[LTP] [PATCH v3 2/7] can: Add can_common.h for vcan device setup

[Oliver Hartkopp]

Hello Richard,

On 20.01.21 15:37, Richard Palethorpe wrote:
> Note that we call modprobe to set echo=1. However this does seem to be
> necessary for the current tests on 5.10. It has been kept to avoid
> changing the test behavior unnecessarily, but can most likely be
> safely removed if it causes problems.

Without echo=1 a shortcut in af_can.c is used.

I just checked that it works too - but with echo=1 we increase the test 
coverage to a test of the message flow down to the virtual CAN driver vcan.

> 
> Signed-off-by: Richard Palethorpe <rpalethorpe@suse.com>
> ---
>   .../network/can/filter-tests/can_common.h     | 75 +++++++++++++++++++
>   1 file changed, 75 insertions(+)
>   create mode 100644 testcases/network/can/filter-tests/can_common.h
> 
> diff --git a/testcases/network/can/filter-tests/can_common.h b/testcases/network/can/filter-tests/can_common.h
> new file mode 100644
> index 000000000..f15145f30
> --- /dev/null
> +++ b/testcases/network/can/filter-tests/can_common.h
> @@ -0,0 +1,75 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * Copyright (c) 2021 SUSE LLC
> + */
> +
> +#include <stdio.h>
> +#include <stdlib.h>
> +#include <unistd.h>
> +#include <string.h>
> +
> +#include <sys/types.h>
> +#include <sys/socket.h>
> +#include <sys/ioctl.h>
> +#include <sys/time.h>
> +
> +#include "tst_cmd.h"
> +#include "tst_safe_stdio.h"
> +#include "tst_safe_file_ops.h"
> +
> +#include <linux/if.h>
> +#include <linux/can.h>
> +#include <linux/can/raw.h>
> +
> +#ifndef IFF_ECHO
> +# define IFF_ECHO (1<<18)
> +#endif

IFF_ECHO was included into Linux 2.6.25 together with the CAN subsystem 
itself.

So when you run the tests on Kernels < 2.6.25 you don't have CAN support 
and don't need IFF_ECHO too.

Regards,
Oliver

> +
> +static char *can_dev_name;
> +static int can_created_dev;
> +
> +static void can_cmd(const char *const argv[])
> +{
> +	tst_cmd(argv, NULL, NULL, TST_CMD_TCONF_ON_MISSING);
> +}
> +
> +#define CAN_CMD(...) can_cmd((const char *const[]){ __VA_ARGS__, NULL })
> +
> +static void can_setup_vcan(void)
> +{
> +	unsigned int flags;
> +	char *path;
> +
> +	if (can_dev_name)
> +		goto check_echo;
> +
> +	can_dev_name = "vcan0";
> +
> +	tst_res(TINFO, "Creating vcan0 device; use -D option to avoid this");
> +
> +	CAN_CMD("modprobe", "-r", "vcan");
> +	CAN_CMD("modprobe", "vcan", "echo=1");
> +
> +	can_created_dev = 1;
> +
> +	CAN_CMD("ip", "link", "add", "dev", "vcan0", "type", "vcan");
> +	CAN_CMD("ip", "link", "set", "dev", "vcan0", "up");
> +
> +check_echo:
> +	/* Precondition for the frame flow test? */
> +	SAFE_ASPRINTF(&path, "/sys/class/net/%s/flags", can_dev_name);
> +	if (FILE_SCANF(path, "%x", &flags) || !(flags & IFF_ECHO)) {
> +		tst_res(TWARN, "Could not determine if ECHO is set on %s",
> +			can_dev_name);
> +	}
> +}
> +
> +static void can_cleanup_vcan(void)
> +{
> +	if (!can_created_dev)
> +		return;
> +
> +	CAN_CMD("ip", "link", "set", "dev", "vcan0", "down");
> +	CAN_CMD("ip", "link", "del", "dev", "vcan0");
> +	CAN_CMD("modprobe", "-r", "vcan");
> +}
>