glug: sudo kanotix-installer

[SimoneBruno@fastwebnet.it]

>A questo punto dovresti mandare in lista il risultato di un lspci e tutto
>quello che trovi in nell'output di dmesg e riguarda acpi.
>
>Ciao
>sc

Grazie in anticipo Stefano, mi sembra di capire che tu sia in procinto di
partire:
Buone Vacanze!!!

aranbanjo@tux:~$ lspci
0000:00:00.0 Host bridge: Silicon Integrated Systems [SiS] 730 Host (rev
02)
0000:00:00.1 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
(rev d0)
0000:00:01.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513
(LPC Bridge)
0000:00:01.1 Ethernet controller: Silicon Integrated Systems [SiS] SiS900
PCI Fast Ethernet (rev 82)
0000:00:01.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 07)
0000:00:01.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller
(rev 07)
0000:00:01.4 Multimedia audio controller: Silicon Integrated Systems [SiS]
SiS PCI Audio Accelerator (rev 02)
0000:00:01.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller
(rev a0)
0000:00:02.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI
bridge (AGP)
0000:00:0a.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
0000:00:0a.1 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev 80)
0000:00:0e.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000
Controller (PHY/Link)
0000:01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS]
630/730 PCI/AGP VGA Display Adapter (rev 31)

.....

aranbanjo@tux:~$ dmesg
Linux version 2.6.6-kanotix-3 (root@Kanotix) (gcc version 3.3.4 (Debian
1:3.3.4-4)) #1 Thu Jul 22 14:25:50 CEST 2004
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000bfeb000 (usable)
 BIOS-e820: 000000000bfeb000 - 000000000bfef000 (ACPI data)
 BIOS-e820: 000000000bfef000 - 000000000bfff000 (reserved)
 BIOS-e820: 000000000bfff000 - 000000000c000000 (ACPI NVS)
 BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
191MB LOWMEM available.
On node 0 totalpages: 49131
  DMA zone: 4096 pages, LIFO batch:1
  Normal zone: 45035 pages, LIFO batch:10
  HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 ASUS                                      ) @ 0x000f6ad0
ACPI: RSDT (v001 ASUS   L2000D   0x42302e31 MSFT 0x31313031) @ 0x0bfeb000
ACPI: FADT (v001 ASUS   L2000D   0x42302e31 MSFT 0x31313031) @ 0x0bfeb080
ACPI: BOOT (v001 ASUS   L2000D   0x42302e31 MSFT 0x31313031) @ 0x0bfeb040
ACPI: DSDT (v001   ASUS L2000D   0x00001000 INTL 0x02002015) @ 0x00000000
ACPI: PM-Timer IO Port: 0xe408
Built 1 zonelists
Kernel command line: vga=0x317  root=/dev/hda3 ro ramdisk_size=100000 lang=de
apm=power-off hda=scsi hdb=scsi hdc=scsi hdd=scsi hde=scsi hdf=scsi hdg=scsi
hdh=scsi nomce vga=791
ide_setup: hda=scsi
ide_setup: hdb=scsi
ide_setup: hdc=scsi
ide_setup: hdd=scsi
ide_setup: hde=scsi
ide_setup: hdf=scsi
ide_setup: hdg=scsi
ide_setup: hdh=scsi
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 1194.756 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Memory: 190056k/196524k available (2629k kernel code, 5824k reserved, 1047k
data, 264k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode...
Ok.
Calibrating delay loop... 2375.68 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU:     After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU:     After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU:     After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
CPU: AMD mobile AMD Athlon(tm) 4   stepping 02
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1194.0549 MHz.
..... host bus clock speed is 199.0091 MHz.
NET: Registered protocol family 16
EISA bus registered
spurious 8259A interrupt: IRQ7.
PCI: PCI BIOS revision 2.10 entry at 0xf0fd0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 11 12 14 15) *9
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 11 12 14 15) *9
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Uncovering SIS18 that hid as a SIS503 (compatible=0)
Enabling SiS 96x SMBus.
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: Power Resource [FN0] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
SCSI subsystem initialized
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
PCI: Using ACPI for IRQ routing
vesafb: framebuffer at 0xf0000000, mapped to 0xcc80a000, size 16384k
vesafb: mode is 1024x768x16, linelength=2048, pages=4
vesafb: protected mode interface info at cb8d:0000
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
fb0: VESA VGA frame buffer device
Simple Boot Flag at 0x3a set to 0x1
Machine check exception polling timer started.
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SGI XFS with ACLs, security attributes, realtime, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Console: switching to colour frame buffer device 128x48
Generic RTC Driver v1.07
Using anticipatory io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
RAMDISK driver initialized: 16 RAM disks of 100000K size 1024 blocksize
loop: loaded (max 8 devices)
loop: registered Twofish encryption
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS730 ATA 100 (1st gen) controller
    ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
    ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:pio
hda: IC25N020ATCS04-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: UJDA730 DVD/CDRW, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 39070080 sectors (20003 MB) w/1768KiB Cache, CHS=38760/16/63, UDMA(33)
 hda: hda1 hda2 hda3
ide-cd: passing drive hdc to ide-scsi emulation.
ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX
as device
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
  Vendor: MATSHITA  Model: UJDA730 DVD/CDRW  Rev: 1.00
  Type:   CD-ROM                             ANSI SCSI revision: 02
libata version 1.02 loaded.
sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
mice: PS/2 mouse device common for all mice
input: PC Speaker
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
 Firmware: 4.6
 180 degree mounted touchpad
 Sensor: 18
 new absolute packet format
 Touchpad has extended capability bits
 -> four buttons
 -> multifinger detection
 -> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
md: linear personality registered as nr 1
md: raid0 personality registered as nr 2
md: raid1 personality registered as nr 3
md: raid5 personality registered as nr 4
raid5: measuring checksumming speed
   8regs     :  1820.000 MB/sec
   8regs_prefetch:  1808.000 MB/sec
   32regs    :  1176.000 MB/sec
   32regs_prefetch:  1080.000 MB/sec
   pIII_sse  :  1140.000 MB/sec
   pII_mmx   :  3208.000 MB/sec
   p5_mmx    :  4268.000 MB/sec
raid5: using function: pIII_sse (1140.000 MB/sec)
raid6: int32x1    457 MB/s
raid6: int32x2    578 MB/s
raid6: int32x4    347 MB/s
raid6: int32x8    339 MB/s
raid6: mmxx1     1000 MB/s
raid6: mmxx2     1750 MB/s
raid6: sse1x1     824 MB/s
raid6: sse1x2    1519 MB/s
raid6: using algorithm sse1x2 (1519 MB/s)
md: raid6 personality registered as nr 8
md: multipath personality registered as nr 7
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm@uk.sistina.com
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 1
PM: Reading pmdisk image.
PM: Resume from disk failed.
ACPI: (supports S0 S1 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
found reiserfs format "3.6" with standard journal
reiserfs: using ordered data mode
Reiserfs journal params: device hda3, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda3) for (hda3)
Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 264k freed
Adding 385520k swap on /dev/hda1.  Priority:-1 extents:1
ACPI: AC Adapter [AC] (on-line)
Asus Laptop ACPI Extras version 0.28
  Error calling BSTS
  L2D model detected, supported
ACPI: Battery Slot [BAT0] (battery absent)
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Lid Switch [LID]
ACPI: Fan [FAN0] (on)
ACPI: Processor [CPU0] (supports C1)
ACPI: Thermal Zone [THRM] (80 C)
Linux Kernel Card Services
  options:  [pci] [cardbus] [pm]
Yenta: CardBus bridge found at 0000:00:0a.0 [1043:1594]
Yenta: ISA IRQ mask 0x0498, PCI irq 11
Socket status: 30000006
Yenta: CardBus bridge found at 0000:00:0a.1 [1043:1594]
Yenta: ISA IRQ mask 0x0498, PCI irq 11
Socket status: 30000006
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
ohci_hcd 0000:00:01.2: Silicon Integrated Systems [SiS] USB 1.0 Controller
ohci_hcd 0000:00:01.2: irq 11, pci mem cd936000
ohci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ohci_hcd 0000:00:01.3: Silicon Integrated Systems [SiS] USB 1.0 Controller
(#2)
ohci_hcd 0000:00:01.3: irq 11, pci mem cd938000
ohci_hcd 0000:00:01.3: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1203 $ Ben Collins <bcollins@debian.org>
usb 1-3: new low speed USB device using address 2
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[e9000000-e90007ff]
 Max Packet=[2048]
input: USB HIDBP Mouse 0461:4d03 on usb-0000:00:01.2-3
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
ts: Compaq touchscreen protocol output
usbcore: registered new driver hiddev
usbcore: registered new driver hid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
ip1394: $Rev: 1198 $ Ben Collins <bcollins@debian.org>
ip1394: eth0: IEEE-1394 IPv4 over 1394 Ethernet (fw-host0)
Serial: 8250/16550 driver $Revision: 1.90 $ 14 ports, IRQ sharing disabled
ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a NS16550A
ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00e0180003016b23]
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,  type 5
slamr: module license 'Smart Link Ltd.' taints kernel.
slamr: SmartLink AMRMO modem.
slamr: probe 1039:7013 SiS630 card...
slamr: mc97 codec is SIL21
slamr: slamr0 is SiS630 card.
sis900.c: v1.08.07 11/02/2003
eth1: ICS LAN PHY transceiver found at address 1.
eth1: Using transceiver found at address 1 as default
eth1: SiS 900 PCI Fast Ethernet at 0xd400, IRQ 11, 00:e0:18:71:d9:39.
Linux agpgart interface v0.100 (c) Dave Jones
NET: Registered protocol family 17
agpgart: Detected SiS 730 chipset
agpgart: Maximum main memory to use for agp memory: 149M
agpgart: AGP aperture is 64M @ 0xec000000
[drm] Initialized sis 1.1.0 20030826 on minor 0
found reiserfs format "3.6" with standard journal
reiserfs: using ordered data mode
Reiserfs journal params: device hda2, size 8192, journal first block 18,
max trans len 1024, max batch 900, max commit age 30, max trans age 30
reiserfs: checking transaction log (hda2) for (hda2)
Using r5 hash to sort names
blk: queue cbd13a00, I/O limit 4095Mb (mask 0xffffffff)
cs: IO port probe 0x0100-0x04ff: excluding 0x378-0x37f 0x480-0x48f 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
lp0: using parport0 (polling).
lp0: console ready
apm: BIOS not found.
mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x1000000
mtrr: 0xf0000000,0x4000000 overlaps existing 0xf0000000,0x1000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
NET: Registered protocol family 10
Disabled Privacy Extensions on device c0451420(lo)
IPv6 over IPv4 tunneling driver
eth1: Media Link On 10mbps half-duplex
eth1: no IPv6 routers present
eth1: Media Link On 10mbps half-duplex
eth1: no IPv6 routers present

A me sembra riconoscere tutto e di +, anche la serie del mio notebook Asus
(L2D), a parte quell'error calling BSTS, che non so proprio cosa sia...che
è si mangia?

root@tux:/var/log# cat acpid
[Thu Aug  5 18:06:29 2004] starting up
[Thu Aug  5 18:06:29 2004] 1 rule loaded
[Thu Aug  5 18:47:28 2004] exiting
[Mon Aug  9 10:54:29 2004] starting up
[Mon Aug  9 10:54:29 2004] 1 rule loaded
[Mon Aug  9 11:01:43 2004] exiting
[Mon Aug  9 11:02:54 2004] starting up
[Mon Aug  9 11:02:54 2004] 1 rule loaded

Come vedi anche acpid sembra funzionare....

Saluti,
Simone.