Revisione traduzione PulseAudio

Milo Casagrande milo@casagrande.name
Gio 24 Set 2009 22:33:11 CEST


Come da oggetto. I messaggi fuzzy sono quelli diversi rispetto
l'ultima revisione.

Grazie.

############################################

# Italian translation for PulseAudio.
# Copyright (C) 2008, 2009 The Free Software Foundation, Inc
# This file is distributed under the same license as the pulseaudio package.
#
# Luca Ferretti <elle.uca@libero.it>, 2008, 2009.
# mario_santagiuliana <mario at marionline.it>, 2009.
# Milo Casagrande <milo@ubuntu.com>, 2009.
msgid ""
msgstr ""
"Project-Id-Version: pulseaudio\n"
"Report-Msgid-Bugs-To: \n"
"POT-Creation-Date: 2009-09-24 14:50+0000\n"
"PO-Revision-Date: 2009-09-24 22:26+0200\n"
"Last-Translator: Milo Casagrande <milo@ubuntu.com>\n"
"Language-Team: Italian <tp@lists.linux.it>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=2; plural=(n != 1);\n"

#: ../src/modules/alsa/alsa-util.c:858 ../src/pulsecore/sink.c:2629
#, c-format
msgid "%s %s"
msgstr "%s %s"

#: ../src/modules/alsa/alsa-util.c:1106
#, c-format
msgid ""
"snd_pcm_avail() returned a value that is exceptionally large: %lu bytes (%lu "
"ms).\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers."
msgstr ""
"snd_pcm_avail() ha restituito un valore molto grande: %lu byte (%lu ms).\n"
"Molto probabilmente si tratta di un bug nel driver ALSA \"%s\". Segnalare "
"questo problema agli sviluppatori ALSA."

#: ../src/modules/alsa/alsa-util.c:1147
#, c-format
msgid ""
"snd_pcm_delay() returned a value that is exceptionally large: %li bytes (%s%"
"lu ms).\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers."
msgstr ""
"snd_pcm_delay() ha restituito un valore molto grande: %li byte (%s%lu ms).\n"
"Molto probabilmente si tratta di un bug nel driver ALSA \"%s\". Segnalare "
"questo problema agli sviluppatori ALSA."

#: ../src/modules/alsa/alsa-util.c:1194
#, c-format
msgid ""
"snd_pcm_mmap_begin() returned a value that is exceptionally large: %lu bytes "
"(%lu ms).\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers."
msgstr ""
"snd_pcm_mmap_begin() ha restituito un valore molto grande: %lu byte (%lu "
"ms).\n"
"Molto probabilmente si tratta di un bug nel driver ALSA \"%s\". Segnalare "
"questo problema agli sviluppatori ALSA."

#: ../src/modules/module-always-sink.c:39
#, fuzzy
msgid "Always keeps at least one sink loaded even if it's a null one"
msgstr "Mantiene sempre almeno un sink caricato anche se è nullo"

#: ../src/modules/module-always-sink.c:83
#, fuzzy
msgid "Dummy Output"
msgstr "Output dummy"

#: ../src/modules/module-ladspa-sink.c:49
msgid "Virtual LADSPA sink"
msgstr "Sink LADSPA virtuale"

#: ../src/modules/module-ladspa-sink.c:53
msgid ""
"sink_name=<name for the sink> sink_properties=<properties for the sink> "
"master=<name of sink to filter> format=<sample format> rate=<sample rate> "
"channels=<number of channels> channel_map=<channel map> plugin=<ladspa "
"plugin name> label=<ladspa plugin label> control=<comma seperated list of "
"input control values>"
msgstr ""
"sink_name=<nome del sink> sink_properties=<proprietà del sink> master=<nome "
"del sink da filtrare> format=<formato campionamento> rate=<frequenza "
"campionamento> channels=<numero di canali> channel_map=<mappa canale> "
"plugin=<nome plugin ladspa> label=<etichetta plugin ladspa> control=<valori "
"di controllo separati da virgole>"

#: ../src/modules/module-null-sink.c:55
#, fuzzy
msgid "Clocked NULL sink"
msgstr "Sink NULL temporizzato"

#: ../src/modules/module-null-sink.c:291
#, fuzzy
msgid "Null Output"
msgstr "Output nullo"

#: ../src/pulsecore/sink.c:2613
msgid "Internal Audio"
msgstr "Audio interno"

#: ../src/pulsecore/sink.c:2618
msgid "Modem"
msgstr "Modem"

#: ../src/daemon/ltdl-bind-now.c:124
msgid "Failed to find original lt_dlopen loader."
msgstr "Ricerca del loader lt_dlopen originale non riuscita."

#: ../src/daemon/ltdl-bind-now.c:129
msgid "Failed to allocate new dl loader."
msgstr "Allocazione del nuovo loader dl non riuscita."

#: ../src/daemon/ltdl-bind-now.c:142
msgid "Failed to add bind-now-loader."
msgstr "Aggiunta di bind-now-loader non riuscita."

#: ../src/daemon/main.c:141
#, c-format
msgid "Got signal %s."
msgstr "Ottenuto il segnale %s."

#: ../src/daemon/main.c:168
msgid "Exiting."
msgstr "Uscita."

#: ../src/daemon/main.c:186
#, c-format
msgid "Failed to find user '%s'."
msgstr "Ricerca dell'utente \"%s\" non riuscita."

#: ../src/daemon/main.c:191
#, c-format
msgid "Failed to find group '%s'."
msgstr "Ricerca del gruppo \"%s\" non riuscita."

#: ../src/daemon/main.c:195
#, c-format
msgid "Found user '%s' (UID %lu) and group '%s' (GID %lu)."
msgstr "Trovato l'utente \"%s\" (UID %lu) e il gruppo \"%s\" (GID %lu)."

#: ../src/daemon/main.c:200
#, c-format
msgid "GID of user '%s' and of group '%s' don't match."
msgstr "Il GID dell'utente \"%s\" e del gruppo \"%s\" non corrispondono."

#: ../src/daemon/main.c:205
#, c-format
msgid "Home directory of user '%s' is not '%s', ignoring."
msgstr "La directory home dell'utente \"%s\" non è \"%s\", ignorato."

#: ../src/daemon/main.c:208 ../src/daemon/main.c:213
#, c-format
msgid "Failed to create '%s': %s"
msgstr "Creazione di \"%s\" non riuscita: %s"

# group list ????
#: ../src/daemon/main.c:220
#, c-format
msgid "Failed to change group list: %s"
msgstr "Cambio dell'elenco di gruppo non riuscito: %s"

#: ../src/daemon/main.c:236
#, c-format
msgid "Failed to change GID: %s"
msgstr "Cambio di GID non riuscito: %s"

#: ../src/daemon/main.c:252
#, c-format
msgid "Failed to change UID: %s"
msgstr "Cambio di UID non riuscito: %s"

#: ../src/daemon/main.c:271
msgid "Successfully dropped root privileges."
msgstr "Privilegi di root abbandonati con successo."

#: ../src/daemon/main.c:279
msgid "System wide mode unsupported on this platform."
msgstr "Modalità di sistema non supportata su questa piattaforma."

#: ../src/daemon/main.c:297
#, c-format
msgid "setrlimit(%s, (%u, %u)) failed: %s"
msgstr "setrlimit(%s, (%u, %u)) non riuscita: %s"

#: ../src/daemon/main.c:469
msgid "Failed to parse command line."
msgstr "Analisi della riga di comando non riuscita."

#: ../src/daemon/main.c:536
msgid "Daemon not running"
msgstr "Demone non in esecuzione"

#: ../src/daemon/main.c:538
#, c-format
msgid "Daemon running as PID %u"
msgstr "Demone in esecuzione con PID %u"

#: ../src/daemon/main.c:548
#, c-format
msgid "Failed to kill daemon: %s"
msgstr "Terminazione del demone non riuscita: %s"

#: ../src/daemon/main.c:566
msgid ""
"This program is not intended to be run as root (unless --system is "
"specified)."
msgstr ""
"Questo programma non è pensato per essere eseguito come root (a meno di "
"specificare --system)."

#: ../src/daemon/main.c:568
msgid "Root privileges required."
msgstr "Richiesti privilegi di root."

#: ../src/daemon/main.c:573
msgid "--start not supported for system instances."
msgstr "--start non supportato per le istanze di sistema."

#: ../src/daemon/main.c:578
msgid "Running in system mode, but --disallow-exit not set!"
msgstr "In esecuzione in modalità sistema, ma --disallow-exit non impostato."

#: ../src/daemon/main.c:581
msgid "Running in system mode, but --disallow-module-loading not set!"
msgstr ""
"In esecuzione in modalità sistema, ma --disallow-module-loading non "
"impostato."

#: ../src/daemon/main.c:584
msgid "Running in system mode, forcibly disabling SHM mode!"
msgstr ""
"In esecuzione in modalità sistema, disabilitata in modo forzoso la modalità "
"SHM."

#: ../src/daemon/main.c:589
msgid "Running in system mode, forcibly disabling exit idle time!"
msgstr ""
"In esecuzione in modalità sistema, disabilitato in modo forzoso il tempo di "
"uscita per inattività."

#: ../src/daemon/main.c:616
msgid "Failed to acquire stdio."
msgstr "Acquisizione di STDIO non riuscita."

#: ../src/daemon/main.c:622
#, c-format
msgid "pipe failed: %s"
msgstr "pipe non riuscita: %s"

#: ../src/daemon/main.c:627
#, c-format
msgid "fork() failed: %s"
msgstr "fork() non riuscita: %s"

#: ../src/daemon/main.c:641 ../src/utils/pacat.c:508
#, c-format
msgid "read() failed: %s"
msgstr "read() non riuscita: %s"

#: ../src/daemon/main.c:647
msgid "Daemon startup failed."
msgstr "Avvio del demone non riuscito."

#: ../src/daemon/main.c:649
msgid "Daemon startup successful."
msgstr "Avvio del demone riuscito."

#: ../src/daemon/main.c:726
#, c-format
msgid "This is PulseAudio %s"
msgstr "Questo è PulseAudio %s"

#: ../src/daemon/main.c:727
#, c-format
msgid "Compilation host: %s"
msgstr "Host di compilazione: %s"

#: ../src/daemon/main.c:728
#, c-format
msgid "Compilation CFLAGS: %s"
msgstr "CFLAGS di compilazione: %s"

#: ../src/daemon/main.c:731
#, c-format
msgid "Running on host: %s"
msgstr "In esecuzione sull'host: %s"

# evviva il rispetto della l10n!!!
#: ../src/daemon/main.c:734
#, c-format
msgid "Found %u CPUs."
msgstr "Trovate %u CPU."

#: ../src/daemon/main.c:736
#, c-format
msgid "Page size is %lu bytes"
msgstr "La dimensione di pagina è %lu byte"

#: ../src/daemon/main.c:739
msgid "Compiled with Valgrind support: yes"
msgstr "Compilato con supporto a Valgrind: sì"

#: ../src/daemon/main.c:741
msgid "Compiled with Valgrind support: no"
msgstr "Compilato con supporto a Valgrind: no"

#: ../src/daemon/main.c:744
#, c-format
msgid "Running in valgrind mode: %s"
msgstr "In esecuzione in modalità valgrind: %s"

#: ../src/daemon/main.c:747
msgid "Optimized build: yes"
msgstr "Build ottimizzata: sì"

#: ../src/daemon/main.c:749
msgid "Optimized build: no"
msgstr "Build ottimizzata: no"

#: ../src/daemon/main.c:753
msgid "NDEBUG defined, all asserts disabled."
msgstr "NDEBUG definito, tutte le dichiarazioni sono disabilitate."

#: ../src/daemon/main.c:755
msgid "FASTPATH defined, only fast path asserts disabled."
msgstr ""
"FASTPATH definito, solo le dichiarazioni veloci di path sono disabilitate."

#: ../src/daemon/main.c:757
msgid "All asserts enabled."
msgstr "Tutte le dichiarazioni sono abilitate."

#: ../src/daemon/main.c:761
msgid "Failed to get machine ID"
msgstr "Recupero dell'ID della macchina non riuscito"

#: ../src/daemon/main.c:764
#, c-format
msgid "Machine ID is %s."
msgstr "L'ID della macchina è %s"

#: ../src/daemon/main.c:768
#, c-format
msgid "Session ID is %s."
msgstr "L'ID della sessione è %s"

#: ../src/daemon/main.c:774
#, c-format
msgid "Using runtime directory %s."
msgstr "In uso directory di runtime %s."

#: ../src/daemon/main.c:779
#, c-format
msgid "Using state directory %s."
msgstr "In uso directory di stato %s."

#: ../src/daemon/main.c:782
#, c-format
msgid "Using modules directory %s."
msgstr "In uso directory dei moduli %s."

#: ../src/daemon/main.c:784
#, c-format
msgid "Running in system mode: %s"
msgstr "In esecuzione in modalità sistema: %s"

#: ../src/daemon/main.c:787
msgid ""
"OK, so you are running PA in system mode. Please note that you most likely "
"shouldn't be doing that.\n"
"If you do it nonetheless then it's your own fault if things don't work as "
"expected.\n"
"Please read http://pulseaudio.org/wiki/WhatIsWrongWithSystemMode for an "
"explanation why system mode is usually a bad idea."
msgstr ""
"PulseAudio è in esecuzione in modalità sistema. È sconsigliato eseguire "
"PulseAudio in questa modalità.\n"
"Continuando a usarlo in questo modo molte cose potrebbero non funzionare "
"come atteso.\n"
"Consultare http://pulseaudio.org/wiki/WhatIsWrongWithSystemMode per maggiori "
"informazioni sul perché la modalità sistema è una pessima idea."

#: ../src/daemon/main.c:804
msgid "pa_pid_file_create() failed."
msgstr "pa_pid_file_create() non riuscita."

# io mi domando e dico..... mah!
#: ../src/daemon/main.c:814
msgid "Fresh high-resolution timers available! Bon appetit!"
msgstr "Disponibili timer high-resolution freschi freschi! Buon appetito!"

# $REPEAT_PREVIOUS_COMMENT_HERE
#: ../src/daemon/main.c:816
msgid ""
"Dude, your kernel stinks! The chef's recommendation today is Linux with high-"
"resolution timers enabled!"
msgstr ""
"Hey, questo kernel è andato a male! Lo chef oggi raccomanda Linux con i "
"timer high-resolution abilitati!"

#: ../src/daemon/main.c:839
msgid "pa_core_new() failed."
msgstr "pa_core_new() non riuscita."

#: ../src/daemon/main.c:899
msgid "Failed to initialize daemon."
msgstr "Inizializzazione del demone non riuscita."

#: ../src/daemon/main.c:904
msgid "Daemon startup without any loaded modules, refusing to work."
msgstr "Avvio del demone senza alcun modulo caricato, rifiuta di lavorare."

#: ../src/daemon/main.c:921
msgid "Daemon startup complete."
msgstr "Completato l'avvio del demone."

#: ../src/daemon/main.c:927
msgid "Daemon shutdown initiated."
msgstr "Iniziato l'arresto del demone."

#: ../src/daemon/main.c:949
msgid "Daemon terminated."
msgstr "Demone terminato."

# mamma mia che impressione
#: ../src/daemon/cmdline.c:115
#, c-format
msgid ""
"%s [options]\n"
"\n"
"COMMANDS:\n"
"  -h, --help                            Show this help\n"
"      --version                         Show version\n"
"      --dump-conf                       Dump default configuration\n"
"      --dump-modules                    Dump list of available modules\n"
"      --dump-resample-methods           Dump available resample methods\n"
"      --cleanup-shm                     Cleanup stale shared memory "
"segments\n"
"      --start                           Start the daemon if it is not "
"running\n"
"  -k  --kill                            Kill a running daemon\n"
"      --check                           Check for a running daemon (only "
"returns exit code)\n"
"\n"
"OPTIONS:\n"
"      --system[=BOOL]                   Run as system-wide instance\n"
"  -D, --daemonize[=BOOL]                Daemonize after startup\n"
"      --fail[=BOOL]                     Quit when startup fails\n"
"      --high-priority[=BOOL]            Try to set high nice level\n"
"                                        (only available as root, when SUID "
"or\n"
"                                        with elevated RLIMIT_NICE)\n"
"      --realtime[=BOOL]                 Try to enable realtime scheduling\n"
"                                        (only available as root, when SUID "
"or\n"
"                                        with elevated RLIMIT_RTPRIO)\n"
"      --disallow-module-loading[=BOOL]  Disallow module user requested "
"module\n"
"                                        loading/unloading after startup\n"
"      --disallow-exit[=BOOL]            Disallow user requested exit\n"
"      --exit-idle-time=SECS             Terminate the daemon when idle and "
"this\n"
"                                        time passed\n"
"      --module-idle-time=SECS           Unload autoloaded modules when idle "
"and\n"
"                                        this time passed\n"
"      --scache-idle-time=SECS           Unload autoloaded samples when idle "
"and\n"
"                                        this time passed\n"
"      --log-level[=LEVEL]               Increase or set verbosity level\n"
"  -v                                    Increase the verbosity level\n"
"      --log-target={auto,syslog,stderr} Specify the log target\n"
"      --log-meta[=BOOL]                 Include code location in log "
"messages\n"
"      --log-time[=BOOL]                 Include timestamps in log messages\n"
"      --log-backtrace=FRAMES            Include a backtrace in log messages\n"
"  -p, --dl-search-path=PATH             Set the search path for dynamic "
"shared\n"
"                                        objects (plugins)\n"
"      --resample-method=METHOD          Use the specified resampling method\n"
"                                        (See --dump-resample-methods for\n"
"                                        possible values)\n"
"      --use-pid-file[=BOOL]             Create a PID file\n"
"      --no-cpu-limit[=BOOL]             Do not install CPU load limiter on\n"
"                                        platforms that support it.\n"
"      --disable-shm[=BOOL]              Disable shared memory support.\n"
"\n"
"STARTUP SCRIPT:\n"
"  -L, --load=\"MODULE ARGUMENTS\"         Load the specified plugin module "
"with\n"
"                                        the specified argument\n"
"  -F, --file=FILENAME                   Run the specified script\n"
"  -C                                    Open a command line on the running "
"TTY\n"
"                                        after startup\n"
"\n"
"  -n                                    Don't load default script file\n"
msgstr ""
"%s [OPZIONI]\n"
"\n"
"COMANDI:\n"
"  -h, --help                            Mostra questo aiuto\n"
"      --version                         Mostra la versione\n"
"      --dump-conf                       Riversa la configurazione "
"predefinita\n"
"      --dump-modules                    Riversa l'elenco dei moduli "
"disponibili\n"
"      --dump-resample-methods           Riversa i metodi di ricampionamento\n"
"                                         disponibili\n"
"      --cleanup-shm                     Pulisce i segmenti di memoria "
"condivisa\n"
"                                         esauriti\n"
"      --start                           Avvia il demone se non è in "
"esecuzione\n"
"  -k  --kill                            Uccide un demone in esecuzione\n"
"      --check                           Controlla la presenza di un demone "
"in\n"
"                                         esecuzione (restituisce solo il "
"codice\n"
"                                         di uscita)\n"
"\n"
"OPZIONI:\n"
"      --system[=BOOL]                   Esegue un'istanza di sistema\n"
"  -D, --daemonize[=BOOL]                Rende demone dopo l'avvio\n"
"      --fail[=BOOL]                     Esce quando l'avvio non riesce\n"
"      --high-priority[=BOOL]            Tenta di impostare un livello di "
"nice\n"
"                                         elevato (disponibile solo come "
"root,\n"
"                                         quando SUID o con RLIMIT_NICE "
"elevato)\n"
"      --realtime[=BOOL]                 Tenta di abilitare lo scheduling\n"
"                                         realtime (disponibile solo come "
"root,\n"
"                                         quando SUID o con RLIMIT_RTPRIO "
"elevato)\n"
"      --disallow-module-loading[=BOOL]  Rifiuta il caricamento/rimozione "
"dei\n"
"                                         moduli richiesti dall'utente dopo \n"
"                                         l'avvio\n"
"      --disallow-exit[=BOOL]            Rifiuta le richieste utente di "
"uscita\n"
"      --exit-idle-time=SECONDI          Termina il demone quando inattivo e "
"una\n"
"                                         volta trascorso questo tempo\n"
"      --module-idle-time=SECONDI        Rimuove i moduli caricati in modo\n"
"                                         automatico quando inattivo e una "
"volta\n"
"                                         trascorso questo tempo\n"
"      --scache-idle-time=SECONDI        Rimuove i campioni caricati in modo\n"
"                                         automatico quando inattivo e una "
"volta\n"
"                                         trascorso questo tempo\n"
"      --log-level[=LIVELLO]             Incrementa o imposta il livello di \n"
"                                         verbosità\n"
"  -v                                    Incrementa il livello di verbosità\n"
"      --log-target={auto,syslog,stderr} Specifica la destinazione del "
"registro\n"
"      --log-meta[=BOOL]                 Include la posizione del codice "
"nei \n"
"                                         messaggi di registro\n"
"      --log-time[=BOOL]                 Include i marcatempo nei messaggi "
"di\n"
"                                         registro\n"
"      --log-backtrace=FRAME             Include un backtrace nei messaggi "
"di \n"
"                                          registro\n"
"  -p, --dl-search-path=PERCORSO         Imposta il percorso di ricerca per "
"gli \n"
"                                         oggetti condivisi dinamici "
"(plugin)\n"
"      --resample-method=METODO         Usa il metodo di ricampionamento "
"indicato\n"
"                                        (vedere --dump-resample-methods per "
"i\n"
"                                        valori ammessi)\n"
"      --use-pid-file[=BOOL]             Crea un file PID\n"
"      --no-cpu-limit[=BOOL]             Non installa un limitatore di "
"carico\n"
"                                         della CPU sulle piattaforme che "
"lo \n"
"                                         supportano.\n"
"      --disable-shm[=BOOL]              Disabilita il supporto alla memoria\n"
"                                         condivisa.\n"
"\n"
"SCRIPT DI AVVIO:\n"
"  -L, --load=\"MODULO ARGOMENTI\"         Carica il modulo di plugin "
"specificato\n"
"                                         con gli argomenti specificati\n"
"  -F, --file=NOME_FILE                  Esegue lo script specificato\n"
"  -C                                    Apre una riga di comando sulla TTY "
"in \n"
"                                         esecuzione dopo l'avvio\n"
"\n"
"  -n                                    Non carica il file script "
"predefinito\n"

#: ../src/daemon/cmdline.c:247
msgid "--daemonize expects boolean argument"
msgstr "--daemonize richiede un argomento booleano"

#: ../src/daemon/cmdline.c:254
msgid "--fail expects boolean argument"
msgstr "--fail richiede un argomento booleano"

#: ../src/daemon/cmdline.c:264
msgid ""
"--log-level expects log level argument (either numeric in range 0..4 or one "
"of debug, info, notice, warn, error)."
msgstr ""
"--log-level richiede il livello di registro come argomento (sia "
"nell'intervallo numerico 0..4 oppure uno tra debug, info, notice, warn, "
"error)."

#: ../src/daemon/cmdline.c:276
msgid "--high-priority expects boolean argument"
msgstr "--high-priority richiede un argomento booleano"

#: ../src/daemon/cmdline.c:283
msgid "--realtime expects boolean argument"
msgstr "--realtime richiede un argomento booleano"

#: ../src/daemon/cmdline.c:290
msgid "--disallow-module-loading expects boolean argument"
msgstr "--disallow-module-loading richiede un argomento booleano"

#: ../src/daemon/cmdline.c:297
msgid "--disallow-exit expects boolean argument"
msgstr "--disallow-exit richiede un argomento booleano"

#: ../src/daemon/cmdline.c:304
msgid "--use-pid-file expects boolean argument"
msgstr "--use-pid-file richiede un argomento booleano"

#: ../src/daemon/cmdline.c:321
msgid "Invalid log target: use either 'syslog', 'stderr' or 'auto'."
msgstr ""
"Destinazione del registro non valida: usare \"syslog\", \"stderr\" o \"auto"
"\"."

#: ../src/daemon/cmdline.c:328
msgid "--log-time expects boolean argument"
msgstr "--log-time richiede un argomento booleano"

#: ../src/daemon/cmdline.c:335
msgid "--log-meta expects boolean argument"
msgstr "--log-meta richiede un argomento booleano"

#: ../src/daemon/cmdline.c:354
#, c-format
msgid "Invalid resample method '%s'."
msgstr "Metodo di ricampionamento \"%s\" non valido."

#: ../src/daemon/cmdline.c:361
msgid "--system expects boolean argument"
msgstr "--system richiede un argomento booleano"

#: ../src/daemon/cmdline.c:368
msgid "--no-cpu-limit expects boolean argument"
msgstr "--no-cpu-limit richiede un argomento booleano"

#: ../src/daemon/cmdline.c:375
msgid "--disable-shm expects boolean argument"
msgstr "--disable-shm richiede un argomento booleano"

#: ../src/daemon/dumpmodules.c:60
#, c-format
msgid "Name: %s\n"
msgstr "Nome: %s\n"

#: ../src/daemon/dumpmodules.c:63
#, c-format
msgid "No module information available\n"
msgstr "Nessuna informazione disponibile sul modulo\n"

#: ../src/daemon/dumpmodules.c:66
#, c-format
msgid "Version: %s\n"
msgstr "Versione: %s\n"

#: ../src/daemon/dumpmodules.c:68
#, c-format
msgid "Description: %s\n"
msgstr "Descrizione: %s\n"

#: ../src/daemon/dumpmodules.c:70
#, c-format
msgid "Author: %s\n"
msgstr "Autore: %s\n"

#: ../src/daemon/dumpmodules.c:72
#, c-format
msgid "Usage: %s\n"
msgstr "Uso: %s\n"

# %s è sì/no
#: ../src/daemon/dumpmodules.c:73
#, c-format
msgid "Load Once: %s\n"
msgstr "Caricato una sola volta: %s\n"

#: ../src/daemon/dumpmodules.c:75
#, c-format
msgid "DEPRECATION WARNING: %s\n"
msgstr "ATTENZIONE, DEPRECATI: %s\n"

#: ../src/daemon/dumpmodules.c:79
#, c-format
msgid "Path: %s\n"
msgstr "Percorso: %s\n"

#: ../src/daemon/daemon-conf.c:232
#, c-format
msgid "[%s:%u] Invalid log target '%s'."
msgstr "[%s:%u] Destinazione di registro \"%s\" non valida."

#: ../src/daemon/daemon-conf.c:248
#, c-format
msgid "[%s:%u] Invalid log level '%s'."
msgstr "[%s:%u] Livello di registro \"%s\" non valido."

#: ../src/daemon/daemon-conf.c:264
#, c-format
msgid "[%s:%u] Invalid resample method '%s'."
msgstr "[%s:%u] Metodo di ricampionamento \"%s\" non valido."

#: ../src/daemon/daemon-conf.c:287
#, c-format
msgid "[%s:%u] Invalid rlimit '%s'."
msgstr "[%s:%u] rlimit \"%s\" non valido."

#: ../src/daemon/daemon-conf.c:294
#, c-format
msgid "[%s:%u] rlimit not supported on this platform."
msgstr "[%s:%u] rlimit non supportato su questa piattaforma."

# o campionamento?? ma campionamento non è sampling?
#: ../src/daemon/daemon-conf.c:310
#, c-format
msgid "[%s:%u] Invalid sample format '%s'."
msgstr "[%s:%u] Formato di campionamento \"%s\" non valido."

#: ../src/daemon/daemon-conf.c:328
#, c-format
msgid "[%s:%u] Invalid sample rate '%s'."
msgstr "[%s:%u] Frequenza di campionamento '%s' non valida."

#: ../src/daemon/daemon-conf.c:352
#, c-format
msgid "[%s:%u] Invalid sample channels '%s'."
msgstr "[%s:%u] Canali di campionamento \"%s\" non validi."

#: ../src/daemon/daemon-conf.c:370
#, c-format
msgid "[%s:%u] Invalid channel map '%s'."
msgstr "[%s:%u] Mappa del canale \"%s\" non valida."

#: ../src/daemon/daemon-conf.c:388
#, c-format
msgid "[%s:%u] Invalid number of fragments '%s'."
msgstr "[%s:%u] Numero di frammenti \"%s\" non valido."

#: ../src/daemon/daemon-conf.c:406
#, c-format
msgid "[%s:%u] Invalid fragment size '%s'."
msgstr "[%s:%u] Dimensione dei frammenti \"%s\" non valida."

#: ../src/daemon/daemon-conf.c:424
#, c-format
msgid "[%s:%u] Invalid nice level '%s'."
msgstr "[%s:%u] Livello di nice \"%s\" non valido."

#: ../src/daemon/daemon-conf.c:546
#, c-format
msgid "Failed to open configuration file: %s"
msgstr "Apertura del file di configurazione non riuscita: %s"

#: ../src/daemon/daemon-conf.c:562
msgid ""
"The specified default channel map has a different number of channels than "
"the specified default number of channels."
msgstr ""
"La mappa del canale predefinita specificata presenta un numero diverso di "
"canali rispetto a quello predefinito specificato."

#: ../src/daemon/daemon-conf.c:638
#, c-format
msgid "### Read from configuration file: %s ###\n"
msgstr "### Lettura dal file di configurazione: %s ###\n"

#: ../src/daemon/caps.c:62
msgid "Cleaning up privileges."
msgstr "Abbandono dei privilegi."

#: ../src/daemon/pulseaudio.desktop.in.h:1
msgid "PulseAudio Sound System"
msgstr "Sistema sonoro PulseAudio"

#: ../src/daemon/pulseaudio.desktop.in.h:2
msgid "Start the PulseAudio Sound System"
msgstr "Avvia il sistema sonoro PulseAudio"

#: ../src/pulse/channelmap.c:105 ../src/pulse/channelmap.c:757
msgid "Mono"
msgstr "Mono"

# frontale centrale non si usa in HiFi
# solo centrale.
#: ../src/pulse/channelmap.c:107
msgid "Front Center"
msgstr "Centrale"

#: ../src/pulse/channelmap.c:108
msgid "Front Left"
msgstr "Frontale sinistro"

#: ../src/pulse/channelmap.c:109
msgid "Front Right"
msgstr "Frontale destro"

#: ../src/pulse/channelmap.c:111
msgid "Rear Center"
msgstr "Centrale posteriore"

#: ../src/pulse/channelmap.c:112
msgid "Rear Left"
msgstr "Posteriore sinistro"

#: ../src/pulse/channelmap.c:113
msgid "Rear Right"
msgstr "Posteriore destro"

#: ../src/pulse/channelmap.c:115
msgid "Low Frequency Emmiter"
msgstr "Emettitore basse frequenze"

#: ../src/pulse/channelmap.c:117
msgid "Front Left-of-center"
msgstr "Frontale sinistra-del-centro"

#: ../src/pulse/channelmap.c:118
msgid "Front Right-of-center"
msgstr "Frontale destra-del-centro"

#: ../src/pulse/channelmap.c:120
msgid "Side Left"
msgstr "Laterale sinistro"

#: ../src/pulse/channelmap.c:121
msgid "Side Right"
msgstr "Laterale destro"

#: ../src/pulse/channelmap.c:123
msgid "Auxiliary 0"
msgstr "Ausiliario 0"

#: ../src/pulse/channelmap.c:124
msgid "Auxiliary 1"
msgstr "Ausiliario 1"

#: ../src/pulse/channelmap.c:125
msgid "Auxiliary 2"
msgstr "Ausiliario 2"

#: ../src/pulse/channelmap.c:126
msgid "Auxiliary 3"
msgstr "Ausiliario 3"

#: ../src/pulse/channelmap.c:127
msgid "Auxiliary 4"
msgstr "Ausiliario 4"

#: ../src/pulse/channelmap.c:128
msgid "Auxiliary 5"
msgstr "Ausiliario 5"

#: ../src/pulse/channelmap.c:129
msgid "Auxiliary 6"
msgstr "Ausiliario 6"

#: ../src/pulse/channelmap.c:130
msgid "Auxiliary 7"
msgstr "Ausiliario 7"

#: ../src/pulse/channelmap.c:131
msgid "Auxiliary 8"
msgstr "Ausiliario 8"

#: ../src/pulse/channelmap.c:132
msgid "Auxiliary 9"
msgstr "Ausiliario 9"

#: ../src/pulse/channelmap.c:133
msgid "Auxiliary 10"
msgstr "Ausiliario 10"

#: ../src/pulse/channelmap.c:134
msgid "Auxiliary 11"
msgstr "Ausiliario 11"

#: ../src/pulse/channelmap.c:135
msgid "Auxiliary 12"
msgstr "Ausiliario 12"

#: ../src/pulse/channelmap.c:136
msgid "Auxiliary 13"
msgstr "Ausiliario 13"

#: ../src/pulse/channelmap.c:137
msgid "Auxiliary 14"
msgstr "Ausiliario 14"

#: ../src/pulse/channelmap.c:138
msgid "Auxiliary 15"
msgstr "Ausiliario 15"

#: ../src/pulse/channelmap.c:139
msgid "Auxiliary 16"
msgstr "Ausiliario 16"

#: ../src/pulse/channelmap.c:140
msgid "Auxiliary 17"
msgstr "Ausiliario 17"

#: ../src/pulse/channelmap.c:141
msgid "Auxiliary 18"
msgstr "Ausiliario 18"

#: ../src/pulse/channelmap.c:142
msgid "Auxiliary 19"
msgstr "Ausiliario 19"

#: ../src/pulse/channelmap.c:143
msgid "Auxiliary 20"
msgstr "Ausiliario 20"

#: ../src/pulse/channelmap.c:144
msgid "Auxiliary 21"
msgstr "Ausiliario 21"

#: ../src/pulse/channelmap.c:145
msgid "Auxiliary 22"
msgstr "Ausiliario 22"

#: ../src/pulse/channelmap.c:146
msgid "Auxiliary 23"
msgstr "Ausiliario 23"

#: ../src/pulse/channelmap.c:147
msgid "Auxiliary 24"
msgstr "Ausiliario 24"

#: ../src/pulse/channelmap.c:148
msgid "Auxiliary 25"
msgstr "Ausiliario 25"

#: ../src/pulse/channelmap.c:149
msgid "Auxiliary 26"
msgstr "Ausiliario 26"

#: ../src/pulse/channelmap.c:150
msgid "Auxiliary 27"
msgstr "Ausiliario 27"

#: ../src/pulse/channelmap.c:151
msgid "Auxiliary 28"
msgstr "Ausiliario 28"

#: ../src/pulse/channelmap.c:152
msgid "Auxiliary 29"
msgstr "Ausiliario 29"

#: ../src/pulse/channelmap.c:153
msgid "Auxiliary 30"
msgstr "Ausiliario 30"

#: ../src/pulse/channelmap.c:154
msgid "Auxiliary 31"
msgstr "Ausiliario 31"

#: ../src/pulse/channelmap.c:156
msgid "Top Center"
msgstr "Centrale superiore"

#: ../src/pulse/channelmap.c:158
msgid "Top Front Center"
msgstr "Superiore frontale centrale"

#: ../src/pulse/channelmap.c:159
msgid "Top Front Left"
msgstr "Superiore frontale sinistro"

#: ../src/pulse/channelmap.c:160
msgid "Top Front Right"
msgstr "Superiore frontale destro"

#: ../src/pulse/channelmap.c:162
msgid "Top Rear Center"
msgstr "Superiore posteriore centrale"

#: ../src/pulse/channelmap.c:163
msgid "Top Rear Left"
msgstr "Superiore posteriore sinistro"

#: ../src/pulse/channelmap.c:164
msgid "Top Rear Right"
msgstr "Superiore posteriore destro"

#: ../src/pulse/channelmap.c:484 ../src/pulse/sample.c:170
#: ../src/pulse/volume.c:295 ../src/pulse/volume.c:321
#: ../src/pulse/volume.c:341 ../src/pulse/volume.c:371
msgid "(invalid)"
msgstr "(non valido)"

#: ../src/pulse/channelmap.c:761
msgid "Stereo"
msgstr "Stereo"

#: ../src/pulse/channelmap.c:766
msgid "Surround 4.0"
msgstr "Surround 4.0"

#: ../src/pulse/channelmap.c:772
msgid "Surround 4.1"
msgstr "Surround 4.1"

#: ../src/pulse/channelmap.c:778
msgid "Surround 5.0"
msgstr "Surround 5.0"

#: ../src/pulse/channelmap.c:784
msgid "Surround 5.1"
msgstr "Surround 5.1"

#: ../src/pulse/channelmap.c:791
msgid "Surround 7.1"
msgstr "Surround 7.1"

#: ../src/pulse/error.c:43
msgid "OK"
msgstr "OK"

#: ../src/pulse/error.c:44
msgid "Access denied"
msgstr "Accesso negato"

#: ../src/pulse/error.c:45
msgid "Unknown command"
msgstr "Comando sconosciuto"

#: ../src/pulse/error.c:46
msgid "Invalid argument"
msgstr "Argomento non valido"

#: ../src/pulse/error.c:47
msgid "Entity exists"
msgstr "L'entità esiste"

#: ../src/pulse/error.c:48
msgid "No such entity"
msgstr "Entità inesistente"

#: ../src/pulse/error.c:49
msgid "Connection refused"
msgstr "Connessione rifiutata"

#: ../src/pulse/error.c:50
msgid "Protocol error"
msgstr "Errore di protocollo"

#: ../src/pulse/error.c:51
msgid "Timeout"
msgstr "Timeout"

#: ../src/pulse/error.c:52
msgid "No authorization key"
msgstr "Nessuna chiave di autorizzazione"

#: ../src/pulse/error.c:53
msgid "Internal error"
msgstr "Errore interno"

#: ../src/pulse/error.c:54
msgid "Connection terminated"
msgstr "Connessione terminata"

#: ../src/pulse/error.c:55
msgid "Entity killed"
msgstr "Entità uccisa"

#: ../src/pulse/error.c:56
msgid "Invalid server"
msgstr "Server non valido"

#: ../src/pulse/error.c:57
msgid "Module initalization failed"
msgstr "Inizializzazione del modulo non riuscita"

#: ../src/pulse/error.c:58
msgid "Bad state"
msgstr "Stato errato"

#: ../src/pulse/error.c:59
msgid "No data"
msgstr "Nessun dato"

#: ../src/pulse/error.c:60
msgid "Incompatible protocol version"
msgstr "Versione di protocollo incompatibile"

#: ../src/pulse/error.c:61
msgid "Too large"
msgstr "Troppo grande"

#: ../src/pulse/error.c:62
msgid "Not supported"
msgstr "Non supportato"

#: ../src/pulse/error.c:63
msgid "Unknown error code"
msgstr "Codice d'errore sconosciuto"

#: ../src/pulse/error.c:64
msgid "No such extension"
msgstr "Estensione inesistente"

#: ../src/pulse/error.c:65
msgid "Obsolete functionality"
msgstr "Funzionalità obsoleta"

#: ../src/pulse/error.c:66
msgid "Missing implementation"
msgstr "Implementazione mancante"

#: ../src/pulse/error.c:67
msgid "Client forked"
msgstr "Fork del client"

#: ../src/pulse/error.c:68
#, fuzzy
msgid "Input/Output error"
msgstr "Errore di input/output"

#: ../src/pulse/error.c:69
#, fuzzy
msgid "Device or resource busy"
msgstr "Dispositivo o risorsa occupata"

#: ../src/pulse/sample.c:172
#, c-format
msgid "%s %uch %uHz"
msgstr "%s ch %u %u Hz"

#: ../src/pulse/sample.c:184
#, c-format
msgid "%0.1f GiB"
msgstr "%0.1f GiB"

#: ../src/pulse/sample.c:186
#, c-format
msgid "%0.1f MiB"
msgstr "%0.1f MiB"

#: ../src/pulse/sample.c:188
#, c-format
msgid "%0.1f KiB"
msgstr "%0.1f KiB"

#: ../src/pulse/sample.c:190
#, c-format
msgid "%u B"
msgstr "%u B"

#: ../src/pulse/client-conf-x11.c:55 ../src/utils/pax11publish.c:100
msgid "XOpenDisplay() failed"
msgstr "XOpenDisplay() non riuscita"

#: ../src/pulse/client-conf-x11.c:93
msgid "Failed to parse cookie data"
msgstr "Analisi dei dati cookie non riuscita"

#: ../src/pulse/client-conf.c:111
#, c-format
msgid "Failed to open configuration file '%s': %s"
msgstr "Apertura del file di configurazione \"%s\" non riuscita: %s"

#: ../src/pulse/context.c:550
msgid "No cookie loaded. Attempting to connect without."
msgstr "Nessun cookie caricato. Tentativo di connettersi senza."

#: ../src/pulse/context.c:693
#, c-format
msgid "fork(): %s"
msgstr "fork(): %s"

#: ../src/pulse/context.c:748
#, c-format
msgid "waitpid(): %s"
msgstr "waitpid(): %s"

#: ../src/pulse/context.c:1438
#, c-format
msgid "Received message for unknown extension '%s'"
msgstr "Ricevuto messaggio per l'estensione sconosciuta \"%s\""

#: ../src/utils/pacat.c:108
#, c-format
msgid "Failed to drain stream: %s"
msgstr "Svuotamento dello stream non riuscito: %s"

#: ../src/utils/pacat.c:113
msgid "Playback stream drained."
msgstr "Stream di riproduzione svuotato."

#: ../src/utils/pacat.c:123
msgid "Draining connection to server."
msgstr "Svuotamento della connessione sul server."

#: ../src/utils/pacat.c:136
#, c-format
msgid "pa_stream_drain(): %s"
msgstr "pa_stream_drain(): %s"

#: ../src/utils/pacat.c:159
#, c-format
msgid "pa_stream_write() failed: %s"
msgstr "pa_stream_write() non riuscita: %s"

#: ../src/utils/pacat.c:197
#, c-format
msgid "pa_stream_begin_write() failed: %s"
msgstr "pa_stream_begin_write() non riuscita: %s"

#: ../src/utils/pacat.c:237 ../src/utils/pacat.c:267
#, c-format
msgid "pa_stream_peek() failed: %s"
msgstr "pa_stream_peek() non riuscita: %s"

#: ../src/utils/pacat.c:307
msgid "Stream successfully created."
msgstr "Creazione dello stream riuscita."

#: ../src/utils/pacat.c:310
#, c-format
msgid "pa_stream_get_buffer_attr() failed: %s"
msgstr "pa_stream_get_buffer_attr() non riuscita: %s"

# maxlength, fragsize e gli altri non so se vanno tradotti...
#: ../src/utils/pacat.c:314
#, c-format
msgid "Buffer metrics: maxlength=%u, tlength=%u, prebuf=%u, minreq=%u"
msgstr "Metriche del buffer: maxlength=%u, tlength=%u, prebuf=%u, minreq=%u"

# maxlength e fragsize non so se vanno tradotti...
#: ../src/utils/pacat.c:317
#, c-format
msgid "Buffer metrics: maxlength=%u, fragsize=%u"
msgstr "Metriche del buffer: maxlength=%u, fragsize=%u"

#: ../src/utils/pacat.c:321
#, c-format
msgid "Using sample spec '%s', channel map '%s'."
msgstr "In uso specifica di campionamento \"%s\", mappa dei canali \"%s\"."

#: ../src/utils/pacat.c:325
#, c-format
msgid "Connected to device %s (%u, %ssuspended)."
msgstr "Connesso al device %s (%u, %ssospeso)."

#: ../src/utils/pacat.c:335
#, c-format
msgid "Stream error: %s"
msgstr "Errore di stream: %s"

#: ../src/utils/pacat.c:345
#, c-format
msgid "Stream device suspended.%s"
msgstr "Device stream sospeso.%s "

#: ../src/utils/pacat.c:347
#, c-format
msgid "Stream device resumed.%s"
msgstr "Device stream ripristinato.%s "

#: ../src/utils/pacat.c:355
#, c-format
msgid "Stream underrun.%s"
msgstr "Underrun dello stream.%s"

#: ../src/utils/pacat.c:362
#, c-format
msgid "Stream overrun.%s"
msgstr "Overrun dello stream.%s"

#: ../src/utils/pacat.c:369
#, c-format
msgid "Stream started.%s"
msgstr "Stream avviato.%s"

#: ../src/utils/pacat.c:376
#, c-format
msgid "Stream moved to device %s (%u, %ssuspended).%s"
msgstr "Stream spostato sul device %s (%u, %ssospeso).%s"

#: ../src/utils/pacat.c:376
msgid "not "
msgstr "non "

#: ../src/utils/pacat.c:383
#, c-format
msgid "Stream buffer attributes changed.%s"
msgstr "Attributi del buffer di stream cambiati.%s"

#: ../src/utils/pacat.c:415
#, c-format
msgid "Connection established.%s"
msgstr "Connessione stabilita.%s"

#: ../src/utils/pacat.c:418
#, c-format
msgid "pa_stream_new() failed: %s"
msgstr "pa_stream_new() non riuscita: %s"

#: ../src/utils/pacat.c:450
#, c-format
msgid "pa_stream_connect_playback() failed: %s"
msgstr "pa_stream_connect_playback() non riuscita: %s"

#: ../src/utils/pacat.c:456
#, c-format
msgid "pa_stream_connect_record() failed: %s"
msgstr "pa_stream_connect_record() non riuscita: %s"

#: ../src/utils/pacat.c:470 ../src/utils/pactl.c:857
#, c-format
msgid "Connection failure: %s"
msgstr "Connessione non riuscita: %s"

#: ../src/utils/pacat.c:503
msgid "Got EOF."
msgstr "Ricevuto EOF."

#: ../src/utils/pacat.c:540
#, c-format
msgid "write() failed: %s"
msgstr "write() non riuscita: %s"

#: ../src/utils/pacat.c:561
msgid "Got signal, exiting."
msgstr "Ricevuto il segnale, uscita."

#: ../src/utils/pacat.c:575
#, c-format
msgid "Failed to get latency: %s"
msgstr "Recupero della latenza non riuscito: %s"

# dubbio: tempo o durata??
#: ../src/utils/pacat.c:580
#, c-format
msgid "Time: %0.3f sec; Latency: %0.0f usec."
msgstr "Tempo: %0.3f sec; Latenza: %0.0f microsec."

#: ../src/utils/pacat.c:599
#, c-format
msgid "pa_stream_update_timing_info() failed: %s"
msgstr "pa_stream_update_timing_info() non riuscita: %s"

#: ../src/utils/pacat.c:609
#, c-format
msgid ""
"%s [options]\n"
"\n"
"  -h, --help                            Show this help\n"
"      --version                         Show version\n"
"\n"
"  -r, --record                          Create a connection for recording\n"
"  -p, --playback                        Create a connection for playback\n"
"\n"
"  -v, --verbose                         Enable verbose operations\n"
"\n"
"  -s, --server=SERVER                   The name of the server to connect "
"to\n"
"  -d, --device=DEVICE                   The name of the sink/source to "
"connect to\n"
"  -n, --client-name=NAME                How to call this client on the "
"server\n"
"      --stream-name=NAME                How to call this stream on the "
"server\n"
"      --volume=VOLUME                   Specify the initial (linear) volume "
"in range 0...65536\n"
"      --rate=SAMPLERATE                 The sample rate in Hz (defaults to "
"44100)\n"
"      --format=SAMPLEFORMAT             The sample type, one of s16le, "
"s16be, u8, float32le,\n"
"                                        float32be, ulaw, alaw, s32le, s32be, "
"s24le, s24be,\n"
"                                        s24-32le, s24-32be (defaults to "
"s16ne)\n"
"      --channels=CHANNELS               The number of channels, 1 for mono, "
"2 for stereo\n"
"                                        (defaults to 2)\n"
"      --channel-map=CHANNELMAP          Channel map to use instead of the "
"default\n"
"      --fix-format                      Take the sample format from the sink "
"the stream is\n"
"                                        being connected to.\n"
"      --fix-rate                        Take the sampling rate from the sink "
"the stream is\n"
"                                        being connected to.\n"
"      --fix-channels                    Take the number of channels and the "
"channel map\n"
"                                        from the sink the stream is being "
"connected to.\n"
"      --no-remix                        Don't upmix or downmix channels.\n"
"      --no-remap                        Map channels by index instead of "
"name.\n"
"      --latency=BYTES                   Request the specified latency in "
"bytes.\n"
"      --process-time=BYTES              Request the specified process time "
"per request in bytes.\n"
"      --property=PROPERTY=VALUE         Set the specified property to the "
"specified value.\n"
"      --raw                             Record/play raw PCM data.\n"
"      --file-format=FFORMAT             Record/play formatted PCM data.\n"
"      --list-file-formats               List available file formats.\n"
msgstr ""
"%s [OPZIONI]\n"
"\n"
"  -h, --help                            Mostra questo aiuto\n"
"      --version                         Mostra la versione\n"
"\n"
"  -r, --record                          Crea una connessione per registrare\n"
"  -p, --playback                        Crea una connessione per riprodurre\n"
"\n"
"  -v, --verbose                         Abilita la modalità prolissa\n"
"\n"
"  -s, --server=SERVER                   Il nome del server a cui "
"connettersi\n"
"  -d, --device=DEVICE                   Il nome del sink/sorgente a cui\n"
"                                         connettersi\n"
"  -n, --client-name=NOME                Come chiamare questo client sul "
"server\n"
"      --stream-name=NOME                Come chiamare questo stream sul "
"server\n"
"      --volume=VOLUME                   Specifica il volume iniziale "
"(lineare) \n"
"                                         nell'intervallo 0...65536\n"
"      --rate=FREQ_CAMP                  La frequenza di campionamento in Hz\n"
"                                         (44100 come predefinita)\n"
"      --format=FORM_CAMP                Il tipo di campionamento. Valori "
"ammessi\n"
"                                         sono: s16le, s16be, u8, float32le,\n"
"                                         float32be, ulaw, alaw, s32le, "
"s32be\n"
"                                         (s16ne come predefinito)\n"
"      --channels=CANALI                 Il numero di canali, 1 per mono, 2 "
"per\n"
"                                         stereo (2 come predefinito)\n"
"      --channel-map=MAP_CANALI          La mappa dei canali da usare al "
"posto di\n"
"                                         quella predefinita\n"
"      --fix-format                      Recupera il formato di "
"campionamento\n"
"                                         dal sink a cui lo stream sta per "
"essere\n"
"                                         connesso\n"
"      --fix-rate                        Recupera la frequenza di "
"campionamento\n"
"                                         dal sink a cui lo stream sta per "
"essere\n"
"                                         connesso\n"
"      --fix-channels                    Recupera il numero di canali e la "
"mappa\n"
"                                         dei canali dal sink a cui lo "
"stream \n"
"                                         sta per essere connesso\n"
"      --no-remix                        Non esegue l'upmix o il downmix \n"
"                                         dei canali\n"
"      --no-remap                        Mappa i canali per indice invece "
"che \n"
"                                         per nome\n"
"      --latency=BYTE                    Richiede la latenza specificata in "
"byte\n"
"      --process-time=BYTE               Richiede il tempo di elaborazione "
"per\n"
"                                         richiesta specificato in byte\n"
"      --property=PROPRIETÀ=VAL          Imposta la proprietà al valore "
"specificato\n"
"      --raw                             Registra/riproduce dati PCM grezzi\n"
"      --file-format=FFORMAT             Registra/riproduce dati PCM "
"formattati\n"
"      --list-file-FORMATI               Elenca i formati disponibili.\n"

#: ../src/utils/pacat.c:731
#, c-format
msgid ""
"pacat %s\n"
"Compiled with libpulse %s\n"
"Linked with libpulse %s\n"
msgstr ""
"pacat %s\n"
"Compilato con libpulse %s\n"
"Link eseguito con libpulse %s\n"

#: ../src/utils/pacat.c:764 ../src/utils/pactl.c:953
#, c-format
msgid "Invalid client name '%s'"
msgstr "Nome del client \"%s\" non valido"

#: ../src/utils/pacat.c:779
#, c-format
msgid "Invalid stream name '%s'"
msgstr "Nome dello stream \"%s\" non valido"

#: ../src/utils/pacat.c:816
#, c-format
msgid "Invalid channel map '%s'"
msgstr "Mappa dei canali \"%s\" non valida"

#: ../src/utils/pacat.c:845
#, c-format
msgid "Invalid latency specification '%s'"
msgstr "Specifica di latenza \"%s\" non valida"

# esecuzione???
#: ../src/utils/pacat.c:852
#, c-format
msgid "Invalid process time specification '%s'"
msgstr "Specifica di tempo di elaborazione \"%s\" non valida"

#: ../src/utils/pacat.c:864
#, c-format
msgid "Invalid property '%s'"
msgstr "Proprietà \"%s\" non valida"

#: ../src/utils/pacat.c:881
#, c-format
msgid "Unknown file format %s."
msgstr "Formato file %s sconosciuto."

#: ../src/utils/pacat.c:900
msgid "Invalid sample specification"
msgstr "Specifica di campionamento non valida"

#: ../src/utils/pacat.c:910
#, c-format
msgid "open(): %s"
msgstr "open(): %s"

#: ../src/utils/pacat.c:915
#, c-format
msgid "dup2(): %s"
msgstr "dup2(): %s"

#: ../src/utils/pacat.c:922
msgid "Too many arguments."
msgstr "Troppi argomenti."

#: ../src/utils/pacat.c:933
msgid "Failed to generate sample specification for file."
msgstr "Generazione della specifica di campionamento per il file non riuscita."

#: ../src/utils/pacat.c:953
msgid "Failed to open audio file."
msgstr "Apertura del file audio non riuscita."

#: ../src/utils/pacat.c:959
msgid ""
"Warning: specified sample specification will be overwritten with "
"specification from file."
msgstr ""
"Attenzione: la specifica di campionamento indicata verrà soprascritta con "
"quella dal file."

#: ../src/utils/pacat.c:962 ../src/utils/pactl.c:997
msgid "Failed to determine sample specification from file."
msgstr "Determinazione della specifica di campionamento dal file non riuscita."

#: ../src/utils/pacat.c:971
msgid "Warning: Failed to determine channel map from file."
msgstr ""
"Attenzione: determinazione della mappa dei canali dal file non riuscita."

#: ../src/utils/pacat.c:982
msgid "Channel map doesn't match sample specification"
msgstr "La mappa dei canali non corrisponde alla specifica di campionamento"

#: ../src/utils/pacat.c:993
msgid "Warning: failed to write channel map to file."
msgstr "Attenzione: scrittura della mappa dei canali su file non riuscita."

#: ../src/utils/pacat.c:1008
#, c-format
msgid ""
"Opening a %s stream with sample specification '%s' and channel map '%s'."
msgstr ""
"Apertura di uno stream %s con specifica di campionamento \"%s\" e mappa dei "
"canali \"%s\"."

#: ../src/utils/pacat.c:1009
msgid "recording"
msgstr "registrazione"

#: ../src/utils/pacat.c:1009
msgid "playback"
msgstr "riproduzione"

#: ../src/utils/pacat.c:1035 ../src/utils/pactl.c:1267
msgid "pa_mainloop_new() failed."
msgstr "pa_mainloop_new() non riuscita."

#: ../src/utils/pacat.c:1054
msgid "io_new() failed."
msgstr "io_new() non riuscita."

#: ../src/utils/pacat.c:1061 ../src/utils/pactl.c:1279
msgid "pa_context_new() failed."
msgstr "pa_context_new() non riuscita."

#: ../src/utils/pacat.c:1069 ../src/utils/pactl.c:1285
#, c-format
msgid "pa_context_connect() failed: %s"
msgstr "pa_context_connect() non riuscita: %s"

#: ../src/utils/pacat.c:1075
msgid "pa_context_rttime_new() failed."
msgstr "pa_context_rttime_new() non riuscita."

#: ../src/utils/pacat.c:1082 ../src/utils/pactl.c:1290
msgid "pa_mainloop_run() failed."
msgstr "pa_mainloop_run() non riuscita."

#: ../src/utils/pasuspender.c:81
#, c-format
msgid "fork(): %s\n"
msgstr "fork(): %s\n"

#: ../src/utils/pasuspender.c:92
#, c-format
msgid "execvp(): %s\n"
msgstr "execvp(): %s\n"

#: ../src/utils/pasuspender.c:109
#, c-format
msgid "Failure to suspend: %s\n"
msgstr "Sospensione non riuscita: %s\n"

#: ../src/utils/pasuspender.c:124
#, c-format
msgid "Failure to resume: %s\n"
msgstr "Ripristino non riuscito: %s\n"

# cambiato un po' la parte finale...
#: ../src/utils/pasuspender.c:147
#, c-format
msgid "WARNING: Sound server is not local, not suspending.\n"
msgstr "ATTENZIONE: server audio non locale, impossibile sospendere.\n"

#: ../src/utils/pasuspender.c:159
#, c-format
msgid "Connection failure: %s\n"
msgstr "Connessione non riuscita: %s\n"

#: ../src/utils/pasuspender.c:176
#, c-format
msgid "Got SIGINT, exiting.\n"
msgstr "Ricevuto SIGINT, in uscita.\n"

#: ../src/utils/pasuspender.c:194
#, c-format
msgid "WARNING: Child process terminated by signal %u\n"
msgstr "ATTENZIONE: processo figlio terminato dal segnale %u\n"

#: ../src/utils/pasuspender.c:212
#, c-format
msgid ""
"%s [options] ... \n"
"\n"
"  -h, --help                            Show this help\n"
"      --version                         Show version\n"
"  -s, --server=SERVER                   The name of the server to connect "
"to\n"
"\n"
msgstr ""
"%s [OPZIONI] ... \n"
"\n"
"  -h, --help                            Mostra questo aiuto\n"
"      --version                         Mostra la versione\n"
"  -s, --server=SERVER                   Il nome del server a cui "
"connettersi\n"
"\n"

#: ../src/utils/pasuspender.c:248
#, c-format
msgid ""
"pasuspender %s\n"
"Compiled with libpulse %s\n"
"Linked with libpulse %s\n"
msgstr ""
"pasuspender %s\n"
"Compilato con libpulse %s\n"
"Link eseguito con libpulse %s\n"

#: ../src/utils/pasuspender.c:277
#, c-format
msgid "pa_mainloop_new() failed.\n"
msgstr "pa_mainloop_new() non riuscita.\n"

#: ../src/utils/pasuspender.c:290
#, c-format
msgid "pa_context_new() failed.\n"
msgstr "pa_context_new() non riuscita.\n"

#: ../src/utils/pasuspender.c:298
#, c-format
msgid "pa_mainloop_run() failed.\n"
msgstr "pa_mainloop_run() non riuscita.\n"

#: ../src/utils/pactl.c:135
#, c-format
msgid "Failed to get statistics: %s"
msgstr "Recupero delle statistiche non riuscito: %s"

#: ../src/utils/pactl.c:141
#, c-format
msgid "Currently in use: %u blocks containing %s bytes total.\n"
msgstr "Attualmente in uso: %u blocchi contenenti %s byte in totale.\n"

#: ../src/utils/pactl.c:144
#, c-format
msgid "Allocated during whole lifetime: %u blocks containing %s bytes total.\n"
msgstr ""
"Allocati durante l'intera esecuzione: %u blocchi contenenti %s byte in "
"totale.\n"

#: ../src/utils/pactl.c:147
#, c-format
msgid "Sample cache size: %s\n"
msgstr "Dimensione della cache dei campioni: %s\n"

#: ../src/utils/pactl.c:156
#, c-format
msgid "Failed to get server information: %s"
msgstr "Recupero delle informazioni del server non riuscito: %s"

#: ../src/utils/pactl.c:164
#, c-format
msgid ""
"User name: %s\n"
"Host Name: %s\n"
"Server Name: %s\n"
"Server Version: %s\n"
"Default Sample Specification: %s\n"
"Default Channel Map: %s\n"
"Default Sink: %s\n"
"Default Source: %s\n"
"Cookie: %08x\n"
msgstr ""
"Nome utente: %s\n"
"Nome host: %s\n"
"Nome server: %s\n"
"Versione server: %s\n"
"Specifica campionamento predefinita: %s\n"
"Mappa canale predefinita: %s\n"
"Sink predefinito: %s\n"
"Sorgente predefinita: %s\n"
"Cookie: %08x\n"

#: ../src/utils/pactl.c:205
#, c-format
msgid "Failed to get sink information: %s"
msgstr "Recupero delle informazioni del sink non riuscito: %s"

# nel relativo messaggio per il source
# c'è "monitor of sink", quindi assumo che
# qui dovesse essere "monitor of source"
#: ../src/utils/pactl.c:221
#, c-format
msgid ""
"Sink #%u\n"
"\tState: %s\n"
"\tName: %s\n"
"\tDescription: %s\n"
"\tDriver: %s\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tOwner Module: %u\n"
"\tMute: %s\n"
"\tVolume: %s%s%s\n"
"\t        balance %0.2f\n"
"\tBase Volume: %s%s%s\n"
"\tMonitor Source: %s\n"
"\tLatency: %0.0f usec, configured %0.0f usec\n"
"\tFlags: %s%s%s%s%s%s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Sink #%u\n"
"\tStato: %s\n"
"\tNome: %s\n"
"\tDescrizione: %s\n"
"\tDriver: %s\n"
"\tSpecifica di campionamento: %s\n"
"\tMappa dei canali: %s\n"
"\tModulo di appartenenza: %u\n"
"\tMuto: %s\n"
"\tVolume: %s%s%s\n"
"\t        bilanciamento %0.2f\n"
"\tVolume base: %s%s%s\n"
"\tMonitor della sorgente: %s\n"
"\tLatenza: %0.0f microsec, configurata %0.0f microsec\n"
"\tFlag: %s%s%s%s%s%s\n"
"\tProprietà:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:268 ../src/utils/pactl.c:360
#, c-format
msgid "\tPorts:\n"
msgstr "\tPorte:\n"

#: ../src/utils/pactl.c:274 ../src/utils/pactl.c:366
#, c-format
msgid "\tActive Port: %s\n"
msgstr "\tPorta attiva: %s\n"

#: ../src/utils/pactl.c:297
#, c-format
msgid "Failed to get source information: %s"
msgstr "Recupero delle informazioni della sorgente non riuscito: %s"

#: ../src/utils/pactl.c:313
#, c-format
msgid ""
"Source #%u\n"
"\tState: %s\n"
"\tName: %s\n"
"\tDescription: %s\n"
"\tDriver: %s\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tOwner Module: %u\n"
"\tMute: %s\n"
"\tVolume: %s%s%s\n"
"\t        balance %0.2f\n"
"\tBase Volume: %s%s%s\n"
"\tMonitor of Sink: %s\n"
"\tLatency: %0.0f usec, configured %0.0f usec\n"
"\tFlags: %s%s%s%s%s%s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Sorgente #%u\n"
"\tStato: %s\n"
"\tNome: %s\n"
"\tDescrizione: %s\n"
"\tDriver: %s\n"
"\tSpecifica di campionamento: %s\n"
"\tMappa dei canali: %s\n"
"\tModulo di appartenenza: %u\n"
"\tMuto: %s\n"
"\tVolume: %s%s%s\n"
"\t        bilanciamento %0.2f\n"
"\tVolume base: %s%s%s\n"
"\tMonitor del sink: %s\n"
"\tLatenza: %0.0f microsec, configurata %0.0f microsec\n"
"\tFlag: %s%s%s%s%s%s\n"
"\tProprietà:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:345 ../src/utils/pactl.c:401 ../src/utils/pactl.c:436
#: ../src/utils/pactl.c:473 ../src/utils/pactl.c:532 ../src/utils/pactl.c:533
#: ../src/utils/pactl.c:543 ../src/utils/pactl.c:587 ../src/utils/pactl.c:588
#: ../src/utils/pactl.c:594 ../src/utils/pactl.c:637 ../src/utils/pactl.c:638
#: ../src/utils/pactl.c:645
msgid "n/a"
msgstr "N/D"

#: ../src/utils/pactl.c:375
#, c-format
msgid "Failed to get module information: %s"
msgstr "Recupero delle informazioni del modulo non riuscito: %s"

#: ../src/utils/pactl.c:393
#, c-format
msgid ""
"Module #%u\n"
"\tName: %s\n"
"\tArgument: %s\n"
"\tUsage counter: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Modulo #%u\n"
"\tNome: %s\n"
"\tArgomento: %s\n"
"\tContatore utilizzi: %s\n"
"\tProprietà:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:412
#, c-format
msgid "Failed to get client information: %s"
msgstr "Recupero delle informazioni del client non riuscito: %s"

#: ../src/utils/pactl.c:430
#, c-format
msgid ""
"Client #%u\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Client #%u\n"
"\tDriver: %s\n"
"\tModulo di appartenenza: %s\n"
"\tProprietà:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:447
#, c-format
msgid "Failed to get card information: %s"
msgstr "Recupero delle informazioni della scheda non riuscito: %s"

#: ../src/utils/pactl.c:465
#, c-format
msgid ""
"Card #%u\n"
"\tName: %s\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Scheda #%u\n"
"\tNome: %s\n"
"\tDriver: %s\n"
"\tModulo di appartenenza: %s\n"
"\tProprietà:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:479
#, c-format
msgid "\tProfiles:\n"
msgstr "\tProfili:\n"

#: ../src/utils/pactl.c:485
#, c-format
msgid "\tActive Profile: %s\n"
msgstr "\tProfilo attivo: %s\n"

# Sink input
# A stream that is connected to an output device, i.e. an input for a sink.
#
# from http://pulseaudio.org/wiki/WritingVolumeControlUIs
#: ../src/utils/pactl.c:496
#, c-format
msgid "Failed to get sink input information: %s"
msgstr "Recupero delle informazioni dell'ingresso per il sink non riuscito: %s"

#: ../src/utils/pactl.c:515
#, c-format
msgid ""
"Sink Input #%u\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tClient: %s\n"
"\tSink: %u\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tMute: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        balance %0.2f\n"
"\tBuffer Latency: %0.0f usec\n"
"\tSink Latency: %0.0f usec\n"
"\tResample method: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Ingresso per sink #%u\n"
"\tDriver: %s\n"
"\tModulo di appartenenza: %s\n"
"\tClient: %s\n"
"\tSink: %u\n"
"\tSpecifica di campionamento: %s\n"
"\tMappa dei canali: %s\n"
"\tMuto: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        bilanciamento %0.2f\n"
"\tLatenza del buffer: %0.0f microsec\n"
"\tLatenza del sink: %0.0f microsec\n"
"\tMetodo di ricampionamento: %s\n"
"\tProprietà:\n"
"\t\t%s\n"

# Source output
# A stream that is connected to an input device, i.e. an output of a source.
#
# from http://pulseaudio.org/wiki/WritingVolumeControlUIs
#: ../src/utils/pactl.c:554
#, c-format
msgid "Failed to get source output information: %s"
msgstr ""
"Recupero delle informazioni dell'uscita per la sorgente non riuscito: %s"

#: ../src/utils/pactl.c:574
#, c-format
msgid ""
"Source Output #%u\n"
"\tDriver: %s\n"
"\tOwner Module: %s\n"
"\tClient: %s\n"
"\tSource: %u\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tBuffer Latency: %0.0f usec\n"
"\tSource Latency: %0.0f usec\n"
"\tResample method: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Uscita per sorgente #%u\n"
"\tDriver: %s\n"
"\tModulo di appartenenza: %s\n"
"\tClient: %s\n"
"\tSorgente: %u\n"
"\tSpecifica di campionamento: %s\n"
"\tMappa dei canali: %s\n"
"\tLatenza del buffer: %0.0f microsec\n"
"\tLatenza della sorgente: %0.0f microsec\n"
"\tMetodo di ricampionamento: %s\n"
"\tProprietà:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:605
#, c-format
msgid "Failed to get sample information: %s"
msgstr "Recupero delle informazioni del campione non riuscito: %s"

# campiona lazy??
#: ../src/utils/pactl.c:623
#, c-format
msgid ""
"Sample #%u\n"
"\tName: %s\n"
"\tSample Specification: %s\n"
"\tChannel Map: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        balance %0.2f\n"
"\tDuration: %0.1fs\n"
"\tSize: %s\n"
"\tLazy: %s\n"
"\tFilename: %s\n"
"\tProperties:\n"
"\t\t%s\n"
msgstr ""
"Campione #%u\n"
"\tNome: %s\n"
"\tSpecifica di campionamento: %s\n"
"\tMappa dei canali: %s\n"
"\tVolume: %s\n"
"\t        %s\n"
"\t        bilanciamento %0.2f\n"
"\tDurata: %0.1f s\n"
"\tDimensione: %s\n"
"\tLazy: %s\n"
"\tNome file: %s\n"
"\tProprietà:\n"
"\t\t%s\n"

#: ../src/utils/pactl.c:653 ../src/utils/pactl.c:663
#, c-format
msgid "Failure: %s"
msgstr "Fallimento: %s"

#: ../src/utils/pactl.c:687
#, c-format
msgid "Failed to upload sample: %s"
msgstr "Caricamento del campione non riuscito: %s"

#: ../src/utils/pactl.c:704
msgid "Premature end of file"
msgstr "Fine del file prematura"

#: ../src/utils/pactl.c:863
msgid "Got SIGINT, exiting."
msgstr "Ricevuto SIGINT, uscita."

#: ../src/utils/pactl.c:869
#, c-format
msgid ""
"%s [options] stat\n"
"%s [options] list\n"
"%s [options] exit\n"
"%s [options] upload-sample FILENAME [NAME]\n"
"%s [options] play-sample NAME [SINK]\n"
"%s [options] remove-sample NAME\n"
"%s [options] move-sink-input SINKINPUT SINK\n"
"%s [options] move-source-output SOURCEOUTPUT SOURCE\n"
"%s [options] load-module NAME [ARGS ...]\n"
"%s [options] unload-module MODULE\n"
"%s [options] suspend-sink SINK 1|0\n"
"%s [options] suspend-source SOURCE 1|0\n"
"%s [options] set-card-profile CARD PROFILE\n"
"%s [options] set-sink-port SINK PORT\n"
"%s [options] set-source-port SOURCE PORT\n"
"%s [options] set-sink-volume SINK VOLUME\n"
"%s [options] set-source-volume SOURCE VOLUME\n"
"%s [options] set-sink-input-volume SINKINPUT VOLUME\n"
"%s [options] set-sink-mute SINK 1|0\n"
"%s [options] set-source-mute SOURCE 1|0\n"
"%s [options] set-sink-input-mute SINKINPUT 1|0\n"
"\n"
"  -h, --help                            Show this help\n"
"      --version                         Show version\n"
"\n"
"  -s, --server=SERVER                   The name of the server to connect "
"to\n"
"  -n, --client-name=NAME                How to call this client on the "
"server\n"
msgstr ""
"%s [OPZIONI] stat\n"
"%s [OPZIONI] list\n"
"%s [OPZIONI] exit\n"
"%s [OPZIONI] upload-sample NOMEFILE [NOME]\n"
"%s [OPZIONI] play-sample NOME [SINK]\n"
"%s [OPZIONI] remove-sample NOME\n"
"%s [OPZIONI] move-sink-input SINKINPUT SINK\n"
"%s [OPZIONI] move-source-output SOURCEOUTPUT SORGENTE\n"
"%s [OPZIONI] load-module NOME [ARGOMENTI...]\n"
"%s [OPZIONI] unload-module MODULO\n"
"%s [OPZIONI] suspend-sink SINK 1|0\n"
"%s [OPZIONI] suspend-source SORGENTE 1|0\n"
"%s [OPZIONI] set-card-profile SCHEDA PROFILO\n"
"%s [OPZIONI] set-sink-port SINK PORTA\n"
"%s [OPZIONI] set-source-port SORGENTE PORTA\n"
"%s [OPZIONI] set-sink-volume SINK VOLUME\n"
"%s [OPZIONI] set-source-volume SORGENTE VOLUME\n"
"%s [OPZIONI] set-sink-input-volume SINKINPUT VOLUME\n"
"%s [OPZIONI] set-sink-mute SINK 1|0\n"
"%s [OPZIONI] set-source-mute SORGENTE 1|0\n"
"%s [OPZIONI] set-sink-input-mute SINKINPUT 1|0\n"
"\n"
"  -h, --help                       Mostra questo aiuto\n"
"      --version                    Mostra la versione\n"
"\n"
"  -s, --server=SERVER              Il nome del server a cui connettersi\n"
"  -n, --client-name=NOME           Come chiamare questo client sul server\n"

#: ../src/utils/pactl.c:933
#, c-format
msgid ""
"pactl %s\n"
"Compiled with libpulse %s\n"
"Linked with libpulse %s\n"
msgstr ""
"pactl %s\n"
"Compilato con libpulse %s\n"
"Link eseguito con libpulse %s\n"

#: ../src/utils/pactl.c:979
msgid "Please specify a sample file to load"
msgstr "Specificare un file campione da caricare"

#: ../src/utils/pactl.c:992
msgid "Failed to open sound file."
msgstr "Apertura del file audio non riuscita."

#: ../src/utils/pactl.c:1004
msgid "Warning: Failed to determine sample specification from file."
msgstr ""
"Attenzione: determinazione della specifica di campionamento dal file non "
"riuscita."

#: ../src/utils/pactl.c:1014
msgid "You have to specify a sample name to play"
msgstr "È necessario specificare un nome di campione da riprodurre"

#: ../src/utils/pactl.c:1026
msgid "You have to specify a sample name to remove"
msgstr "È necessario specificare un nome di campione da rimuovere"

#: ../src/utils/pactl.c:1035
msgid "You have to specify a sink input index and a sink"
msgstr "È necessario specificare un indice di ingresso per sink e un sink"

#: ../src/utils/pactl.c:1045
msgid "You have to specify a source output index and a source"
msgstr ""
"È necessario specificare una indice di uscita per sorgente e una sorgente"

#: ../src/utils/pactl.c:1060
msgid "You have to specify a module name and arguments."
msgstr "È necessario specificare un nome di modulo e gli argomenti."

#: ../src/utils/pactl.c:1080
msgid "You have to specify a module index"
msgstr "È necessario specificare un indice di modulo"

#: ../src/utils/pactl.c:1090
msgid ""
"You may not specify more than one sink. You have to specify a boolean value."
msgstr ""
"Non è possibile specificare più di un sink. È necessario specificare un "
"valore booleano."

#: ../src/utils/pactl.c:1103
msgid ""
"You may not specify more than one source. You have to specify a boolean "
"value."
msgstr ""
"Non è possibile specificare più di una sorgente. È necessario specificare un "
"valore booleano."

#: ../src/utils/pactl.c:1115
msgid "You have to specify a card name/index and a profile name"
msgstr ""
"È necessario specificare un nome/indice di scheda e un nome di profilo."

#: ../src/utils/pactl.c:1126
msgid "You have to specify a sink name/index and a port name"
msgstr "È necessario specificare un nome/indice di sink e un nome di porta"

#: ../src/utils/pactl.c:1137
msgid "You have to specify a source name/index and a port name"
msgstr "È necessario specificare un nome/indice di sorgente e un nome di porta"

#: ../src/utils/pactl.c:1149
msgid "You have to specify a sink name/index and a volume"
msgstr "È necessario specificare un nome/indice di sink e un nome di porta"

#: ../src/utils/pactl.c:1154 ../src/utils/pactl.c:1171
#: ../src/utils/pactl.c:1193 ../src/utils/pactl.c:1209
#: ../src/utils/pactl.c:1226 ../src/utils/pactl.c:1248
#, fuzzy
msgid "Invalid volume specification"
msgstr "Specifica di volume non valida"

#: ../src/utils/pactl.c:1166
msgid "You have to specify a source name/index and a volume"
msgstr "È necessario specificare un nome/indice di sorgente e un nome di porta"

#: ../src/utils/pactl.c:1183
msgid "You have to specify a sink input index and a volume"
msgstr "È necessario specificare un indice di ingresso per sink e un sink"

#: ../src/utils/pactl.c:1188
#, fuzzy
msgid "Invalid sink input index"
msgstr "Indice dell'input del sink non valido"

#: ../src/utils/pactl.c:1204
msgid "You have to specify a sink name/index and a mute boolean"
msgstr "È necessario specificare un nome/indice di sink e un nome di porta"

#: ../src/utils/pactl.c:1221
msgid "You have to specify a source name/index and a mute boolean"
msgstr "È necessario specificare un nome/indice di sorgente e un nome di porta"

#: ../src/utils/pactl.c:1238
msgid "You have to specify a sink input index and a mute boolean"
msgstr "È necessario specificare un indice di ingresso per sink e un sink"

#: ../src/utils/pactl.c:1243
#, fuzzy
msgid "Invalid sink input index specification"
msgstr "Specifica dell'indice di input del sink non valida"

#: ../src/utils/pactl.c:1262
msgid "No valid command specified."
msgstr "Nessun comando valido specificato."

#: ../src/utils/pax11publish.c:61
#, c-format
msgid ""
"%s [-D display] [-S server] [-O sink] [-I source] [-c file]  [-d|-e|-i|-r]\n"
"\n"
" -d    Show current PulseAudio data attached to X11 display (default)\n"
" -e    Export local PulseAudio data to X11 display\n"
" -i    Import PulseAudio data from X11 display to local environment "
"variables and cookie file.\n"
" -r    Remove PulseAudio data from X11 display\n"
msgstr ""
"%s [-D DISPLAY] [-S SERVER] [-O SINK] [-I SORGENTE] [-c FILE]  [-d|-e|-i|-"
"r]\n"
"\n"
" -d    Mostra i dati PulseAudio attuali collegati al display X11 (predef)\n"
" -e    Esporta i dati PulseAudio locali sul display X11\n"
" -i    Importa i dati PulseAudio dal display X11 alle variabili d'ambiente "
"e\n"
"        al file cookie locali \n"
" -r    Rimuove i dati PulseAudio dal display X11\n"

#: ../src/utils/pax11publish.c:94
#, c-format
msgid "Failed to parse command line.\n"
msgstr "Analisi della riga di comando non riuscita.\n"

#: ../src/utils/pax11publish.c:108
#, c-format
msgid "Server: %s\n"
msgstr "Server: %s\n"

#: ../src/utils/pax11publish.c:110
#, c-format
msgid "Source: %s\n"
msgstr "Sorgente: %s\n"

#: ../src/utils/pax11publish.c:112
#, c-format
msgid "Sink: %s\n"
msgstr "Sink: %s\n"

#: ../src/utils/pax11publish.c:114
#, c-format
msgid "Cookie: %s\n"
msgstr "Cookie: %s\n"

#: ../src/utils/pax11publish.c:132
#, c-format
msgid "Failed to parse cookie data\n"
msgstr "Analisi dei dati cookie non riuscita\n"

#: ../src/utils/pax11publish.c:137
#, c-format
msgid "Failed to save cookie data\n"
msgstr "Salvataggio dei dati cookie non riuscito\n"

#: ../src/utils/pax11publish.c:152
#, c-format
msgid "Failed to load client configuration file.\n"
msgstr "Caricamento del file di configurazione del client non riuscito.\n"

#: ../src/utils/pax11publish.c:157
#, c-format
msgid "Failed to read environment configuration data.\n"
msgstr "Lettura dei dati di configurazione dell'ambiente non riuscita.\n"

#: ../src/utils/pax11publish.c:174
#, c-format
msgid "Failed to get FQDN.\n"
msgstr "Recupero del FQDN non riuscito.\n"

#: ../src/utils/pax11publish.c:194
#, c-format
msgid "Failed to load cookie data\n"
msgstr "Caricamento dei dati cookie non riuscito\n"

#: ../src/utils/pax11publish.c:211
#, c-format
msgid "Not yet implemented.\n"
msgstr "Non ancora implementato.\n"

#: ../src/utils/pacmd.c:69
msgid "No PulseAudio daemon running, or not running as session daemon."
msgstr ""
"Nessun demone PulseAudio in esecuzione o non in esecuzione come demone di "
"sessione."

#: ../src/utils/pacmd.c:74
#, c-format
msgid "socket(PF_UNIX, SOCK_STREAM, 0): %s"
msgstr "socket(PF_UNIX, SOCK_STREAM, 0): %s"

#: ../src/utils/pacmd.c:91
#, c-format
msgid "connect(): %s"
msgstr "connect(): %s"

#: ../src/utils/pacmd.c:99
msgid "Failed to kill PulseAudio daemon."
msgstr "Uccisione del demone PulseAudio non riuscita."

#: ../src/utils/pacmd.c:107
msgid "Daemon not responding."
msgstr "Il demone non sta rispondendo."

#: ../src/utils/pacmd.c:161
#, c-format
msgid "poll(): %s"
msgstr "poll(): %s"

#: ../src/utils/pacmd.c:171 ../src/utils/pacmd.c:188
#, c-format
msgid "read(): %s"
msgstr "read(): %s"

#: ../src/utils/pacmd.c:207 ../src/utils/pacmd.c:223
#, c-format
msgid "write(): %s"
msgstr "write(): %s"

#: ../src/pulsecore/lock-autospawn.c:136 ../src/pulsecore/lock-autospawn.c:219
msgid "Cannot access autospawn lock."
msgstr "Impossibile accedere al lock di autospawn."

#: ../src/modules/alsa/alsa-sink.c:530 ../src/modules/alsa/alsa-sink.c:689
#, c-format
msgid ""
"ALSA woke us up to write new data to the device, but there was actually "
"nothing to write!\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers.\n"
"We were woken up with POLLOUT set -- however a subsequent snd_pcm_avail() "
"returned 0 or another value < min_avail."
msgstr ""
"Attivazione da parte di ALSA per scrivere nuovi dati sul dispositivo, ma non "
"c'era nulla da scrivere.\n"
"Molto probabilmente si tratta di un bug nei driver ALSA \"%s\". Segnalare "
"questo problema agli sviluppatori di ALSA.\n"
"Attivazione avvenuta con POLLOUT impostato -- tuttavia, una successiva "
"snd_pcm_avail() ha ritornato 0 o un altro valore < min_avail."

#: ../src/modules/alsa/alsa-source.c:506 ../src/modules/alsa/alsa-source.c:656
#, c-format
msgid ""
"ALSA woke us up to read new data from the device, but there was actually "
"nothing to read!\n"
"Most likely this is a bug in the ALSA driver '%s'. Please report this issue "
"to the ALSA developers.\n"
"We were woken up with POLLIN set -- however a subsequent snd_pcm_avail() "
"returned 0 or another value < min_avail."
msgstr ""
"Attivazione da parte di ALSA per leggere nuovi dati dal dispositivo, ma non "
"c'era nulla da leggere.\n"
"Molto probabilmente si tratta di un bug nei driver ALSA \"%s\". Segnalare "
"questo problema agli sviluppatori di ALSA.\n"
"Attivazione avvenuta con POLLIN impostato -- tuttavia, una successiva "
"snd_pcm_avail() ha ritornato 0 o un altro valore < min_avail."

#: ../src/modules/alsa/module-alsa-card.c:152
#: ../src/modules/bluetooth/module-bluetooth-device.c:2228
msgid "Off"
msgstr "Spento"

#: ../src/modules/bluetooth/module-bluetooth-device.c:2184
msgid "High Fidelity Playback (A2DP)"
msgstr "Riproduzione ad alta fedeltà (A2DP)"

#: ../src/modules/bluetooth/module-bluetooth-device.c:2198
msgid "High Fidelity Capture (A2DP)"
msgstr "Cattura ad alta fedeltà (A2DP)"

#: ../src/modules/bluetooth/module-bluetooth-device.c:2213
msgid "Telephony Duplex (HSP/HFP)"
msgstr "Doppino telefonico (HSP/HFP)"

#: ../src/modules/reserve-wrap.c:151
msgid "PulseAudio Sound Server"
msgstr "Server sonoro PulseAudio"

-- 
Milo Casagrande <milo@casagrande.name>


Maggiori informazioni sulla lista tp