[Primipassi] problema con USB aggiornamento

simone simone@cyberblackcat.net
Dom 25 Set 2005 13:38:23 CEST


Leandro Noferini wrote:
> Il giorno sab, 24/09/2005 alle 15.53 +0200, simone ha scritto:
> 
> 
>>non riesco piu a montare la chiave USB cosa puo essere successo mi
>>daice no media mount.
>>
>>Qualcuno puo aiutarmi?
> 
> 
> tail -f /var/log/syslog mentre inserisci la chiave.
> 
Ho modificato /etc/X11/XF86Config-4
prima avevo un mouse usb,e ora ho collegato uno ps2,e gli ho abilitato
la rotella centrale.

la sola modifica che ho fatto e questa:
Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"

ora non mi monta piu la chiave,
Risultato di tail -f /var/log/syslog

Sep 25 13:31:10 localhost kernel: ohci_hcd 0000:00:03.1: wakeup
Sep 25 13:31:10 localhost kernel: usb 2-1: new full speed USB device
using address 3
Sep 25 13:31:10 localhost kernel: scsi3 : SCSI emulation for USB Mass
Storage devices
Sep 25 13:31:10 localhost kernel:   Vendor: SanDisk   Model: Cruzer
Titanium   Rev: 2000
Sep 25 13:31:10 localhost kernel:   Type:   Direct-Access
       ANSI SCSI revision: 02
Sep 25 13:31:10 localhost kernel: SCSI device sdb: 1014784 512-byte hdwr
sectors (520 MB)
Sep 25 13:31:10 localhost kernel: sdb: assuming Write Enabled
Sep 25 13:31:10 localhost kernel: sdb: assuming drive cache: write through
Sep 25 13:31:10 localhost kernel:  /dev/scsi/host3/bus0/target0/lun0: p1
Sep 25 13:31:10 localhost kernel: Attached scsi removable disk sdb at
scsi3, channel 0, id 0, lun 0
Sep 25 13:31:10 localhost kernel: Attached scsi generic sg1 at scsi3,
channel 0, id 0, lun 0,  type 0
Sep 25 13:31:10 localhost kernel: USB Mass Storage device found at 3
Sep 25 13:31:11 localhost usbmgr[908]: vendor:0x781 product:0x7108
Sep 25 13:31:11 localhost usbmgr[908]: class:0x8 subclass:0x6 protocol:0x50
Sep 25 13:31:11 localhost usbmgr[908]: USB device is matched the
configuration
Sep 25 13:31:11 localhost usbmgr[908]: "scsi_mod" was loaded
Sep 25 13:31:11 localhost usbmgr[908]: "sd_mod" was loaded
Sep 25 13:31:11 localhost usbmgr[908]: "usb-storage" was loaded





Maggiori informazioni sulla lista primipassi