[LTP] LTP: syscalls: regression on mainline - ioctl_loop01 mknod07 setns01
Martijn Coenen
maco@android.com
Fri Jun 5 11:11:06 CEST 2020
Hey Yang,
On Fri, Jun 5, 2020 at 10:59 AM Yang Xu <xuyang2018.jy@cn.fujitsu.com> wrote:
>
> Hi Martijn
>
> Sorry for noise. I see your patch in here[1] . I will modify
> ioctl_loop01 to test that LO_FLAGS_PARTSCAN can not clear and
> LO_FLAGS_AUTOCLEAR can be clear.
Thanks, that would indeed be useful.
>
> ps: Giving the url of patch is better so that other people doesn't need
> to investigate it again.
> [1]https://patchwork.kernel.org/patch/11588321/
Ok, will do next time!
Best,
Martijn
>
> Best Regards
> Yang Xu
> > Hi Martijn
> >
> >> Hi Naresh,
> >>
> >> I just sent a patch and cc'd you. I verified all the loop tests pass
> >> again with that patch.
> > I think you want to say "without". I verified the ioctl_loop01 fails
> > with faf1d25440 ("loop: Clean up LOOP_SET_STATUS lo_flags handling").
> >
> > This kernel commit breaks old behaviour(if old flag all 0, new flag is
> > always 0 regradless your flag setting).
> >
> > I think we should modify code as below:
> > diff --git a/drivers/block/loop.c b/drivers/block/loop.c
> > index 13518ba191f5..c6ba8cf486ce 100644
> > --- a/drivers/block/loop.c
> > +++ b/drivers/block/loop.c
> > @@ -1364,11 +1364,9 @@ loop_set_status(struct loop_device *lo, const
> > struct loop_info64 *info)
> > if (err)
> > goto out_unfreeze;
> >
> > - /* Mask out flags that can't be set using LOOP_SET_STATUS. */
> > - lo->lo_flags &= ~LOOP_SET_STATUS_SETTABLE_FLAGS;
> > - /* For those flags, use the previous values instead */
> > - lo->lo_flags |= prev_lo_flags & ~LOOP_SET_STATUS_SETTABLE_FLAGS;
> > - /* For flags that can't be cleared, use previous values too */
> > + /* Mask out flags that can be set using LOOP_SET_STATUS. */
> > + lo->lo_flags &= LOOP_SET_STATUS_SETTABLE_FLAGS;
> > + /* For flags that can't be cleared, use previous values. */
> > lo->lo_flags |= prev_lo_flags &~LOOP_SET_STATUS_CLEARABLE_FLAGS;
> >
> > Best Regards
> > Yang Xu
> >>
> >> Thanks,
> >> Martijn
> >>
> >>
> >> On Thu, Jun 4, 2020 at 9:10 PM Martijn Coenen <maco@android.com> wrote:
> >>>
> >>> Hi Naresh,
> >>>
> >>> I suspect the loop failures are due to
> >>> faf1d25440d6ad06d509dada4b6fe62fea844370 ("loop: Clean up
> >>> LOOP_SET_STATUS lo_flags handling"), I will investigate and get back
> >>> to you.
> >>>
> >>> Thanks,
> >>> Martijn
> >>>
> >>> On Thu, Jun 4, 2020 at 7:19 PM Naresh Kamboju
> >>> <naresh.kamboju@linaro.org> wrote:
> >>>>
> >>>> + linux-block@vger.kernel.org
> >>>>
> >>>> On Thu, 4 Jun 2020 at 22:47, Naresh Kamboju
> >>>> <naresh.kamboju@linaro.org> wrote:
> >>>>>
> >>>>> Following three test cases reported as regression on Linux mainline
> >>>>> kernel
> >>>>> on x86_64, arm64, arm and i386
> >>>>>
> >>>>> ltp-syscalls-tests:
> >>>>> * ioctl_loop01
> >>>>> * mknod07
> >>>>> * setns01
> >>>>>
> >>>>> git repo:
> >>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
> >>>>> git branch: master
> >>>>> GOOD:
> >>>>> git commit: b23c4771ff62de8ca9b5e4a2d64491b2fb6f8f69
> >>>>> git describe: v5.7-1230-gb23c4771ff62
> >>>>> BAD:
> >>>>> git commit: 1ee08de1e234d95b5b4f866878b72fceb5372904
> >>>>> git describe: v5.7-3523-g1ee08de1e234
> >>>>>
> >>>>> kernel-config:
> >>>>> https://builds.tuxbuild.com/U3bU0dMA62OVHb4DvZIVuw/kernel.config
> >>>>>
> >>>>> We are investigating these failures.
> >>>>>
> >>>>> tst_test.c:906: CONF: btrfs driver not available
> >>>>> tst_test.c:1246: INFO: Timeout per run is 0h 15m 00s
> >>>>> tst_device.c:88: INFO: Found free device 1 '/dev/loop1'
> >>>>> ioctl_loop01.c:49: PASS: /sys/block/loop1/loop/partscan = 0
> >>>>> [ 1073.639677] loop_set_status: loop1 () has still dirty pages
> >>>>> (nrpages=1)
> >>>>> ioctl_loop01.c:50: PASS: /sys/block/loop1/loop/autoclear = 0
> >>>>> ioctl_loop01.c:51: PASS: /sys/block/loop1/loop/backing_file =
> >>>>> '/scratch/ltp-mnIdulzriQ/9cPtLQ/test.img'
> >>>>> ioctl_loop01.c:63: FAIL: expect 12 but got 17
> >>>>> ioctl_loop01.c:67: FAIL: /sys/block/loop1/loop/partscan != 1 got 0
> >>>>> ioctl_loop01.c:68: FAIL: /sys/block/loop1/loop/autoclear != 1 got 0
> >>>>> ioctl_loop01.c:79: FAIL: access /dev/loop1p1 fails
> >>>>> [ 1073.679678] loop_set_status: loop1 () has still dirty pages
> >>>>> (nrpages=1)
> >>>>> ioctl_loop01.c:85: FAIL: access /sys/block/loop1/loop1p1 fails
> >>>>>
> >>>>> HINT: You _MAY_ be missing kernel fixes, see:
> >>>>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=10c70d95c0f2
> >>>>>
> >>>>>
> >>>>> mke2fs 1.43.8 (1-Jan-2018)
> >>>>> [ 1264.711379] EXT4-fs (loop0): mounting ext2 file system using the
> >>>>> ext4 subsystem
> >>>>> [ 1264.716642] EXT4-fs (loop0): mounted filesystem without journal.
> >>>>> Opts: (null)
> >>>>> mknod07 0 TINFO : Using test device LTP_DEV='/dev/loop0'
> >>>>> mknod07 0 TINFO : Formatting /dev/loop0 with ext2 opts=''
> >>>>> extra opts=''
> >>>>> mknod07 1 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=EACCES(13): Permission denied
> >>>>> mknod07 2 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=EACCES(13): Permission denied
> >>>>> mknod07 3 TFAIL : mknod07.c:155: mknod succeeded unexpectedly
> >>>>> mknod07 4 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=EPERM(1): Operation not permitted
> >>>>> mknod07 5 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=EROFS(30): Read-only file system
> >>>>> mknod07 6 TPASS : mknod failed as expected:
> >>>>> TEST_ERRNO=ELOOP(40): Too many levels of symbolic links
> >>>>>
> >>>>>
> >>>>> setns01 0 TINFO : ns_name=ipc, ns_fds[0]=6,
> >>>>> ns_types[0]=0x8000000
> >>>>> setns01 0 TINFO : ns_name=mnt, ns_fds[1]=7, ns_types[1]=0x20000
> >>>>> setns01 0 TINFO : ns_name=net, ns_fds[2]=8,
> >>>>> ns_types[2]=0x40000000
> >>>>> setns01 0 TINFO : ns_name=pid, ns_fds[3]=9,
> >>>>> ns_types[3]=0x20000000
> >>>>> setns01 0 TINFO : ns_name=uts, ns_fds[4]=10,
> >>>>> ns_types[4]=0x4000000
> >>>>> setns01 0 TINFO : setns(-1, 0x8000000)
> >>>>> setns01 1 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(-1, 0x20000)
> >>>>> setns01 2 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(-1, 0x40000000)
> >>>>> setns01 3 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(-1, 0x20000000)
> >>>>> setns01 4 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(-1, 0x4000000)
> >>>>> setns01 5 TPASS : invalid fd exp_errno=9
> >>>>> setns01 0 TINFO : setns(11, 0x8000000)
> >>>>> setns01 6 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>> setns01 0 TINFO : setns(11, 0x20000)
> >>>>> setns01 7 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>> setns01 0 TINFO : setns(11, 0x40000000)
> >>>>> setns01 8 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>> setns01 0 TINFO : setns(11, 0x20000000)
> >>>>> setns01 9 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>> setns01 0 TINFO : setns(11, 0x4000000)
> >>>>> setns01 10 TFAIL : setns01.c:176: regular file fd exp_errno=22:
> >>>>> errno=EBADF(9): Bad file descriptor
> >>>>>
> >>>>> Full test log link,
> >>>>> https://lkft.validation.linaro.org/scheduler/job/1467931#L8047
> >>>>>
> >>>>> test results comparison shows this test case started failing from
> >>>>> June-2-2020
> >>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/ioctl_loop01/history/
> >>>>>
> >>>>>
> >>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/setns01/history/
> >>>>>
> >>>>>
> >>>>> https://qa-reports.linaro.org/lkft/linux-mainline-oe/build/v5.7-4092-g38696e33e2bd/testrun/2779586/suite/ltp-syscalls-tests/test/mknod07/history/
> >>>>>
> >>>>>
> >>>>>
> >>>>> --
> >>>>> Linaro LKFT
> >>>>> https://lkft.linaro.org
> >>
> >>
> >
> >
> >
>
>
More information about the ltp
mailing list