[Primipassi] pacchetto per firewire su ppc

[Francesco]

Salve

ho aggiornato il kernel alla Linux jibby 2.6.22-2-powerpc 
debian etch
fino adesso se attaccavo un hard-disk esterno via firewire
riconosceva il tutto come usb
adesso non riconosce o meglio non monta niente
e mi da' questa risposta un po' criptica per me
c'è uno scsi0

jibby:~# firewire_core: phy config: card 0, new root=ffc1, gap_count=5
scsi0 : SBP-2 IEEE-1394
firewire_core: created new fw device fw1 (0 config rom retries)
firewire_sbp2: logged in to sbp2 unit fw1.0 (0 retries)
firewire_sbp2:  - management_agent_address:    0xfffff0030000
firewire_sbp2:  - command_block_agent_address: 0xfffff0100000
firewire_sbp2:  - status write address:        0x000100000000
scsi 0:0:0:0: Direct-Access-RBC ST325082 3A               3.01 PQ: 0
ANSI: 4
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't
support DPO or FUA
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI disk

se poi do mount
scsi0 non lo vedo

jibby:~# mount
/dev/mapper/jibby-root on / type ext3 (rw,errors=remount-ro)
tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
proc on /proc type proc (rw,noexec,nosuid,nodev)
sysfs on /sys type sysfs (rw,noexec,nosuid,nodev)
procbususb on /proc/bus/usb type usbfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620)
/dev/hda3 on /boot type ext3 (rw)
/dev/mapper/jibby-home on /home type ext3 (rw)

consigli ????
grazie in anticipo
-- 
Francesco
Let's Drop The Knees Not The Bombs
(Allen O'Bannon & Mike Clelland)
Key ID 26762990
-------------- parte successiva --------------
Un allegato non testuale è stato rimosso....
Nome:        non disponibile
Tipo:        application/pgp-signature
Dimensione:  189 bytes
Descrizione: Digital signature
URL:         <http://lists.linux.it/pipermail/primipassi/attachments/20071028/2dc72c8f/attachment.pgp>