[Primipassi] configurazione merlin g201

[simone]

Stavolta ho cercato dappertutto,ma niente non riesco a farla connettere.
SCHEDA merlin g201
OS Debian Sarge Kernel 2.6.8
windows manager gnomeho provato con ppp kppp ma niente, quando inserisco
la scheda diventaverde la lucetta, ma non riesco a farla connettere.come
stringa AT gli passo questo +CGDCONT=1,"IP","ibox.tin.it" ma poi vain
rosso il led come se non trovasse la linea ma non dice nulla.

un altro problema che non riesco a risolvere è con kismet, scheda cisco
340 ma quando lo lancio mi butta fuori.
ho provato a inserire in source=cisco,eth1,ciscosource ma nulla anche
cambiando con wifi0 niente.

incolo a seguito parte del kismet.conf

# Version of Kismet config
version=2005.01.R1a

# Name of server (Purely for organiational purposes)
servername=Kismet

# User to setid to (should be your normal user)
#suiduser=your_user_here

# Sources are defined as:
# source=sourcetype,interface,name[,initialchannel]
# Source types and required drivers are listed in the README.
# The initial channel is optional, if hopping is not enabled it can be used
# to set the channel the interface listens on.
# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE
source=cisco,wifi0,ciscosource

# Comma-separated list of sources to enable.  This is only needed if you
defined
# multiple sources and only want to enable some of them.  By default,
all defined
# sources are enabled.
# For example:
# enablesources=prismsource,ciscosource

# Do we channelhop?
channelhop=true

# How many channels per second do we hop?  (1-10)
channelvelocity=5

# By setting the dwell time for channel hopping we override the
channelvelocity
# setting above and dwell on each channel for the given number of seconds.
#channeldwell=10

# Do we split channels between cards on the same spectrum?  This means if
# multiple 802.11b capture sources are defined, they will be offset to cover
# the most possible spectrum at a given time.  This also controls splitting
# fine-tuned sourcechannels lines which cover multiple interfaces (see
below)
channelsplit=true

# Basic channel hopping control:
# These define the channels the cards hop through for various frequency
ranges
# supported by Kismet.   More finegrain control is available via the
# "sourcechannels" configuration option.
#
# Don't change the IEEE80211<x> identifiers or channel hopping won't work.

non so proprio come fare, si su goggle ho cercato, ma ne ho provate tre
di soluzioni e nulla, non posso mica metteremi a provare tutte quelle
che trovo, purtroppo lo ammetto non sono granche nelle ricerche e
sicuramente sbaglio qualcosa.

se qualcuno ha piu esperienza di me grazie del aiuto.

Saluti buona giornata.