these automated tests are provided below.
>
> Overall result: FAILED (see details below)
> Merge: OK
> Compile: OK
> Tests: FAILED
>
> All kernel binaries, config files, and logs are available for download here:
>
> https://artifacts.cki-project.org/pipelines/430066
>
> One or more kernel tests failed:
>
> ppc64le:
> ❌ LTP
We recently re-enabled fs_fill test by patching it to skip btrfs as it fails often, perhaps more changes are needed ?
I can disable again while we investigate.
https://artifacts.cki-project.org/pipelines/430066/logs/ppc64le_host_1_LTP_fs.run.log
-Rachel
>
> We hope that these logs can help you find the problem quickly. For the full
> detail on our testing procedures, please scroll to the bottom of this message.
>
> Please reply to this email if you have any questions about the tests that we
> ran or if you have any suggestions on how to make future tests more effective.
>
> ,-. ,-.
> ( C ) ( K ) Continuous
> `-',-.`-' Kernel
> ( I ) Integration
> `-'
> ______________________________________________________________________________
>
> Compile testing
> ---------------
>
> We compiled the kernel for 3 architectures:
>
> aarch64:
> make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
>
> ppc64le:
> make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
>
> x86_64:
> make options: -j30 INSTALL_MOD_STRIP=1 targz-pkg
>
>
> Hardware testing
> ----------------
> We booted each kernel and ran the following tests:
>
> aarch64:
> Host 1:
>
> ⚡ Internal infrastructure issues prevented one or more tests (marked
> with ⚡⚡⚡) from running on this architecture.
> This is not the fault of the kernel that was tested.
>
> ⚡⚡⚡ Boot test
> ⚡⚡⚡ xfstests - ext4
> ⚡⚡⚡ xfstests - xfs
> ⚡⚡⚡ selinux-policy: serge-testsuite
> ⚡⚡⚡ lvm thinp sanity
> ⚡⚡⚡ storage: software RAID testing
> ⚡⚡⚡ stress: stress-ng
> 🚧 ⚡⚡⚡ IPMI driver test
> 🚧 ⚡⚡⚡ IPMItool loop stress test
> 🚧 ⚡⚡⚡ Storage blktests
>
> Host 2:
>
> ⚡ Internal infrastructure issues prevented one or more tests (marked
> with ⚡⚡⚡) from running on this architecture.
> This is not the fault of the kernel that was tested.
>
> ✅ Boot test
> ✅ Podman system integration test - as root
> ✅ Podman system integration test - as user
> ⚡⚡⚡ LTP
> ⚡⚡⚡ Loopdev Sanity
> ⚡⚡⚡ Memory function: memfd_create
> ⚡⚡⚡ AMTU (Abstract Machine Test Utility)
> ⚡⚡⚡ Networking bridge: sanity
> ⚡⚡⚡ Ethernet drivers sanity
> ⚡⚡⚡ Networking MACsec: sanity
> ⚡⚡⚡ Networking socket: fuzz
> ⚡⚡⚡ Networking sctp-auth: sockopts test
> ⚡⚡⚡ Networking: igmp conformance test
> ⚡⚡⚡ Networking route: pmtu
> ⚡⚡⚡ Networking route_func - local
> ⚡⚡⚡ Networking route_func - forward
> ⚡⚡⚡ Networking TCP: keepalive test
> ⚡⚡⚡ Networking UDP: socket
> ⚡⚡⚡ Networking tunnel: geneve basic test
> ⚡⚡⚡ Networking tunnel: gre basic
> ⚡⚡⚡ L2TP basic test
> ⚡⚡⚡ Networking tunnel: vxlan basic
> ⚡⚡⚡ Networking ipsec: basic netns - transport
> ⚡⚡⚡ Networking ipsec: basic netns - tunnel
> ⚡⚡⚡ audit: audit testsuite test
> ⚡⚡⚡ httpd: mod_ssl smoke sanity
> ⚡⚡⚡ tuned: tune-processes-through-perf
> ⚡⚡⚡ ALSA PCM loopback test
> ⚡⚡⚡ ALSA Control (mixer) Userspace Element test
> ⚡⚡⚡ storage: SCSI VPD
> ⚡⚡⚡ trace: ftrace/tracer
> 🚧 ⚡⚡⚡ CIFS Connectathon
> 🚧 ⚡⚡⚡ POSIX pjd-fstest suites
> 🚧 ⚡⚡⚡ jvm test suite
> 🚧 ⚡⚡⚡ Memory function: kaslr
> 🚧 ⚡⚡⚡ LTP: openposix test suite
> 🚧 ⚡⚡⚡ Networking vnic: ipvlan/basic
> 🚧 ⚡⚡⚡ iotop: sanity
> 🚧 ⚡⚡⚡ Usex - version 1.9-29
> 🚧 ⚡⚡⚡ storage: dm/common
>
> Host 3:
>
> ⚡ Internal infrastructure issues prevented one or more tests (marked
> with ⚡⚡⚡) from running on this architecture.
> This is not the fault of the kernel that was tested.
>
> ⚡⚡⚡ Boot test
> ⚡⚡⚡ xfstests - ext4
> ⚡⚡⚡ xfstests - xfs
> ⚡⚡⚡ selinux-policy: serge-testsuite
> ⚡⚡⚡ lvm thinp sanity
> ⚡⚡⚡ storage: software RAID testing
> ⚡⚡⚡ stress: stress-ng
> 🚧 ⚡⚡⚡ IPMI driver test
> 🚧 ⚡⚡⚡ IPMItool loop stress test
> 🚧 ⚡⚡⚡ Storage blktests
>
> Host 4:
>
> ⚡ Internal infrastructure issues prevented one or more tests (marked
> with ⚡⚡⚡) from running on this architecture.
> This is not the fault of the kernel that was tested.
>
> ⚡⚡⚡ Boot test
> ⚡⚡⚡ xfstests - ext4
> ⚡⚡⚡ xfstests - xfs
> ⚡⚡⚡ selinux-policy: serge-testsuite
> ⚡⚡⚡ lvm thinp sanity
> ⚡⚡⚡ storage: software RAID testing
> ⚡⚡⚡ stress: stress-ng
> 🚧 ⚡⚡⚡ IPMI driver test
> 🚧 ⚡⚡⚡ IPMItool loop stress test
> 🚧 ⚡⚡⚡ Storage blktests
>
> ppc64le:
> Host 1:
> ✅ Boot test
> ✅ Podman system integration test - as root
> ✅ Podman system integration test - as user
> ❌ LTP
> ✅ Loopdev Sanity
> ✅ Memory function: memfd_create
> ✅ AMTU (Abstract Machine Test Utility)
> ✅ Networking bridge: sanity
> ✅ Ethernet drivers sanity
> ✅ Networking MACsec: sanity
> ✅ Networking socket: fuzz
> ✅ Networking sctp-auth: sockopts test
> ✅ Networking route: pmtu
> ✅ Networking route_func - local
> ✅ Networking route_func - forward
> ✅ Networking TCP: keepalive test
> ✅ Networking UDP: socket
> ✅ Networking tunnel: geneve basic test
> ✅ Networking tunnel: gre basic
> ✅ L2TP basic test
> ✅ Networking tunnel: vxlan basic
> ✅ Networking ipsec: basic netns - tunnel
> ✅ audit: audit testsuite test
> ✅ httpd: mod_ssl smoke sanity
> ✅ tuned: tune-processes-through-perf
> ✅ ALSA PCM loopback test
> ✅ ALSA Control (mixer) Userspace Element test
> ✅ trace: ftrace/tracer
> 🚧 ✅ CIFS Connectathon
> 🚧 ✅ POSIX pjd-fstest suites
> 🚧 ✅ jvm test suite
> 🚧 ✅ Memory function: kaslr
> 🚧 ✅ LTP: openposix test suite
> 🚧 ✅ Networking vnic: ipvlan/basic
> 🚧 ✅ iotop: sanity
> 🚧 ✅ Usex - version 1.9-29
> 🚧 ✅ storage: dm/common
>
> Host 2:
> ✅ Boot test
> ✅ xfstests - ext4
> ✅ xfstests - xfs
> ✅ selinux-policy: serge-testsuite
> ✅ lvm thinp sanity
> ✅ storage: software RAID testing
> 🚧 ✅ IPMI driver test
> 🚧 ✅ IPMItool loop stress test
> 🚧 ✅ Storage blktests
>
> x86_64:
> Host 1:
> ✅ Boot test
> ✅ Podman system integration test - as root
> ✅ Podman system integration test - as user
> ✅ LTP
> ✅ Loopdev Sanity
> ✅ Memory function: memfd_create
> ✅ AMTU (Abstract Machine Test Utility)
> ✅ Networking bridge: sanity
> ✅ Ethernet drivers sanity
> ✅ Networking MACsec: sanity
> ✅ Networking socket: fuzz
> ✅ Networking sctp-auth: sockopts test
> ✅ Networking: igmp conformance test
> ✅ Networking route: pmtu
> ✅ Networking route_func - local
> ✅ Networking route_func - forward
> ✅ Networking TCP: keepalive test
> ✅ Networking UDP: socket
> ✅ Networking tunnel: geneve basic test
> ✅ Networking tunnel: gre basic
> ✅ L2TP basic test
> ✅ Networking tunnel: vxlan basic
> ✅ Networking ipsec: basic netns - transport
> ✅ Networking ipsec: basic netns - tunnel
> ✅ audit: audit testsuite test
> ✅ httpd: mod_ssl smoke sanity
> ✅ tuned: tune-processes-through-perf
> ✅ pciutils: sanity smoke test
> ✅ ALSA PCM loopback test
> ✅ ALSA Control (mixer) Userspace Element test
> ✅ storage: SCSI VPD
> ✅ trace: ftrace/tracer
> 🚧 ✅ CIFS Connectathon
> 🚧 ✅ POSIX pjd-fstest suites
> 🚧 ✅ jvm test suite
> 🚧 ❌ Memory function: kaslr
> 🚧 ✅ LTP: openposix test suite
> 🚧 ✅ Networking vnic: ipvlan/basic
> 🚧 ✅ iotop: sanity
> 🚧 ✅ Usex - version 1.9-29
> 🚧 ✅ storage: dm/common
>
> Host 2:
> ✅ Boot test
> ✅ Storage SAN device stress - mpt3sas driver
>
> Host 3:
> ✅ Boot test
> ✅ xfstests - ext4
> ✅ xfstests - xfs
> ✅ selinux-policy: serge-testsuite
> ✅ lvm thinp sanity
> ✅ storage: software RAID testing
> ✅ stress: stress-ng
> 🚧 ✅ IOMMU boot test
> 🚧 ✅ IPMI driver test
> 🚧 ✅ IPMItool loop stress test
> 🚧 ✅ Storage blktests
>
> Host 4:
> ✅ Boot test
> ✅ Storage SAN device stress - megaraid_sas
>
> Test sources: https://github.com/CKI-project/tests-beaker
> 💚 Pull requests are welcome for new tests or improvements to existing tests!
>
> Waived tests
> ------------
> If the test run included waived tests, they are marked with 🚧. Such tests are
> executed but their results are not taken into account. Tests are waived when
> their results are not reliable enough, e.g. when they're just introduced or are
> being fixed.
>
> Testing timeout
> ---------------
> We aim to provide a report within reasonable timeframe. Tests that haven't
> finished running are marked with ⏱. Reports for non-upstream kernels have
> a Beaker recipe linked to next to each host.
>
>
More information about the ltp
mailing list