[Primipassi] Scusate per la poca chiarezza (sempre a proposito di Lilo)

[Vanni Guarnieri]

> On Mon, Mar 12, 2001 at 04:38:27PM +0100, Manuel Toniato wrote:
>
> > Io ho la partizione di linux sull'hd master del secondo canale ide (hdc).
> > Questo hd è rimovibile e quindi a volte capita di non avere l'hd
> > disponibile. In questo caso lilo mi scrive
> >
> > L 04 04 04 04 04 04 04 ...
>


dalla documentazione di LILO:

 L <error> ...   The first stage boot loader has been loaded and started,
    but it can't load the second stage boot loader. The two-digit error
    codes indicate the type of problem. (See also section "Disk error
    codes".) This condition usually indicates a media failure or a
geometry
    mismatch (e.g. bad disk parameters, see section "Disk geometry").

<omissis>

Disk error codes
- - - - - - - -

If the BIOS signals an error when LILO is trying to load a boot image, the
respective error code is displayed. The following BIOS error codes are
known:

0x04   "Sector not found". This typically indicates a geometry mismatch.
    If you're booting a raw-written disk image, verify whether it was
    created for disks with the same geometry as the one you're using. If
    you're booting from a SCSI disk or a large IDE disk, you should check,
    whether LILO has obtained correct geometry data from the kernel or
    whether the geometry definition corresponds to the real disk geometry.
    (See section "Disk geometry".) Removing COMPACT may help too. So may
    adding LINEAR.

oltre a questo, imho, non e' un granche' mettere il sistema su un disco
rimovibile, forse puoi studiare una configurazione migliore...

ciao,
	vanni