[bglug] SuSE 8.2 - problemi con hard disk e RAID hardware.

[piankhy]

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Dopo un lungo periodo di assenza torno "tra i vivi"...... ci vediamo giovedì 
prossimo se la sede è aperta.
Vengo ai problemi che mi fanno disperare da un pò di tempo : 
1) ho preso un nuovo pc con 4 hd (che sono intenzionato a mettere in RAID 0+1) 
di cui 2 sono visti in fase di boot e gli altri 2 no.
[cut]
hda: Maxtor 6Y120L0, ATA DISK drive
hdb: Maxtor 6Y120L0, ATA DISK drive
hdc: HL-DT-ST DVDRAM GMA-4020B, ATAPI CD/DVD-ROM drive
hdd: ATAPI DVD-ROM 16X Maximum, ATAPI CD/DVD-ROM drive
hde: no response (status = 0xfe)
hdg: no response (status = 0xfe)
[cut]
2) Inoltre sui 2 hd che sono rilevati in fase di boot compaiono errori 
relativi alla cache del disco 
[cut]
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 > [cut...]
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,7)) for (ide0(3,7))
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
hda: cache flushing failed. disable write back cacheing for journalled file 
systems [cut....]
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,72)) for (ide0(3,72))
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
hdb: cache flushing failed. disable write back cacheing for journalled file 
systems
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
hdb: cache flushing failed. disable write back cacheing for journalled file 
systems [cut....]
Sono andato sul sito della Maxtor e ho verificato che tutti gli hd di 
produzione recente hanno attivato la writing cache di default.
Non so più che pesci pigliare.....
3) il comando insmod silraid mi dà il seguente avviso:
Using /lib/modules/2.4.20-4GB/kernel/drivers/ide/raid/silraid.o
Hint: insmod errors can be caused by incorrect module parameters, including 
invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg

Avete qualche idea in proposito ? 
Grazie mille per le eventuali dritte......
Ciao a tutti e a presto. piankhy

N.B.: l'output completo di dmesg è in allegato.


- -- 
Linux User - Have a lot of fun !!!!
Gpg key fingerprint : 381A 42E0 675C 6A17 1671  62FF E0E5 2F09 8251 35B1 

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.0.7 (GNU/Linux)

iD8DBQE+9MeV4OUvCYJRNbERAorQAJ9fP9EC9iyHDQJpcLSHyIxjBasTvwCeOpsY
LWPuSptYr12dhdMZrfWNRK4=
=4w6e
-----END PGP SIGNATURE-----
-------------- parte successiva --------------
Linux version 2.4.20-4GB (root@Pentium.suse.de) (gcc version 3.3 20030226 (prerelease) (SuSE Linux)) #1 Mon Mar 17 17:54:44 UTC 2003
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
 BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
 BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
 BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
1151MB HIGHMEM available.
896MB LOWMEM available.
ACPI: have wakeup address 0xc0001000
On node 0 totalpages: 524272
zone(0): 4096 pages.
zone(1): 225280 pages.
zone(2): 294896 pages.
ACPI: RSDP (v000 GBT                        ) @ 0x000f71f0
ACPI: RSDT (v001 GBT    AWRDACPI 16944.11825) @ 0x7fff3000
ACPI: FADT (v001 GBT    AWRDACPI 16944.11825) @ 0x7fff3040
ACPI: MADT (v001 GBT    AWRDACPI 16944.11825) @ 0x7fff6bc0
ACPI: DSDT (v001 GBT    AWRDACPI 00000.04096) @ 0x00000000
ACPI: BIOS passes blacklist
Building zonelist for node : 0
Kernel command line: root=/dev/hda7   hdc=ide-scsi hdclun=0 splash=silent splash=verbose
ide_setup: hdc=ide-scsi
ide_setup: hdclun=0
bootsplash: silent mode.
bootsplash: verbose mode.
Initializing CPU#0
Detected 2411.657 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 4810.34 BogoMIPS
Memory: 2068740k/2097088k available (1569k kernel code, 27960k reserved, 574k data, 160k init, 1179584k highmem)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 131072 (order: 7, 524288 bytes)
Page-cache hash table entries: 524288 (order: 9, 2097152 bytes)
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU:     After generic, caps: bfebfbff 00000000 00000000 00000000
CPU:             Common caps: bfebfbff 00000000 00000000 00000000
CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030228
PCI: PCI BIOS revision 2.10 entry at 0xfb020, last bus=1
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S1 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
PCI: Probing PCI hardware
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
apm: overridden by ACPI.
mxt_scan_bios: enter
Starting kswapd
bigpage subsystem: allocated 0 bigpages (=0MB).
allocated 32 pages and 32 bhs reserved for the highmem bounces
kinoded started
VFS: Disk quotas vdquot_6.5.1
aio_setup: num_physpages = 131068
aio_setup: sizeof(struct page) = 48
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 16 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:02.5
SIS5513: chipset revision 0
SIS5513: not 100% native mode: will probe irqs later
SiS5513    ATA 16 controller
    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
SiI3112 Serial ATA: IDE controller at PCI slot 00:10.0
SiI3112 Serial ATA: chipset revision 2
SiI3112 Serial ATA: not 100% native mode: will probe irqs later
    ide2: MMIO-DMA at 0xf8814000-0xf8814007, BIOS settings: hde:pio, hdf:pio
    ide3: MMIO-DMA at 0xf8814008-0xf881400f, BIOS settings: hdg:pio, hdh:pio
hda: Maxtor 6Y120L0, ATA DISK drive
hdb: Maxtor 6Y120L0, ATA DISK drive
hdc: HL-DT-ST DVDRAM GMA-4020B, ATAPI CD/DVD-ROM drive
hdd: ATAPI DVD-ROM 16X Maximum, ATAPI CD/DVD-ROM drive
hde: no response (status = 0xfe)
hdg: no response (status = 0xfe)
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63
hdb: attached ide-disk driver.
hdb: host protected area => 1
hdb: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=14946/255/63
ide-floppy driver 0.99.newide
Partition check:
 hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 >
ide-floppy driver 0.99.newide
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 16384 buckets, 128Kbytes
TCP: Hash tables configured (established 524288 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 431k freed
VFS: Mounted root (ext2 filesystem).
Guestimating sector 240120703 for superblock
Guestimating sector 240120703 for superblock
driver for Silicon Image(tm) Medley(tm) hardware version 0.0.1: No raid array found
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,7)) for (ide0(3,7))
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
hda: cache flushing failed. disable write back cacheing for journalled file systems
hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hda: drive_cmd: error=0x04 { DriveStatusError }
hda: cache flushing failed. disable write back cacheing for journalled file systems
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 160k freed
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
LVM version 1.0.5+(mp-v6a)(22/07/2002) module loaded
Adding Swap: 1052216k swap-space (priority 42)
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,6)) for (ide0(3,6))
Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,72)) for (ide0(3,72))
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
hdb: cache flushing failed. disable write back cacheing for journalled file systems
hdb: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
hdb: drive_cmd: error=0x04 { DriveStatusError }
hdb: cache flushing failed. disable write back cacheing for journalled file systems
Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,9)) for (ide0(3,9))
Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,69)) for (ide0(3,69))
Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,8)) for (ide0(3,8))
Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,65)) for (ide0(3,65))
Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (ide0(3,71)) for (ide0(3,71))
Using r5 hash to sort names
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
ehci-hcd 00:03.3: PCI device 1039:7002 (Silicon Integrated Systems [SiS])
ehci-hcd 00:03.3: irq 5, pci mem f8e10000
usb.c: new USB bus registered, assigned bus number 1
ehci-hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22
hub.c: USB hub found
hub.c: 6 ports detected
usb-uhci.c: $Revision: 1.275 $ time 18:24:43 Mar 17 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
hub.c: new USB device 00:03.3-3, assigned address 2
usb-ohci.c: USB OHCI at membase 0xf8e12000, IRQ 5
usb-ohci.c: usb-00:03.0, Silicon Integrated Systems [SiS] 7001
usb.c: USB device 2 (vend/prod 0x4b8/0x11e) is not claimed by any active driver.
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xf8e14000, IRQ 11
usb-ohci.c: usb-00:03.1, Silicon Integrated Systems [SiS] 7001 (#2)
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-ohci.c: USB OHCI at membase 0xf8e16000, IRQ 9
usb-ohci.c: usb-00:03.2, Silicon Integrated Systems [SiS] 7001 (#3)
hub.c: new USB device 00:03.3-4, assigned address 3
usb.c: new USB bus registered, assigned bus number 4
usb.c: USB device 3 (vend/prod 0x59b/0x35) is not claimed by any active driver.
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:03.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x45e/0x24) is not claimed by any active driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
input0: USB HID v1.00 Mouse [Microsoft Microsoft Trackball Explorer®] on usb2:2.0
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
loop: registered Twofish encryption 
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (loop(7,0)) for (loop(7,0))
Using r5 hash to sort names
reiserfs: found format "3.6" with standard journal
reiserfs: enabling write barrier flush mode
reiserfs: using ordered data mode
reiserfs: checking transaction log (loop(7,0)) for (loop(7,0))
Using r5 hash to sort names
hdd: attached ide-cdrom driver.
hdd: ATAPI 48X DVD-ROM drive, 256kB Cache
Uniform CD-ROM driver Revision: 3.12
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: HL-DT-ST  Model: DVDRAM GMA-4020B  Rev: A105
  Type:   CD-ROM                             ANSI SCSI revision: 02
blk: queue c03ac0c0, I/O limit 4095Mb (mask 0xffffffff)
blk: queue c03ac214, I/O limit 4095Mb (mask 0xffffffff)
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8192 buckets, 65536 max) - 296 bytes per conntrack
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
See Documentation/networking/vortex.txt
00:0b.0: 3Com PCI 3c905C Tornado at 0xb800. Vers LK1.1.16
 00:04:75:ef:0c:ad, IRQ 9
  product code 5558 rev 00.6 date 03-22-03
  Internal config register is 1800000, transceivers 0xa.
  8K byte-wide RAM 5:3 Rx:Tx split, autoselect/Autonegotiate interface.
  MII transceiver found at address 24, status 782d.
  Enabling bus-master transmits and whole-frame receives.
00:0b.0: scatter/gather enabled. h/w checksums enabled
ohci1394: $Rev: 758 $ Ben Collins <bcollins@debian.org>
ohci1394_0: Unexpected PCI resource length of 1000!
ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[11]  MMIO=[f7028000-f70287ff]  Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ohci1394_1: OHCI-1394 1.1 (PCI): IRQ=[9]  MMIO=[f7027000-f70277ff]  Max Packet=[2048]
ieee1394: SelfID completion called outside of bus reset!
ieee1394: Host added: Node[00:1023]  GUID[000020ed007de03b]  [Linux OHCI-1394]
ieee1394: Host added: Node[00:1023]  GUID[00023c009102b601]  [Linux OHCI-1394]
raw1394: /dev/raw1394 device initialized
usb-uhci.c: $Revision: 1.275 $ time 18:24:43 Mar 17 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
uhci.c: USB Universal Host Controller Interface driver v1.1
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 13x/32x writer dvd-ram cd/rw xa/form2 cdda tray
usb.c: registered new driver usbscanner
scanner.c: USB scanner device (0x04b8/0x011e) now attached to scanner0
scanner.c: 0.4.10:USB Scanner Driver
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi1 : SCSI emulation for USB Mass Storage devices
  Vendor: IOMEGA    Model: ZIP 750           Rev: 72.u
  Type:   Direct-Access                      ANSI SCSI revision: 02
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 489532 512-byte hdwr sectors (251 MB)
sda: Write Protect is off
 sda: sda4
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
USB Mass Storage support registered.
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module  1.0-4363  Sat Apr 19 17:46:46 PDT 2003
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 1919M
agpgart: Trying generic SiS routines for device id: 0655
agpgart: AGP aperture is 64M @ 0xf0000000
Linux video capture interface: v1.00
eth0: no IPv6 routers present