[LTP] [RFC PATCH] Hugetlb: Migrating hugetlb tests from libhugetlbfs
Cyril Hrubis
chrubis@suse.cz
Fri Sep 9 11:06:46 CEST 2022
Hi!
> Signed-off-by: Tarun Sahu <tsahu@linux.ibm.com>
> ---
> runtest/hugetlb | 2 +
> testcases/kernel/mem/.gitignore | 1 +
> .../kernel/mem/hugetlb/hugemmap/hugemmap07.c | 106 ++++++++++++++++++
> 3 files changed, 109 insertions(+)
> create mode 100644 testcases/kernel/mem/hugetlb/hugemmap/hugemmap07.c
>
> diff --git a/runtest/hugetlb b/runtest/hugetlb
> index f719217ab..ee02835d3 100644
> --- a/runtest/hugetlb
> +++ b/runtest/hugetlb
> @@ -3,6 +3,8 @@ hugemmap02 hugemmap02
> hugemmap04 hugemmap04
> hugemmap05 hugemmap05
> hugemmap06 hugemmap06
> +hugemmap07 hugemmap07
> +
> hugemmap05_1 hugemmap05 -m
> hugemmap05_2 hugemmap05 -s
> hugemmap05_3 hugemmap05 -s -m
> diff --git a/testcases/kernel/mem/.gitignore b/testcases/kernel/mem/.gitignore
> index ff2910533..df5256ec8 100644
> --- a/testcases/kernel/mem/.gitignore
> +++ b/testcases/kernel/mem/.gitignore
> @@ -4,6 +4,7 @@
> /hugetlb/hugemmap/hugemmap04
> /hugetlb/hugemmap/hugemmap05
> /hugetlb/hugemmap/hugemmap06
> +/hugetlb/hugemmap/hugemmap07
> /hugetlb/hugeshmat/hugeshmat01
> /hugetlb/hugeshmat/hugeshmat02
> /hugetlb/hugeshmat/hugeshmat03
> diff --git a/testcases/kernel/mem/hugetlb/hugemmap/hugemmap07.c b/testcases/kernel/mem/hugetlb/hugemmap/hugemmap07.c
> new file mode 100644
> index 000000000..798735ed0
> --- /dev/null
> +++ b/testcases/kernel/mem/hugetlb/hugemmap/hugemmap07.c
> @@ -0,0 +1,106 @@
> +/*
> + * License/Copyright Details
> + */
There should be a SPDX licence identifier here instead.
Also testcase should include a special ascii-doc formatted comment here
that describes the purpose of the test.
> +#define _GNU_SOURCE
> +#include <stdio.h>
> +#include <sys/mount.h>
> +#include <limits.h>
> +#include <sys/param.h>
> +#include <sys/types.h>
> +
> +#include "tst_test.h"
> +
> +#define P0 "ffffffff"
> +#define IOSZ 4096
> +char buf[IOSZ] __attribute__((aligned(IOSZ)));
> +static int fildes = -1, nfildes = -1;
> +static char TEMPFILE[MAXPATHLEN];
> +static char NTEMPFILE[MAXPATHLEN];
Uppercase is reserved for macros in C.
Have you run 'make check' to check for common mistakes before
submitting?
> +void test_directio(void)
should be static
> +{
> + long hpage_size;
> + void *p;
> + int ret;
> +
> + hpage_size = SAFE_READ_MEMINFO("Hugepagesize:");
> +
> + fildes = SAFE_OPEN(TEMPFILE, O_RDWR | O_CREAT, 0600);
> + nfildes = SAFE_OPEN(NTEMPFILE, O_CREAT|O_EXCL|O_RDWR|O_DIRECT, 0600);
I would say that fd and nfd in the original code was were better names,
shorter and to the point. See also:
https://github.com/linux-test-project/ltp/wiki/Test-Writing-Guidelines
> + p = mmap(NULL, hpage_size, PROT_READ|PROT_WRITE, MAP_PRIVATE, fildes, 0);
> + if (p == MAP_FAILED)
> + tst_brk(TFAIL | TERRNO, "mmap() Failed on %s", TEMPFILE);
We do have SAFE_MMAP() as well.
> + memcpy(p, P0, 8);
> +
> + /* Direct write from huge page */
> + ret = write(nfildes, p, IOSZ);
> + if (ret == -1)
> + tst_brk(TFAIL | TERRNO, "Direct-IO write from huge page");
> + if (ret != IOSZ)
> + tst_brk(TFAIL, "Short direct-IO write from huge page");
> + if (lseek(nfildes, 0, SEEK_SET) == -1)
> + tst_brk(TFAIL | TERRNO, "lseek");
> +
> + /* Check for accuracy */
> + ret = read(nfildes, buf, IOSZ);
> + if (ret == -1)
> + tst_brk(TFAIL | TERRNO, "Direct-IO read to normal memory");
> + if (ret != IOSZ)
> + tst_brk(TFAIL, "Short direct-IO read to normal memory");
> + if (memcmp(P0, buf, 8))
> + tst_brk(TFAIL, "Memory mismatch after Direct-IO write");
> + if (lseek(nfildes, 0, SEEK_SET) == -1)
> + tst_brk(TFAIL | TERRNO, "lseek");
And we have SAFE_WRITE(), SAFE_READ(), and SAFE_LSEEK() as well.
Also tst_brk(TFAIL, "") usage is deprecated and should not be used in
new tests.
> + /* Direct read to huge page */
> + memset(p, 0, IOSZ);
> + ret = read(nfildes, p, IOSZ);
> + if (ret == -1)
> + tst_brk(TFAIL | TERRNO, "Direct-IO read to huge page");
> + if (ret != IOSZ)
> + tst_brk(TFAIL, "Short direct-IO read to huge page");
> +
> + /* Check for accuracy */
> + if (memcmp(p, P0, 8))
> + tst_brk(TFAIL, "Memory mismatch after Direct-IO read");
> + tst_res(TPASS, "Successfully tested Hugepage Direct I/O");
You should close filedescriptors and unmap memory here, otherwise the
test will fail with large enough -i parameter.
> +}
> +
> +void setup(void)
should be static.
> +{
> + if (tst_hugepages == 0)
> + tst_brk(TCONF, "Not enough hugepages for testing.");
> +
> + if (!Hopt)
> + Hopt = tst_get_tmpdir();
> + SAFE_MOUNT("none", Hopt, "hugetlbfs", 0, NULL);
> +
> + snprintf(TEMPFILE, sizeof(TEMPFILE), "%s/mmapfile%d", Hopt, getpid());
Ideally all files created outside of the test temporary directory should
be prefixed with "ltp_"
> + snprintf(NTEMPFILE, sizeof(NTEMPFILE), "%s/nmmapfile%d", "/home/", getpid());
Please do not create any files outside of the test temporary directory,
also as the temporary directory is unique already, there is no need to
actually create the second tempfile name like this. All we need to do is
to is something as:
#define NTEMPFILE "tempfile"
> +}
> +
> +void cleanup(void)
> +{
> + close(fildes);
> + close(nfildes);
> + remove(TEMPFILE);
> + remove(NTEMPFILE);
> + umount2(Hopt, MNT_DETACH);
> +}
> +
> +static struct tst_test test = {
> + .needs_root = 1,
> + .needs_tmpdir = 1,
> + .options = (struct tst_option[]) {
> + {"H:", &Hopt, "Location of hugetlbfs, i.e. -H /var/hugetlbfs"},
> + {"s:", &nr_opt, "Set the number of the been allocated hugepages"},
> + {}
> + },
> + .setup = setup,
> + .cleanup = cleanup,
> + .test_all = test_directio,
> + .hugepages = {2, TST_REQUEST},
> +};
> --
> 2.31.1
>
>
> --
> Mailing list info: https://lists.linux.it/listinfo/ltp
--
Cyril Hrubis
chrubis@suse.cz
More information about the ltp
mailing list