[Tech] Hylafax

[alex]

Ciao a tutti
vengo sulbito al punto
ho un server hylafax, funziona perfettamente tranne che quando riceve 
più di una pagina
succede questo, riceve la prima e poi da errore e il mittente del fax 
riceve il messaggio
che nulla è stato inviato
i log sono questi
ringrazio anticipatamente
--------------------------------------------------------------------------------------------------------------------
Failed to properly detect high-speed data carrier.

   ---- Transcript of session follows ----

mag 03 10:11:16.80: [ 3068]: SESSION BEGIN 000000240 39
mag 03 10:11:16.81: [ 3068]: HylaFAX (tm) Version 4.2.1
mag 03 10:11:16.81: [ 3068]: <-- [13:AT+FCLASS=1A\r]
mag 03 10:11:22.21: [ 3068]: --> [7:CONNECT]
mag 03 10:11:22.21: [ 3068]: ANSWER: FAX CONNECTION  DEVICE '/dev/ttyS0'
mag 03 10:11:22.21: [ 3068]: RECV FAX: begin
mag 03 10:11:24.09: [ 3068]: --> [7:CONNECT]
mag 03 10:11:25.24: [ 3068]: --> [7:CONNECT]
mag 03 10:11:26.06: [ 3068]: --> [2:OK]
mag 03 10:11:26.06: [ 3068]: <-- [9:AT+FRH=3\r]
mag 03 10:11:27.28: [ 3068]: --> [7:CONNECT]
mag 03 10:11:27.94: [ 3068]: --> [2:OK]
mag 03 10:11:27.94: [ 3068]: REMOTE TSI "********"
mag 03 10:11:27.94: [ 3068]: <-- [9:AT+FRH=3\r]
mag 03 10:11:27.99: [ 3068]: --> [7:CONNECT]
mag 03 10:11:28.22: [ 3068]: --> [2:OK]
mag 03 10:11:28.22: [ 3068]: REMOTE wants 14400 bit/s
mag 03 10:11:28.22: [ 3068]: REMOTE wants A4 page width (215 mm)
mag 03 10:11:28.22: [ 3068]: REMOTE wants unlimited page length
mag 03 10:11:28.22: [ 3068]: REMOTE wants 3.85 line/mm
mag 03 10:11:28.22: [ 3068]: REMOTE wants 2-D MMR
mag 03 10:11:28.22: [ 3068]: REMOTE wants T.30 Annex A, 256-byte ECM
mag 03 10:11:28.22: [ 3068]: RECV training at v.17 14400 bit/s
mag 03 10:11:28.22: [ 3068]: <-- [11:AT+FRM=145\r]
mag 03 10:11:29.91: [ 3068]: --> [7:CONNECT]
mag 03 10:11:31.45: [ 3068]: RECV: TCF 2777 bytes, 3% non-zero, 2690 
zero-run
mag 03 10:11:31.47: [ 3068]: --> [10:NO CARRIER]
mag 03 10:11:31.47: [ 3068]: DELAY 75 ms
mag 03 10:11:31.55: [ 3068]: TRAINING succeeded
mag 03 10:11:33.01: [ 3068]: <-- [9:AT+FTH=3\r]
mag 03 10:11:33.14: [ 3068]: --> [7:CONNECT]
mag 03 10:11:34.35: [ 3068]: --> [2:OK]
mag 03 10:11:34.35: [ 3068]: <-- [11:AT+FRM=146\r]
mag 03 10:11:35.03: [ 3068]: --> [7:CONNECT]
mag 03 10:11:36.67: [ 3068]: RECV received frame number 0
mag 03 10:11:36.83: [ 3068]: RECV received frame number 1
mag 03 10:11:36.98: [ 3068]: RECV received frame number 2
mag 03 10:11:37.12: [ 3068]: RECV received frame number 3
mag 03 10:11:37.28: [ 3068]: RECV received frame number 4
mag 03 10:11:37.43: [ 3068]: RECV received frame number 5
mag 03 10:11:37.58: [ 3068]: RECV received frame number 6
mag 03 10:11:37.73: [ 3068]: RECV received frame number 7
mag 03 10:11:37.87: [ 3068]: RECV received frame number 8
mag 03 10:11:38.01: [ 3068]: RECV received frame number 9
mag 03 10:11:38.15: [ 3068]: RECV received frame number 10
mag 03 10:11:38.30: [ 3068]: RECV received frame number 11
mag 03 10:11:38.45: [ 3068]: RECV received frame number 12
mag 03 10:11:38.59: [ 3068]: RECV received frame number 13
mag 03 10:11:38.73: [ 3068]: RECV received frame number 14
mag 03 10:11:38.94: [ 3068]: RECV received frame number 15
mag 03 10:11:39.08: [ 3068]: RECV received frame number 16
mag 03 10:11:39.23: [ 3068]: RECV received frame number 17
mag 03 10:11:39.31: [ 3068]: RECV received RCP frame
mag 03 10:11:39.48: [ 3068]: --> [10:NO CARRIER]
mag 03 10:11:39.48: [ 3068]: <-- [9:AT+FRH=3\r]
mag 03 10:11:40.48: [ 3068]: --> [7:CONNECT]
mag 03 10:11:40.73: [ 3068]: --> [2:OK]
mag 03 10:11:40.73: [ 3068]: RECV recv PPS (partial page signal)
mag 03 10:11:40.73: [ 3068]: RECV recv MPS (more pages, same document)
mag 03 10:11:40.73: [ 3068]: RECV received 18 frames of block 1 of page 1
mag 03 10:11:41.73: [ 3068]: <-- [9:AT+FRS=7\r]
mag 03 10:11:41.85: [ 3068]: --> [2:OK]
mag 03 10:11:41.85: [ 3068]: <-- [9:AT+FTH=3\r]
mag 03 10:11:41.98: [ 3068]: --> [7:CONNECT]
mag 03 10:11:42.55: [ 3068]: RECV: 4574 bytes of data, 1142 total lines
mag 03 10:11:43.19: [ 3068]: --> [2:OK]
mag 03 10:11:43.19: [ 3068]: RECV send RNR (receive not ready)
mag 03 10:11:43.19: [ 3068]: <-- [9:AT+FRH=3\r]
mag 03 10:11:44.37: [ 3068]: --> [7:CONNECT]
mag 03 10:11:44.50: [ 3068]: --> [2:OK]
mag 03 10:11:44.50: [ 3068]: RECV recv RR (receive ready)
mag 03 10:11:44.50: [ 3068]: <-- [9:AT+FRS=7\r]
mag 03 10:11:44.62: [ 3068]: --> [2:OK]
mag 03 10:11:44.65: [ 3068]: <-- [9:AT+FTH=3\r]
mag 03 10:11:44.78: [ 3068]: --> [7:CONNECT]
mag 03 10:11:44.78: [ 3068]: RECV send MCF (message confirmation)
mag 03 10:11:44.78: [ 3068]: RECV FAX (000000240): from ********, page 1 
in 0:13, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
mag 03 10:11:45.99: [ 3068]: --> [2:OK]
mag 03 10:11:45.99: [ 3068]: <-- [11:AT+FRM=146\r]
mag 03 10:11:53.10: [ 3068]: --> [2:OK]
mag 03 10:11:53.10: [ 3068]: <-- [9:AT+FRS=7\r]
mag 03 10:11:53.37: [ 3068]: --> [2:OK]
mag 03 10:11:53.37: [ 3068]: RECV FAX: Failed to properly detect 
high-speed data carrier.
mag 03 10:11:53.37: [ 3068]: <-- [9:AT+FTH=3\r]
mag 03 10:11:53.38: [ 3068]: RECV FAX (000000240): from ********, page 2 
in 0:09, INF, 3.85 line/mm, 2-D MMR, 14400 bit/s
mag 03 10:11:53.38: [ 3068]: RECV FAX (000000240): 
recvq/fax000000162.tif from ******** route to <unspecified>, 2 pages in 
0:31
mag 03 10:11:53.51: [ 3068]: --> [7:CONNECT]
mag 03 10:11:54.72: [ 3068]: --> [2:OK]
mag 03 10:11:54.72: [ 3068]: RECV FAX (000000240): session with ******** 
terminated abnormally: Failed to properly detect high-speed data carrier.
mag 03 10:11:54.72: [ 3068]: RECV FAX: bin/faxrcvd 
"recvq/fax000000162.tif" "ttyS0" "000000240" "Failed to properly detect 
high-speed data carrier." "" ""
mag 03 10:11:54.72: [ 3068]: RECV FAX: end
mag 03 10:11:54.80: [ 3068]: SESSION END