[LTP] [PATCH v3 1/2] syscalls/ioctl_loop06: Using LOOP_CONFIGURE to test invalid block size
Yang Xu
xuyang2018.jy@cn.fujitsu.com
Fri Jul 24 04:05:56 CEST 2020
Since kernel commit 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl"),
it can set the correct block size immediately by setting loop_config.block_size.
Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
---
v2-v3:
1.remove tst_attch_device in setup
2.use tst_detach_device_by_fd api
.../kernel/syscalls/ioctl/ioctl_loop06.c | 88 +++++++++++++++----
1 file changed, 70 insertions(+), 18 deletions(-)
diff --git a/testcases/kernel/syscalls/ioctl/ioctl_loop06.c b/testcases/kernel/syscalls/ioctl/ioctl_loop06.c
index 096ec9363..d073c120b 100644
--- a/testcases/kernel/syscalls/ioctl/ioctl_loop06.c
+++ b/testcases/kernel/syscalls/ioctl/ioctl_loop06.c
@@ -3,8 +3,8 @@
* Copyright (c) 2020 FUJITSU LIMITED. All rights reserved.
* Author: Yang Xu <xuyang2018.jy@cn.jujitsu.com>
*
- * This is a basic ioctl error test about loopdevice
- * LOOP_SET_BLOCK_SIZE.
+ * This is a basic error test about the invalid block size of loopdevice
+ * by using LOOP_SET_BLOCK_SIZE or LOOP_CONFIGURE ioctl.
*/
#include <stdio.h>
@@ -15,49 +15,89 @@
#include "tst_test.h"
static char dev_path[1024];
-static int dev_num, dev_fd, attach_flag;
+static int dev_num, dev_fd, file_fd, attach_flag, loop_configure_sup = 1;
static unsigned int invalid_value, half_value, unalign_value;
+static struct loop_config loopconfig;
static struct tcase {
unsigned int *setvalue;
- int exp_err;
+ int ioctl_flag;
char *message;
} tcases[] = {
- {&half_value, EINVAL, "arg < 512"},
- {&invalid_value, EINVAL, "arg > PAGE_SIZE"},
- {&unalign_value, EINVAL, "arg != power_of_2"},
+ {&half_value, LOOP_SET_BLOCK_SIZE,
+ "Using LOOP_SET_BLOCK_SIZE with arg < 512"},
+
+ {&invalid_value, LOOP_SET_BLOCK_SIZE,
+ "Using LOOP_SET_BLOCK_SIZE with arg > PAGE_SIZE"},
+
+ {&unalign_value, LOOP_SET_BLOCK_SIZE,
+ "Using LOOP_SET_BLOCK_SIZE with arg != power_of_2"},
+
+ {&half_value, LOOP_CONFIGURE,
+ "Using LOOP_CONFIGURE with block_size < 512"},
+
+ {&invalid_value, LOOP_CONFIGURE,
+ "Using LOOP_CONFIGURE with block_size > PAGE_SIZE"},
+
+ {&unalign_value, LOOP_CONFIGURE,
+ "Using LOOP_CONFIGURE with block_size != power_of_2"},
};
static void verify_ioctl_loop(unsigned int n)
+{
+ if (tcases[n].ioctl_flag == LOOP_CONFIGURE)
+ TEST(ioctl(dev_fd, LOOP_CONFIGURE, &loopconfig));
+ else
+ TEST(ioctl(dev_fd, LOOP_SET_BLOCK_SIZE, *(tcases[n].setvalue)));
+
+ if (TST_RET == 0) {
+ tst_res(TFAIL, "Set block size succeed unexpectedly");
+ if (tcases[n].ioctl_flag == LOOP_CONFIGURE)
+ TST_RETRY_FUNC(ioctl(dev_fd, LOOP_CLR_FD, 0), TST_RETVAL_EQ0);
+ return;
+ }
+ if (TST_ERR == EINVAL)
+ tst_res(TPASS | TTERRNO, "Set block size failed as expected");
+ else
+ tst_res(TFAIL | TTERRNO, "Set block size failed expected EINVAL got");
+}
+
+static void run(unsigned int n)
{
struct tcase *tc = &tcases[n];
tst_res(TINFO, "%s", tc->message);
- TEST(ioctl(dev_fd, LOOP_SET_BLOCK_SIZE, *(tc->setvalue)));
- if (TST_RET == 0) {
- tst_res(TFAIL, "LOOP_SET_BLOCK_SIZE succeed unexpectedly");
+ if (tc->ioctl_flag == LOOP_SET_BLOCK_SIZE) {
+ if (!attach_flag) {
+ tst_attach_device(dev_path, "test.img");
+ attach_flag = 1;
+ }
+ verify_ioctl_loop(n);
return;
}
- if (TST_ERR == tc->exp_err) {
- tst_res(TPASS | TTERRNO, "LOOP_SET_BLOCK_SIZE failed as expected");
- } else {
- tst_res(TFAIL | TTERRNO, "LOOP_SET_BLOCK_SIZE failed expected %s got",
- tst_strerrno(tc->exp_err));
+ if (tc->ioctl_flag == LOOP_CONFIGURE && !loop_configure_sup) {
+ tst_res(TCONF, "LOOP_CONFIGURE ioctl not supported");
+ return;
}
+ if (attach_flag) {
+ tst_detach_device_by_fd(dev_path, dev_fd);
+ attach_flag = 0;
+ }
+ loopconfig.block_size = *(tc->setvalue);
+ verify_ioctl_loop(n);
}
static void setup(void)
{
unsigned int pg_size;
+ int ret;
dev_num = tst_find_free_loopdev(dev_path, sizeof(dev_path));
if (dev_num < 0)
tst_brk(TBROK, "Failed to find free loop device");
tst_fill_file("test.img", 0, 1024, 1024);
- tst_attach_device(dev_path, "test.img");
- attach_flag = 1;
half_value = 256;
pg_size = getpagesize();
invalid_value = pg_size * 2 ;
@@ -67,12 +107,24 @@ static void setup(void)
if (ioctl(dev_fd, LOOP_SET_BLOCK_SIZE, 512) && errno == EINVAL)
tst_brk(TCONF, "LOOP_SET_BLOCK_SIZE is not supported");
+
+ file_fd = SAFE_OPEN("test.img", O_RDWR);
+ loopconfig.fd = -1;
+ ret = ioctl(dev_fd, LOOP_CONFIGURE, &loopconfig);
+ if (ret && errno != EBADF) {
+ tst_res(TINFO | TERRNO, "LOOP_CONFIGURE is not supported");
+ loop_configure_sup = 0;
+ return;
+ }
+ loopconfig.fd = file_fd;
}
static void cleanup(void)
{
if (dev_fd > 0)
SAFE_CLOSE(dev_fd);
+ if (file_fd > 0)
+ SAFE_CLOSE(file_fd);
if (attach_flag)
tst_detach_device(dev_path);
}
@@ -80,7 +132,7 @@ static void cleanup(void)
static struct tst_test test = {
.setup = setup,
.cleanup = cleanup,
- .test = verify_ioctl_loop,
+ .test = run,
.tcnt = ARRAY_SIZE(tcases),
.needs_root = 1,
.needs_tmpdir = 1,
--
2.23.0
More information about the ltp
mailing list