[LTP] [RESENT RFC PATCH 5/5] st_net.sh: tst_rhost_run: Add -d option (debug)

Xiao Yang yangx.jy@cn.fujitsu.com
Tue Jun 23 07:52:12 CEST 2020


On 2020/6/22 15:09, Petr Vorel wrote:
> From: Petr Vorel <pvorel@suse.cz>
>
> -d debug mode (print command and netns/ssh handling into stderr)
>
> Add tst_net_debug() simple helper for printing into stderr.
>
> Also use new parameter in tst_rhost_run.sh.
>
> Signed-off-by: Petr Vorel <pvorel@suse.cz>
> ---
> Hi,
>
> RFC: I use it quite a lot, but not sure if needed.
>
> Probably using $TST_NET_DEBUG instead of -d would be better.
Hi Petr,

Agreed. $TST_NET_DEBUG is better for user to print debug info because we
don't need to change code(i.e. pass -d to tst_rhost_run()).
Debug info is only related to tst_rhost_run() so is $TST_RHOST_RUN_DEBUG
meaningful?
> If we merge "tst_test.sh: Print tst_{res, brk} into stdout" [1],
> simple tst_res_ could be used. I was also thinking about adding new flag
> "DEBUG", but that's probably not needed.
I think tst_res TINFO is enough. :-)

Thanks,
Xiao Yang
> Kind regards,
> Petr
>
> [1] https://patchwork.ozlabs.org/project/ltp/patch/20200619192542.20113-1-pvorel@suse.cz/
>
>  lib/newlib_tests/shell/net/tst_rhost_run.sh |  8 +++---
>  testcases/lib/tst_net.sh                    | 29 ++++++++++++++++-----
>  2 files changed, 27 insertions(+), 10 deletions(-)
>
> diff --git a/lib/newlib_tests/shell/net/tst_rhost_run.sh b/lib/newlib_tests/shell/net/tst_rhost_run.sh
> index 4c034a4ac..ebcd4ca03 100755
> --- a/lib/newlib_tests/shell/net/tst_rhost_run.sh
> +++ b/lib/newlib_tests/shell/net/tst_rhost_run.sh
> @@ -10,14 +10,14 @@ do_test()
>  {
>  	local file="/etc/fstab"
>  
> -	tst_rhost_run -c 'which grep > /dev/null' || \
> +	tst_rhost_run -d -c 'which grep > /dev/null' || \
>  		tst_res TCONF "grep not found on rhost"
>  
> -	tst_rhost_run -c "[ -f $file ]" || \
> +	tst_rhost_run -d -c "[ -f $file ]" || \
>  		tst_res TCONF "$file not found on rhost"
>  
> -	tst_rhost_run -s -c "grep -q \"[^ ]\" $file"
> -	tst_rhost_run -s -c "grep -q '[^ ]' $file"
> +	tst_rhost_run -ds -c "grep -q \"[^ ]\" $file"
> +	tst_rhost_run -ds -c "grep -q '[^ ]' $file"
>  
>  	tst_res TPASS "tst_rhost_run is working"
>  }
> diff --git a/testcases/lib/tst_net.sh b/testcases/lib/tst_net.sh
> index 2ed570a6b..d6845618d 100644
> --- a/testcases/lib/tst_net.sh
> +++ b/testcases/lib/tst_net.sh
> @@ -130,11 +130,17 @@ init_ltp_netspace()
>  	tst_restore_ipaddr rhost
>  }
>  
> +tst_net_debug()
> +{
> +	echo "DEBUG: $@" >&2
> +}
> +
>  # Run command on remote host.
>  # tst_rhost_run -c CMD [-b] [-s] [-u USER]
>  # Options:
>  # -b run in background
>  # -c CMD specify command to run (this must be binary, not shell builtin/function)
> +# -d debug mode (print command and netns/ssh handling into stderr)
>  # -s safe option, if something goes wrong, will exit with TBROK
>  # -u USER for ssh (default root)
>  # RETURN: 0 on success, 1 on failure
> @@ -143,16 +149,17 @@ tst_rhost_run()
>  	local post_cmd=' || echo RTERR'
>  	local user="root"
>  	local ret=0
> -	local cmd out output pre_cmd safe
> +	local cmd debug out output pre_cmd rcmd sh_cmd safe use
>  
>  	local OPTIND
> -	while getopts :bsc:u: opt; do
> +	while getopts :bc:dsu: opt; do
>  		case "$opt" in
>  		b) [ "${TST_USE_NETNS:-}" ] && pre_cmd= || pre_cmd="nohup"
>  		   post_cmd=" > /dev/null 2>&1 &"
>  		   out="1> /dev/null"
>  		;;
>  		c) cmd="$OPTARG" ;;
> +		d) debug=1 ;;
>  		s) safe=1 ;;
>  		u) user="$OPTARG" ;;
>  		*) tst_brk_ TBROK "tst_rhost_run: unknown option: $OPTARG" ;;
> @@ -166,14 +173,24 @@ tst_rhost_run()
>  		return 1
>  	fi
>  
> +	sh_cmd="$pre_cmd $cmd $post_cmd"
> +
>  	if [ -n "${TST_USE_NETNS:-}" ]; then
> -		output=$($LTP_NETNS sh -c \
> -			"$pre_cmd $cmd $post_cmd" $out 2>&1 || echo 'RTERR')
> +		use="NETNS"
> +		rcmd="$LTP_NETNS sh -c"
>  	else
>  		tst_require_cmds ssh
> -		output=$(ssh -n -q $user@$RHOST \
> -			"$pre_cmd $cmd $post_cmd" $out 2>&1 || echo 'RTERR')
> +		use="SSH"
> +		rcmd="ssh -n -q $user@$RHOST"
>  	fi
> +
> +	if [ "$debug" ]; then
> +		tst_net_debug "tst_rhost_run: cmd: $cmd"
> +		tst_net_debug "$use: $rcmd \"$sh_cmd\" $out 2>&1"
> +	fi
> +
> +	output=$($rcmd "$sh_cmd" $out 2>&1 || echo 'RTERR')
> +
>  	echo "$output" | grep -q 'RTERR$' && ret=1
>  	if [ $ret -eq 1 ]; then
>  		output=$(echo "$output" | sed 's/RTERR//')





More information about the ltp mailing list