[LTP] arm64: Unable to handle kernel execute from non-executable memory at virtual address ffff8000834c13a0
Mark Rutland
mark.rutland@arm.com
Wed Sep 20 16:32:47 CEST 2023
Hi Naresh,
On Wed, Sep 20, 2023 at 11:29:12AM +0200, Naresh Kamboju wrote:
> [ my two cents ]
> While running LTP pty07 test cases on arm64 juno-r2 with Linux next-20230919
> the following kernel crash was noticed.
>
> I have been noticing this issue intermittently on Juno-r2 for more than a month.
> Anyone have noticed this crash ?
How intermittent is this? 1/2, 1/10, 1/100, rarer still?
Are you running *just* the pty07 test, or are you running a whole LTP suite and
the issue first occurs around pty07?
Given you've been hitting this for a month, have you tried testing mainline? Do
you have a known-good kernel that we can start a bisect from?
Do you *only* see this on Juno-r2 and are you testing on other hardware?
> Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
>
> [ 0.000000] Linux version 6.6.0-rc2-next-20230919 (tuxmake@tuxmake)
> (aarch64-linux-gnu-gcc (Debian 13.2.0-2) 13.2.0, GNU ld (GNU Binutils
> for Debian) 2.41) #1 SMP PREEMPT @1695107157
> [ 0.000000] KASLR disabled due to lack of seed
> [ 0.000000] Machine model: ARM Juno development board (r2)
> ...
> LTP running pty
> ...
>
> pty07.c:92: TINFO: Saving active console 1
> ../../../include/tst_fuzzy_sync.h:640: TINFO: Stopped sampling at 552
> (out of 1024) samples, sampling time reached 50% of the total time
> limit
> ../../../include/tst_fuzzy_sync.h:307: TINFO: loop = 552, delay_bias = 0
> ../../../include/tst_fuzzy_sync.h:295: TINFO: start_a - start_b: { avg
> = 127ns, avg_dev = 84ns, dev_ratio = 0.66 }
> ../../../include/tst_fuzzy_sync.h:295: TINFO: end_a - start_a : { avg
> = 17296156ns, avg_dev = 5155058ns, dev_ratio = 0.30 }
> ../../../include/tst_fuzzy_sync.h:295: TINFO: end_b - start_b : { avg
> = 101202336ns, avg_dev = 6689286ns, dev_ratio = 0.07 }
> ../../../include/tst_fuzzy_sync.h:295: TINFO: end_a - end_b : { avg
> = -83906064ns, avg_dev = 10230694ns, dev_ratio = 0.12 }
> ../../../include/tst_fuzzy_sync.h:295: TINFO: spins : { avg
> = 2765565 , avg_dev = 339285 , dev_ratio = 0.12 }
> [ 384.133538] Unable to handle kernel execute from non-executable
> memory at virtual address ffff8000834c13a0
> [ 384.133559] Mem abort info:
> [ 384.133568] ESR = 0x000000008600000f
> [ 384.133578] EC = 0x21: IABT (current EL), IL = 32 bits
> [ 384.133590] SET = 0, FnV = 0
> [ 384.133600] EA = 0, S1PTW = 0
> [ 384.133610] FSC = 0x0f: level 3 permission fault
> [ 384.133621] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000082375000
> [ 384.133634] [ffff8000834c13a0] pgd=10000009fffff003,
> p4d=10000009fffff003, pud=10000009ffffe003, pmd=10000009ffff8003,
> pte=00780000836c1703
> [ 384.133697] Internal error: Oops: 000000008600000f [#1] PREEMPT SMP
> [ 384.133707] Modules linked in: tda998x onboard_usb_hub cec hdlcd
> crct10dif_ce drm_dma_helper drm_kms_helper fuse drm backlight dm_mod
> ip_tables x_tables
> [ 384.133767] CPU: 3 PID: 589 Comm: (udev-worker) Not tainted
> 6.6.0-rc2-next-20230919 #1
> [ 384.133779] Hardware name: ARM Juno development board (r2) (DT)
> [ 384.133784] pstate: 40000005 (nZcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
> [ 384.133796] pc : in_lookup_hashtable+0x178/0x2000
This indicates that the faulting address ffff8000834c13a0 is
in_lookup_hashtable+0x178/0x2000, which would been we've somehow marked the
kernel text as non-executable, which we never do intentionally.
I suspect that implies memory corruption. Have you tried running this with
KASAN enabled?
> [ 384.133818] lr : rcu_core (arch/arm64/include/asm/preempt.h:13
> (discriminator 1) kernel/rcu/tree.c:2146 (discriminator 1)
> kernel/rcu/tree.c:2403 (discriminator 1))
> [ 384.133832] sp : ffff800083533e60
> [ 384.133836] x29: ffff800083533e60 x28: ffff0008008a6180 x27: 000000000000000a
> [ 384.133854] x26: 0000000000000000 x25: 0000000000000000 x24: ffff800083533f10
> [ 384.133871] x23: ffff800082404008 x22: ffff800082ebea80 x21: ffff800082f55940
> [ 384.133889] x20: ffff00097ed75440 x19: 0000000000000001 x18: 0000000000000000
> [ 384.133905] x17: ffff8008fc95c000 x16: ffff800083530000 x15: 00003d0900000000
> [ 384.133922] x14: 0000000000030d40 x13: 0000000000000000 x12: 003d090000000000
> [ 384.133939] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff80008015b05c
> [ 384.133955] x8 : ffff800083533da8 x7 : 0000000000000000 x6 : 0000000000000100
> [ 384.133971] x5 : ffff800082ebf000 x4 : ffff800082ebf2e8 x3 : 0000000000000000
> [ 384.133987] x2 : ffff000825bf8618 x1 : ffff8000834c13a0 x0 : ffff00082b6d7170
> [ 384.134005] Call trace:
> [ 384.134009] in_lookup_hashtable+0x178/0x2000
> [ 384.134022] rcu_core_si (kernel/rcu/tree.c:2421)
> [ 384.134035] __do_softirq (arch/arm64/include/asm/jump_label.h:21
> include/linux/jump_label.h:207 include/trace/events/irq.h:142
> kernel/softirq.c:554)
> [ 384.134046] ____do_softirq (arch/arm64/kernel/irq.c:81)
> [ 384.134058] call_on_irq_stack (arch/arm64/kernel/entry.S:888)
> [ 384.134070] do_softirq_own_stack (arch/arm64/kernel/irq.c:86)
> [ 384.134082] irq_exit_rcu (arch/arm64/include/asm/percpu.h:44
> kernel/softirq.c:612 kernel/softirq.c:634 kernel/softirq.c:644)
> [ 384.134094] el0_interrupt (arch/arm64/include/asm/daifflags.h:28
> arch/arm64/kernel/entry-common.c:133
> arch/arm64/kernel/entry-common.c:144
> arch/arm64/kernel/entry-common.c:763)
> [ 384.134110] __el0_irq_handler_common (arch/arm64/kernel/entry-common.c:769)
> [ 384.134124] el0t_64_irq_handler (arch/arm64/kernel/entry-common.c:774)
> [ 384.134137] el0t_64_irq (arch/arm64/kernel/entry.S:592)
> [ 384.134153] Code: 00000000 00000000 00000000 00000000 (2b6d7170)
> All code
> ========
> ...
> 10: 70 71 jo 0x83
> 12: 6d insl (%dx),%es:(%rdi)
> 13: 2b .byte 0x2b
>
> Code starting with the faulting instruction
> ===========================================
> 0: 70 71 jo 0x73
> 2: 6d insl (%dx),%es:(%rdi)
> 3: 2b .byte 0x2b
As a general thing, can you *please* fix this code dump to decode arm64 as
arm64?
Given the instructions before this are all UDF #0, I suspect the page table
entry has been corrupted and this is pointing at entirely the wrong page.
Thanks,
Mark.
> [ 384.134161] ---[ end trace 0000000000000000 ]---
> [ 384.134168] Kernel panic - not syncing: Oops: Fatal exception in interrupt
> [ 384.134173] SMP: stopping secondary CPUs
> [ 384.134184] Kernel Offset: disabled
> [ 384.134187] CPU features: 0x8000020c,3c020000,0000421b
> [ 384.134194] Memory Limit: none
>
> Links:
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230919/testrun/20054202/suite/log-parser-test/tests/
> - https://qa-reports.linaro.org/lkft/linux-next-master/build/next-20230919/testrun/20054202/suite/log-parser-test/test/check-kernel-oops/log
> - https://storage.tuxsuite.com/public/linaro/lkft/builds/2VbZdpWwncUx8oSxsSXCWV3N5DH/
> - https://lkft.validation.linaro.org/scheduler/job/6666807#L2461
>
> --
> Linaro LKFT
> https://lkft.linaro.org
More information about the ltp
mailing list