[LTP] [PATCH v4] thermal: add new test group
Piotr Kubaj
piotr.kubaj@intel.com
Mon Nov 24 11:51:22 CET 2025
This is a new test for checking thermal interrupt events.
stress-ng is used because genload doesn't seem to generate enough load.
In particular, this version replaces use of tr and cut where awk is
already used.
Signed-off-by: Piotr Kubaj <piotr.kubaj@intel.com>
---
runtest/thermal | 3 +
scenario_groups/default | 1 +
testcases/kernel/Makefile | 1 +
testcases/kernel/thermal/Makefile | 11 +++
testcases/kernel/thermal/thermal01.sh | 100 ++++++++++++++++++++++++++
5 files changed, 116 insertions(+)
create mode 100644 runtest/thermal
create mode 100644 testcases/kernel/thermal/Makefile
create mode 100755 testcases/kernel/thermal/thermal01.sh
diff --git a/runtest/thermal b/runtest/thermal
new file mode 100644
index 000000000..823d422da
--- /dev/null
+++ b/runtest/thermal
@@ -0,0 +1,3 @@
+# Thermal driver API
+# https://docs.kernel.org/driver-api/thermal/
+thermal_interrupt_events thermal01.sh
diff --git a/scenario_groups/default b/scenario_groups/default
index 0e76b2bee..ffdd7ff25 100644
--- a/scenario_groups/default
+++ b/scenario_groups/default
@@ -26,3 +26,4 @@ crypto
kernel_misc
uevent
watchqueue
+thermal
diff --git a/testcases/kernel/Makefile b/testcases/kernel/Makefile
index 98fd45a9d..ac816e4e8 100644
--- a/testcases/kernel/Makefile
+++ b/testcases/kernel/Makefile
@@ -36,6 +36,7 @@ SUBDIRS += connectors \
sched \
security \
sound \
+ thermal \
tracing \
uevents \
watchqueue \
diff --git a/testcases/kernel/thermal/Makefile b/testcases/kernel/thermal/Makefile
new file mode 100644
index 000000000..edd338605
--- /dev/null
+++ b/testcases/kernel/thermal/Makefile
@@ -0,0 +1,11 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (c) 2025, Intel Corporation. All rights reserved.
+# Author:Piotr Kubaj <piotr.kubaj@intel.com>
+
+top_srcdir ?= ../../..
+
+include $(top_srcdir)/include/mk/env_pre.mk
+
+INSTALL_TARGETS := *.sh
+
+include $(top_srcdir)/include/mk/generic_leaf_target.mk
diff --git a/testcases/kernel/thermal/thermal01.sh b/testcases/kernel/thermal/thermal01.sh
new file mode 100755
index 000000000..95adaf04b
--- /dev/null
+++ b/testcases/kernel/thermal/thermal01.sh
@@ -0,0 +1,100 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0-or-later
+# Copyright (C) 2025 Intel - http://www.intel.com/
+#
+# ---
+# doc
+# Tests the CPU package thermal sensor interface for Intel platforms.
+#
+# It works by checking the initial count of thermal interrupts. Then it
+# decreases the threshold for sending a thermal interrupt to just above
+# the current temperature and runs a workload on the CPU. Finally, it restores
+# the original thermal threshold and checks whether the number of thermal
+# interrupts increased.
+# ---
+#
+# ---
+# env
+# {
+# "needs_root": true,
+# "supported_archs": ["x86", "x86_64"],
+# "needs_cmds": ["stress-ng"],
+# "min_runtime": 180
+# }
+# ---
+
+. tst_loader.sh
+
+tst_test()
+{
+ local thermal_zone_numbers=""
+ local temp
+ local temp_high=""
+ local status=0
+
+ local interrupt_array_init=$(awk -F'[^0-9]*' '/Thermal event interrupts/ {$1=$1;print}' /proc/interrupts)
+ if [ $? -eq 0 ]; then
+ tst_res TDEBUG "Initial values of thermal interrupt counters: $interrupt_array_init"
+ local num=$(tst_getconf _NPROCESSORS_ONLN)
+ tst_res TDEBUG "Number of logical cores: $num"
+ else
+ tst_brk TCONF "Thermal event interrupts is not found"
+ fi
+
+ # Below we check for the thermal_zone which uses x86_pkg_temp driver
+ local thermal_zone_numbers=$(grep -l x86_pkg_temp /sys/class/thermal/thermal_zone*/type | xargs dirname)
+ tst_res TINFO "x86_pkg_temp thermal zones: $thermal_zone_numbers"
+
+ if [ -z $thermal_zone_numbers ]; then
+ tst_brk TCONF "No x86_pkg_temp thermal zones found"
+ fi
+ for i in $thermal_zone_numbers; do
+ tst_res TINFO "Currently testing x86_pkg_temp $i"
+ local TEMP="$i/temp"
+ local temp=$(cat "$TEMP")
+ tst_res TDEBUG "$i's current temperature is $temp"
+ case $temp in
+ [0-9]*) ;;
+ *)
+ tst_brk TBROK "Unexpected zone temperature value $temp";;
+ esac
+ local trip=$(cat $i/trip_point_1_temp)
+ # Setting trip_point_1_temp for $i to $temp + 10 (0.001°C)
+ local temp_high=$(( temp + 10 ))
+ echo "$temp_high" > $i/trip_point_1_temp
+ local run_time=30
+ local sleep_time=10
+ while [ $sleep_time -gt 0 ]; do
+ ROD stress-ng --matrix 0 --timeout $run_time --quiet
+ local temp_cur=$(cat "$TEMP")
+ tst_res TDEBUG "temp_cur: $temp_cur"
+ [ $temp_cur -gt $temp_high ] && break
+ tst_sleep $sleep_time
+ run_time=$(( run_time - 3 ))
+ sleep_time=$(( sleep_time - 1 ))
+ done
+ [ $temp_cur -gt $temp_high ] || tst_res TFAIL "Zone temperature is not rising as expected"
+
+ # Restore the original trip_point_1_temp value
+ echo "$trip" > $i/trip_point_1_temp
+
+ # Check whether thermal interrupts count actually increased
+ local interrupt_array_later=$(awk -F'[^0-9]*' '/Thermal event interrupts/ {$1=$1;print}' /proc/interrupts)
+ tst_res TDEBUG "Current values of thermal interrupt counters: $interrupt_array_later"
+ for j in $(seq 1 "$num"); do
+ local interrupt_later=$(echo "$interrupt_array_later" | awk -v j=$j '{print $j}')
+ local interrupt_init=$(echo "$interrupt_array_init" | awk -v j=$j '{print $j}')
+ if [ $interrupt_later -le $interrupt_init ]; then
+ status=1
+ fi
+ done
+ done
+
+ if [ $status -eq 0 ]; then
+ tst_res TPASS "x86 package thermal interrupt triggered"
+ else
+ tst_res TFAIL "x86 package thermal interrupt did not trigger"
+ fi
+}
+
+. tst_run.sh
--
2.47.3
---------------------------------------------------------------------
Intel Technology Poland sp. z o.o.
ul. Slowackiego 173 | 80-298 Gdansk | Sad Rejonowy Gdansk Polnoc | VII Wydzial Gospodarczy Krajowego Rejestru Sadowego - KRS 101882 | NIP 957-07-52-316 | Kapital zakladowy 200.000 PLN.
Spolka oswiadcza, ze posiada status duzego przedsiebiorcy w rozumieniu ustawy z dnia 8 marca 2013 r. o przeciwdzialaniu nadmiernym opoznieniom w transakcjach handlowych.
Ta wiadomosc wraz z zalacznikami jest przeznaczona dla okreslonego adresata i moze zawierac informacje poufne. W razie przypadkowego otrzymania tej wiadomosci, prosimy o powiadomienie nadawcy oraz trwale jej usuniecie; jakiekolwiek przegladanie lub rozpowszechnianie jest zabronione.
This e-mail and any attachments may contain confidential material for the sole use of the intended recipient(s). If you are not the intended recipient, please contact the sender and delete all copies; any review or distribution by others is strictly prohibited.
More information about the ltp
mailing list