[LTP] [RFC PATCH 5/7] testscripts: Remove ltp-scsi_debug.sh
Petr Vorel
pvorel@suse.cz
Mon Oct 16 20:44:06 CEST 2023
Legacy script from 2004, probably not used by anybody.
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
testscripts/ltp-scsi_debug.sh | 218 ----------------------------------
1 file changed, 218 deletions(-)
delete mode 100755 testscripts/ltp-scsi_debug.sh
diff --git a/testscripts/ltp-scsi_debug.sh b/testscripts/ltp-scsi_debug.sh
deleted file mode 100755
index 37853002e..000000000
--- a/testscripts/ltp-scsi_debug.sh
+++ /dev/null
@@ -1,218 +0,0 @@
-#!/bin/bash
-
-# Check if scsi_debug module was built or not
-export kernel=$(uname -r)
-
-ls /lib/modules/$kernel/kernel/drivers/scsi | grep scsi_debug > /dev/null 2>&1
-if [ $? -ne 0 ];
-then
- echo "scsi_debug was not built in the kernel as a module"
- echo "Build scsi_debug as a module first before running the test"
-fi
-
-# Unload scsi_debug moudle if it was already loaded:
-lsmod | grep scsi_debug > /dev/null 2>&1
-if [ $? -eq 0 ];
-then
- echo "The scsi_debug module was already loaded, unload it before test..."
- rmmod -f scsi_debug
-fi
-lsmod | grep scsi_debug > /dev/null 2>&1
-if [ $? -eq 0 ];
-then
- echo "The scsi_debug module was not unloaded - unload error"
-else
- echo "The scsi_debug module was unloaded successfully"
- echo "start testing..."
-fi
-
-orig_count=$(cat /proc/partitions | wc -l)
-
-echo " Load the scsi_debug module..."
-modprobe scsi_debug
-if [ $? -ne 0 ];
-then
- echo "Can't load scsi_debug modules"
- exit
-fi
-
-echo "Check if scsi_debug was loaded..."
-lsmod | grep scsi_debug > /dev/null 2>&1
-if [ $? -eq 0 ];
-then
- echo "scsi_debug module was loaded successfully"
-else
- echo "scsi_debug module was not loaded"
- exit
-fi
-
-
-echo "Remove the scsi_debug device..."
-dev_name=$(ls /proc/scsi/scsi_debug)
-# echo $dev_name
-rm_dev=$dev_name:0:0:0
-# echo $rm_dev
-echo 1 > /sys/class/scsi_device/$rm_dev/device/delete
-
-echo "Check if the scsi_debug device was removed..."
-ls /sys/class/scsi_device | grep $rm_dev > /dev/null 2>&1
-if [ $? -eq 0 ];
-then
- echo "The device was not removed - remove error"
-else
- echo "The device $dev_name was removed successfully"
-fi
-
-echo "Add the device back..."
-echo "0 0 0" > /sys/class/scsi_host/host$dev_name/scan
-ls /sys/class/scsi_device | grep $rm_dev > /dev/null 2>&1
-if [ $? -ne 0 ];
-then
- echo "The device was not added - add device error"
-else
- echo "The device $dev_name was added back successfully"
-fi
-
-echo "Add a new host..."
-echo 1 > /sys/bus/pseudo/drivers/scsi_debug/add_host
-num_host=$(cat /sys/bus/pseudo/drivers/scsi_debug/add_host)
-if [ $num_host -ne 2 ];
-then
- echo "The new host was not added - add host error"
-else
- echo "The new host was added successfully"
-fi
-
-echo "Romove hosts..."
-echo -2 > /sys/bus/pseudo/drivers/scsi_debug/add_host
-num_host=$(cat /sys/bus/pseudo/drivers/scsi_debug/add_host)
-if [ $num_host -ne 0 ];
-then
- echo "The hosts were not removed - remove hosts error"
-else
- echo "The hosts were removed successfully"
-fi
-
-echo "Unload scsi_debug moudle..."
-rmmod -f scsi_debug
-lsmod | grep scsi_debug > /dev/null 2>&1
-if [ $? -eq 0 ];
-then
- echo "The scsi_debug module was not unloaded - unload error"
-else
- echo "The scsi_debug module was unloaded successfully"
-fi
-
-echo "Load scsi_debug with multiple hosts..."
-modprobe scsi_debug max_luns=2 num_tgts=2 add_host=2 dev_size_mb=20
-lsmod | grep scsi_debug > /dev/null 2>&1
-if [ $? -eq 0 ];
-then
- echo "The multiple scsi_debug modules were loaded successfully"
-else
- echo "The multiple scsi_debug modules were not loaded - load error"
-fi
-
-echo "Check if modules were loaded as required by premeters..."
-max_luns=$(cat /sys/bus/pseudo/drivers/scsi_debug/max_luns)
-add_host=$(cat /sys/bus/pseudo/drivers/scsi_debug/add_host)
-num_tgts=$(cat /sys/bus/pseudo/drivers/scsi_debug/num_tgts)
-# echo "max_lunx is $max_luns"
-# echo "add_host is $add_host"
-# echo "num_tgts is $num_tgts"
-
-premeter_err_ct=0;
-
-if [ $max_luns -ne 2 ];
-then
- echo "max_luns was not correct"
- premeter_err_ct=$premeter_err_ct+1;
-fi
-if [ $add_host -ne 2 ];
-then
- echo "add_host was not correct"
- premeter_err_ct=$premeter_err_ct+1;
-fi
-if [ $num_tgts -ne 2 ];
-then
- echo "num_tgts was not correct"
- premeter_err_ct=$premeter_err_ct+1;
-fi
-if [ $premeter_err_ct -eq 0 ];
-then
- echo "multiple scsi_debug was loaded as required premeters"
-else
- echo "multip.e scsi_debug was not loaded as required premeters"
-fi
-echo "scsi_debug first part of test has been done."
-
-echo "Now we are doing fs test for scsi_debug driver..."
-
-cd `dirname $0`
-export LTPROOT=${PWD}
-echo $LTPROOT | grep testscripts > /dev/null 2>&1
-if [ $? -eq 0 ]; then
- cd ..
- export LTPROOT=${PWD}
-fi
-
-export TMPBASE="/tmp"
-
-# check if the newly created scsi_debug partitions are in /proc/partitions file
-check_count=$(cat /proc/partitions | wc -l)
-save_count=$(( $check_count - $orig_count ))
-if [ $save_count -lt 4 ]; then
- echo "Not enough scsi_debug partitions to run the test"
- exit
-fi
-
-# Get the 4 partitions created by scsi_debug for testing
-cat /proc/partitions | awk '{print $4}' | tail -n 4 > $TMPBASE/partition-test
-echo "The 4 partitions used to run the test are:"
-part1=$(cat $TMPBASE/partition-test | tail -n 1)
-echo $part1
-part2=$(cat $TMPBASE/partition-test | head -n 3 | tail -n 1)
-echo $part2
-part3=$(cat $TMPBASE/partition-test | head -n 2 | tail -n 1)
-echo $part3
-part4=$(cat $TMPBASE/partition-test | head -n 1)
-echo $part4
-
-export PATH="${PATH}:${LTPROOT}/testcases/bin"
-
-mkdir /test >/dev/null 2>&1
-mkdir /test/growfiles >/dev/null 2>&1
-mkdir /test/growfiles/ext2 >/dev/null 2>&1
-mkdir /test/growfiles/ext3 >/dev/null 2>&1
-mkdir /test/growfiles/reiser >/dev/null 2>&1
-mkdir /test/growfiles/msdos >/dev/null 2>&1
-
-echo "----- make ext3 fs -----"
-mkfs -V -t ext3 /dev/$part1
-echo "----- make ext2 fs -----"
-mkfs -V -t ext2 /dev/$part2
-echo "----- make reiserfs fs -----"
-mkreiserfs -f /dev/$part3
-echo "----- make msdos fs -----"
-mkfs -V -t msdos -I /dev/$part4
-
-echo "----- Mount partitions -----"
-mount /dev/$part1 /test/growfiles/ext3
-mount /dev/$part2 /test/growfiles/ext2
-mount /dev/$part3 /test/growfiles/reiser
-mount /dev/$part4 /test/growfiles/msdos
-
-echo "----- Running tests ----- "
-echo "The test may take about 2 hours to finish..."
-sort -R ${LTPROOT}/runtest/scsi_debug.part1 -o ${TMPBASE}/scsi_debug
-
-${LTPROOT}/bin/ltp-pan -e -S -a scsi_debug -n scsi_debug -l ${TMPBASE}/fs-scsi_debug.log -o ${TMPBASE}/fs-scsi_debug.out -f ${TMPBASE}/scsi_debug
-
-wait $!
-
-umount -v /dev/$part1
-umount -v /dev/$part2
-umount -v /dev/$part3
-umount -v /dev/$part4
-
-echo "Look into /tmp/fs-scsi_debug.log and /tmp/fs-scsi_debug.out for detail results..."
--
2.42.0
More information about the ltp
mailing list