[LTP] [PATCH v3 2/2] syscalls/ioctl_loop05: Using LOOP_CONFIGURE to set direct io
Yang Xu
xuyang2018.jy@cn.fujitsu.com
Fri Jul 24 04:05:57 CEST 2020
Since kernel commit 3448914e8cc5("loop: Add LOOP_CONFIGURE ioctl"),
it can explicitly request direct I/O mode by setting LO_FLAGS_DIRECT_IO
in loop_config.info.lo_flags.
Signed-off-by: Yang Xu <xuyang2018.jy@cn.fujitsu.com>
---
v2->v3:
1.Use tst_detach_device_by_fd api
.../kernel/syscalls/ioctl/ioctl_loop05.c | 151 +++++++++++++-----
1 file changed, 114 insertions(+), 37 deletions(-)
diff --git a/testcases/kernel/syscalls/ioctl/ioctl_loop05.c b/testcases/kernel/syscalls/ioctl/ioctl_loop05.c
index e3c14faab..7491e62fa 100644
--- a/testcases/kernel/syscalls/ioctl/ioctl_loop05.c
+++ b/testcases/kernel/syscalls/ioctl/ioctl_loop05.c
@@ -19,6 +19,9 @@
* enabled but falls back to buffered I/O later on. This is the case at least
* for Btrfs. Because of that the test passes both with failure as well as
* success with non-zero offset.
+ *
+ * Also use LOOP_CONFIGURE to test this by setting LO_FLAGS_DIRECT_IO
+ * in loop_config.info.lo_flags.
*/
#include <stdio.h>
@@ -32,8 +35,36 @@
#define DIO_MESSAGE "In dio mode"
#define NON_DIO_MESSAGE "In non dio mode"
-static char dev_path[1024], sys_loop_diopath[1024], backing_file_path[1024];;
+static char dev_path[1024], sys_loop_diopath[1024], backing_file_path[1024];
static int dev_num, dev_fd, block_devfd, attach_flag, logical_block_size;
+static int file_fd, loop_configure_sup = 1;
+static struct loop_config loopconfig;
+static struct loop_info loopinfo;
+
+static struct tcase {
+ int multi; /*logical_block_size / 2 as unit */
+ int dio_value;
+ int ioctl_flag;
+ char *message;
+} tcases[] = {
+ {0, 1, LOOP_SET_DIRECT_IO,
+ "Using LOOP_SET_DIRET_IO without setting lo_offset or sizelimit"},
+
+ {2, 1, LOOP_SET_DIRECT_IO,
+ "Using LOOP_SET_DIRECT_IO With offset equal to logical_block_size"},
+
+ {1, 0, LOOP_SET_DIRECT_IO,
+ "Using LOOP_SET_DIRECT_IO with offset less than logical_block_size"},
+
+ {0, 1, LOOP_CONFIGURE,
+ "Using LOOP_CONFIGURE without setting lo_offset or sizelimit"},
+
+ {2, 1, LOOP_CONFIGURE,
+ "Using LOOP_CONFIGURE With offset equal to logical_block_size"},
+
+ {1, 0, LOOP_CONFIGURE,
+ "Using LOOP_CONFIGURE witg offset less than logical_block_size"},
+};
static void check_dio_value(int flag)
{
@@ -42,61 +73,91 @@ static void check_dio_value(int flag)
memset(&loopinfoget, 0, sizeof(loopinfoget));
SAFE_IOCTL(dev_fd, LOOP_GET_STATUS, &loopinfoget);
- tst_res(TINFO, "%s", flag ? DIO_MESSAGE : NON_DIO_MESSAGE);
if (loopinfoget.lo_flags & LO_FLAGS_DIRECT_IO)
- tst_res(flag ? TPASS : TFAIL, "lo_flags has LO_FLAGS_DIRECT_IO flag");
+ tst_res(flag ? TPASS : TFAIL,
+ "%s, lo_flags has LO_FLAGS_DIRECT_IO flag",
+ flag ? DIO_MESSAGE : NON_DIO_MESSAGE);
else
- tst_res(flag ? TFAIL : TPASS, "lo_flags doesn't have LO_FLAGS_DIRECT_IO flag");
+ tst_res(flag ? TFAIL : TPASS,
+ "%s, lo_flags doesn't have LO_FLAGS_DIRECT_IO flag",
+ flag ? DIO_MESSAGE : NON_DIO_MESSAGE);
TST_ASSERT_INT(sys_loop_diopath, flag);
}
-static void verify_ioctl_loop(void)
+static void verify_ioctl_loop(unsigned int n)
{
- struct loop_info loopinfo;
-
- memset(&loopinfo, 0, sizeof(loopinfo));
- TST_RETRY_FUNC(ioctl(dev_fd, LOOP_SET_STATUS, &loopinfo), TST_RETVAL_EQ0);
+ if (tcases[n].ioctl_flag == LOOP_SET_DIRECT_IO) {
+ TST_RETRY_FUNC(ioctl(dev_fd, LOOP_SET_STATUS, &loopinfo), TST_RETVAL_EQ0);
+
+ TEST(ioctl(dev_fd, LOOP_SET_DIRECT_IO, 1));
+ if (TST_RET == 0) {
+ if (tcases[n].dio_value)
+ tst_res(TPASS, "set direct io succeeded");
+ else
+ tst_res(TPASS, "set direct io succeeded, offset is ignored");
+ check_dio_value(1);
+ SAFE_IOCTL(dev_fd, LOOP_SET_DIRECT_IO, 0);
+ return;
+ }
+ if (TST_ERR == EINVAL && !tcases[n].dio_value)
+ tst_res(TPASS | TTERRNO,
+ "set direct io failed as expected");
+ else
+ tst_res(TFAIL | TTERRNO, "set direct io failed");
+ return;
+ }
+ /*
+ * When we call loop_configure ioctl successfully and detach it,
+ * the subquent loop_configure without non-zero lo_offset or
+ * sizelimit may trigger the blk_update_request I/O error.
+ * To avoid this, sleep 1s to ensure last blk_update_request has
+ * completed.
+ */
+ sleep(1);
+ /*
+ * loop_cofigure calls loop_update_dio() function, it will ignore
+ * the result of setting dio. It is different from loop_set_dio.
+ */
+ TST_RETRY_FUNC(ioctl(dev_fd, LOOP_CONFIGURE, &loopconfig), TST_RETVAL_EQ0);
+ check_dio_value(tcases[n].dio_value);
+ TST_RETRY_FUNC(ioctl(dev_fd, LOOP_CLR_FD, 0), TST_RETVAL_EQ0);
+}
- tst_res(TINFO, "Without setting lo_offset or sizelimit");
- SAFE_IOCTL(dev_fd, LOOP_SET_DIRECT_IO, 1);
- check_dio_value(1);
+static void run(unsigned int n)
+{
+ struct tcase *tc = &tcases[n];
- SAFE_IOCTL(dev_fd, LOOP_SET_DIRECT_IO, 0);
- check_dio_value(0);
+ tst_res(TINFO, "%s", tc->message);
- tst_res(TINFO, "With offset equal to logical_block_size");
- loopinfo.lo_offset = logical_block_size;
- TST_RETRY_FUNC(ioctl(dev_fd, LOOP_SET_STATUS, &loopinfo), TST_RETVAL_EQ0);
- TEST(ioctl(dev_fd, LOOP_SET_DIRECT_IO, 1));
- if (TST_RET == 0) {
- tst_res(TPASS, "LOOP_SET_DIRECT_IO succeeded");
- check_dio_value(1);
+ if (tc->ioctl_flag == LOOP_SET_DIRECT_IO) {
+ if (!attach_flag) {
+ tst_attach_device(dev_path, "test.img");
+ attach_flag = 1;
+ }
SAFE_IOCTL(dev_fd, LOOP_SET_DIRECT_IO, 0);
- } else {
- tst_res(TFAIL | TTERRNO, "LOOP_SET_DIRECT_IO failed");
+ check_dio_value(0);
+ loopinfo.lo_offset = logical_block_size * tc->multi / 2;
+ verify_ioctl_loop(n);
+ return;
}
-
- tst_res(TINFO, "With nonzero offset less than logical_block_size");
- loopinfo.lo_offset = logical_block_size / 2;
- TST_RETRY_FUNC(ioctl(dev_fd, LOOP_SET_STATUS, &loopinfo), TST_RETVAL_EQ0);
-
- TEST(ioctl(dev_fd, LOOP_SET_DIRECT_IO, 1));
- if (TST_RET == 0) {
- tst_res(TPASS, "LOOP_SET_DIRECT_IO succeeded, offset is ignored");
- SAFE_IOCTL(dev_fd, LOOP_SET_DIRECT_IO, 0);
+ if (tc->ioctl_flag == LOOP_CONFIGURE && !loop_configure_sup) {
+ tst_res(TCONF, "LOOP_CONFIGURE ioctl not supported");
return;
}
- if (TST_ERR == EINVAL)
- tst_res(TPASS | TTERRNO, "LOOP_SET_DIRECT_IO failed as expected");
- else
- tst_res(TFAIL | TTERRNO, "LOOP_SET_DIRECT_IO failed expected EINVAL got");
+ if (attach_flag) {
+ tst_detach_device_by_fd(dev_path, dev_fd);
+ attach_flag = 0;
+ }
+ loopconfig.info.lo_offset = logical_block_size * tc->multi / 2;
+ verify_ioctl_loop(n);
}
static void setup(void)
{
char bd_path[100];
+ int ret;
if (tst_fs_type(".") == TST_TMPFS_MAGIC)
tst_brk(TCONF, "tmpfd doesn't support O_DIRECT flag");
@@ -128,8 +189,21 @@ static void setup(void)
SAFE_IOCTL(block_devfd, BLKSSZGET, &logical_block_size);
tst_res(TINFO, "backing dev(%s) logical_block_size is %d", bd_path, logical_block_size);
SAFE_CLOSE(block_devfd);
+
if (logical_block_size > 512)
TST_RETRY_FUNC(ioctl(dev_fd, LOOP_SET_BLOCK_SIZE, logical_block_size), TST_RETVAL_EQ0);
+
+ file_fd = SAFE_OPEN("test.img", O_RDWR);
+ loopconfig.fd = -1;
+ ret = ioctl(dev_fd, LOOP_CONFIGURE, &loopconfig);
+ if (ret && errno != EBADF) {
+ tst_res(TINFO | TERRNO, "LOOP_CONFIGURE is not supported");
+ loop_configure_sup = 0;
+ return;
+ }
+ loopconfig.block_size = logical_block_size;
+ loopconfig.fd = file_fd;
+ loopconfig.info.lo_flags = LO_FLAGS_DIRECT_IO;
}
static void cleanup(void)
@@ -138,6 +212,8 @@ static void cleanup(void)
SAFE_CLOSE(dev_fd);
if (block_devfd > 0)
SAFE_CLOSE(block_devfd);
+ if (file_fd > 0)
+ SAFE_CLOSE(file_fd);
if (attach_flag)
tst_detach_device(dev_path);
}
@@ -145,7 +221,8 @@ static void cleanup(void)
static struct tst_test test = {
.setup = setup,
.cleanup = cleanup,
- .test_all = verify_ioctl_loop,
+ .test = run,
+ .tcnt = ARRAY_SIZE(tcases),
.needs_root = 1,
.needs_tmpdir = 1,
.needs_drivers = (const char *const []) {
--
2.23.0
More information about the ltp
mailing list